What did you use your Leatherman for today?
-
@Poncho65 said:
That is great Davis
don't believe I have had either of those greens
look a lot like turnip greens and spinach though and I like both of those

Thanks Poncho ! The dock is kind of like wild spinach. Where I grew up (farther north and lower attitude) there was a different kind of dock that looked a bit different and tasted a bit different.
The nettle, according to Wikipedia, do grow in North America but probably not everywhere, my guess would be the states in roughly the same distance from the Equator as Bulgaria. If you've ever encountered that plant you'd never forget it - it doesn't leave permanent damage but it stings like hell and the stung can be felt for few days after that.@rishardh said:
Multiple MTs used in a day, nice [emoji106]. Enjoyed reading your time with the Surge, Crunch and Rebar, all great MTs.Sent from my iPhone using Tapatalk
Thank you :)
-
@DavisNikolov said:
Thanks Poncho ! The dock is kind of like wild spinach. Where I grew up (farther north and lower attitude) there was a different kind of dock that looked a bit different and tasted a bit different.
The nettle, according to Wikipedia, do grow in North America but probably not everywhere, my guess would be the states in roughly the same distance from the Equator as Bulgaria. If you've ever encountered that plant you'd never forget it - it doesn't leave permanent damage but it stings like hell and the stung can be felt for few days after that.
Thank you :)When I was a lad dock leaves is what we used on nettle stings, so seeing them paired together was amusing!

-
Used my Sidekick blade to cut belt off machine. Needed replacing and quickest way was to cut it.
Sent from my SM-A326U using Tapatalk
-
@GearedForwards said:
When I was a lad dock leaves is what we used on nettle stings, so seeing them paired together was amusing!
That's new for me :o
I guess you crush it and rub it on the stung ? -
@DavisNikolov said:
That's new for me :o
I guess you crush it and rub it on the stung ?I can't speak for how effective it is, but I remember it helping take the worst off

Lightly crush in the hand and then rub into the sting enough that the leaf begins to break down and leave a bit of residue, it doesn't get rid of it completely, but it takes the edge off!
-
Awesome, will try it next time. Thank you

-
Do you ever feel like there is a Leatherman for every occasion? Of all my multitools, the Free P4 was the only one with a flathead small enough to reach the adjustment screws for my new reflex sight. I'll admit I wasn't overly exited about the combined awl and flat head, but look at that! :D

-
@nakken said:
Do you ever feel like there is a Leatherman for every occasion?Indeed I do. It's awlways nice to find that just perfect tool!
The lady of the house asked me if I had a supply of replacement tweezers for her Victorinox Classic SD. (Of course I do.) I gave her a new pair and attempted to turn the old ones into "bushcraft tweezers." The Juice Pro's file helped in that endeavor. Now I just need to come up with something better to hold the tweezers while filing them...
[attach id=0 msg=2332662]
[attach id=1 msg=2332662]
[attach id=2 msg=2332662]



-
@Farmer X said:
Indeed I do. It's awlways nice to find that just perfect tool!The lady of the house asked me if I had a supply of replacement tweezers for her Victorinox Classic SD. (Of course I do.) I gave her a new pair and attempted to turn the old ones into "bushcraft tweezers." The Juice Pro's file helped in that endeavor. Now I just need to come up with something better to hold the tweezers while filing them...
[attach id=0 msg=2332662]
[attach id=1 msg=2332662]
[attach id=2 msg=2332662]
Nice work
I use coffee powder for small cuts. -
At work, I carry around a small assortment of tools. I figured Id add one of my many leathermans to reduce the tool size and amounts. So I put in the sidekick.
I was changing a diverter gate for the letter sorting machine. There's 2 plugs that are usually hard to come apart (since they arent changed too often). Used diagonal cutters to grip one side and sidekick other. Popped right off! Including the connector. Paid by the hour not the job :)
Sent from my SM-A326U using Tapatalk
-
Needed to wire a heating lamp for the babies. So me and the Curl got onto it :


Since the Curl don't have wire crimper I tried to do it with the pliers. The result was not great.

So I took out the ST300 and continued the job with it. I like it's screwdrivers better anyway so...


So here is the nursery, waiting for the inhabitants any minute now

Peekaboo


-
@DavisNikolov said:
Needed to wire a heating lamp for the babies. So me and the Curl got onto it :

Since the Curl don't have wire crimper I tried to do it with the pliers. The result was not great.

So I took out the ST300 and continued the job with it. I like it's screwdrivers better anyway so...


So here is the nursery, waiting for the inhabitants any minute now

Peekaboo


Nice action shots
. Why did the ST 300 join the party? For the Crimper I guess.When are they going to hatch? This reminded me of my Grandma's ducklings.
-
Nice action shots!
Did not take Action shots, but the new addition to the collection (B.O. Wave+) was used to open a little bag with an Arduino Pro Micro.

-
@rishardh said:
Nice action shots
. Why did the ST 300 join the party? For the Crimper I guess.When are they going to hatch? This reminded me of my Grandma's ducklings.
Yep, for the crimper. At the time of taking the photos there were already eggs cracked - you can see it in the last picture. First chicken got out few hours later. They are out now, running around their temporary home in my workshop. First time ever I am doing such things on my own. I find myself thinking about and calling memories of my grandmother a lot during this process.
@LanWolf said:
Nice action shots!Did not take Action shots, but the new addition to the collection (B.O. Wave+) was used to open a little bag with an Arduino Pro Micro.

Thank you ! Nice tool !
Here is a chicken portrait.

-
@DavisNikolov said:
Yep, for the crimper. At the time of taking the photos there were already eggs cracked - you can see it in the last picture. First chicken got out few hours later. They are out now, running around their temporary home in my workshop. First time ever I am doing such things on my own. I find myself thinking about and calling memories of my grandmother a lot during this process.Thank you ! Nice tool !
Here is a chicken portrait.

Very cool and the best of luck with the chicks. They seem to be doing great. We both had grandmothers who hatched birds of some sort
I only picked up her habit of not throwing away used hardware. -
@DavisNikolov said:
Here is a chicken portrait.
Do you happen to know what breeds they are? -
Yep, the dark ones are black australorp. The two yellow ones are a mix from my Lohman brown hens and a big white rooster (don't think he belongs to any breed). I did a lot of reading about breeds before getting those australorp eggs. Main reason for choosing them is that among the mid size birds they are supposedly quite heat tolerant, being bred in Australia. And summers around here get pretty hot in the recent years. But when I went to pick the eggs I ordered the breeder also had Orpingtons (which I did not choose because they would not take heat as well) and after seeing that breed in person - now I want them too. Trouble is I am limited in the number of birds I can have since I live in a city...
When I was a kid in the village of my grandmother I used to breed pigeons. A lot of them and a lot of breeds. Now this passion has reignited, though being a bit more utilitarian with the chickens :D -
Hope your little ones do well. We at the Farmer X homestead sometimes watch a YouTuber who has a few different breeds of chickens.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login