-- Soldier On! --
-
@Rizio Il Ghiro said:
Thanks for that explanation - I for one certainly learned something new, Comis!
Day 61 (D+60)
It’ll be another day at the keyboard, but on firing up the computer, the trackpad tells me the batteries are running low already - shows how much I’ve been using it I suppose! At least swapping eneloops around isn’t that much of a problem! The keyboard is still at 85%….

I have a dumb home improvement question for everyone--I recently got a electric hand drill and was drilling holes on metal carbinet frames.
I noticed I did need to exert a fair amount of force in order for the drill bit to go thru that 2mm sheet, but if I push too hard the chuck will no longer be able to hold onto the drill bit, and the bit may loosen and slide all the way inwards. Once I created a 2-3mm lead hole, enlarging the hole was way easier.
I have some experience with a drill press, and holding onto the drill bit never seem to be a problem(the chuck wasn't keyless). But these keyless chuck on electric hand drill seemed weaker.
Is there anyway to deal with this? Will changing to all metal chuck solve the problem? Or do people simply let the drill bit slide all the way in, before enclosing the grip?(which may cut and ruin the grip if it slip under pressure?)
-
Are you locking the chuck? Crank and tighten down on the bit then go back the other way a click.
-
Day 59
Catchup day 59
Tinkering in workshop
-
Day 60
Catch-up day 60.
Leaving drinks for a colleague yesterday. Somehow managed to forget to post……
-
for my GSMRE i managed to procure hot beverage components .
i drink tea,specifically the Five Roses "Ceylon or African blend". i'm not a fan of the Rooibos [Afrikaans for redbush] tea but it will do in a pinch.
i like coffee with a lot of milk,and sugar.<a href="https://flic.kr/p/2nbQ69s" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51974732318_6e34791598.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20220401_063231 by Humayd a r Mahomedy, on Flickr
Day 59
all packed up
<a href="https://flic.kr/p/2nbRmz3" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/51974979316_d76215e320.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20220401_114147 by Humayd a r Mahomedy, on Flickr -
@zoidberg said:
Are you locking the chuck? Crank and tighten down on the bit then go back the other way a click.Thanks, zoidberg! Did that, but the dilemma was either I didn't exert enough force so the drill bit wasn't penetrating/drilling into the metal, or I exert too much and the bit just slid backwards into the chuck.
I have a few bits that were long enough, so the end could touch the retaining screw while the grip of the chuck are stilling holding onto the shank, instead of the flute/sharp part. Those seem to be fine even I exert a lot of force while drilling very slowly. But the short bits do tend to slip backwards more, especially without backing all the way into the chuck. These seem to be a common problem amongst the chuck with plastic parts.

-
Day 60: Used the combo tool to get a piece of gravel out of the tread of my running shoes.

-
@comis said:
Once I created a 2-3mm lead hole, enlarging the hole was way easier.Some bits have a faceted shank, that prevents slipping.
Regardless, when using one of those stepped bits to enlarge a hole, I usually drill a 'pilot hole' with a standard bit first. Sounds like that was solution you landed on anyway.

-
D +61
Used to assemble two cabinets

-
GAK day 61

-
day 61
Beer Time!!!!

-
D+60
More post...

-
Day 61:
Sent fra min M2002J9G via Tapatalk

-
Day 61
Today the 'ol Soldier helped with a litle garden hose project...



-
Awl-ways nice to be able to get the ketchup open.....

-
Day 61! Picked up a new car today, no uses for the PMBB. Here it is next to a couple Hartkopf friends.

Sent from my iPhone using Tapatalk
-
Day 60: Old school cool!

-
Day 62
To celebrate the Fools Of April challenge currently running, here’s my 08 posing with the Fools Of April 2021 prize, very generously donated by our host Nix, a gentleman and a scholar


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

