What's your latest flashlight?
-
My latest flashlight is a Streamlight Microstream USB. I bought it to replace my Olight i3T after I finally got tired of the Ollight's insatiable battery diet and excess heat. Before the Olight, I carried a regular Microstream for six years, so it's nice to find an upgraded version of my old standby.
I really like the sleeve that slides forward to provide a more focused beam; the product literature doesn't even mention this feature, only that it slides forward to reveal the charging port. As an engineer, I love to see dual-function components in products.

-
@hsherzfeld said:
My latest flashlight is a Streamlight Microstream USB. I bought it to replace my Olight i3T after I finally got tired of the Ollight's insatiable battery diet and excess heat. Before the Olight, I carried a regular Microstream for six years, so it's nice to find an upgraded version of my old standby.I really like the sleeve that slides forward to provide a more focused beam; the product literature doesn't even mention this feature, only that it slides forward to reveal the charging port. As an engineer, I love to see dual-function components in products.
It's possible that it was accidental, does it have a mag lense like normal zoomies?

-
@GearedForwards said:
It's possible that it was accidental, does it have a mag lense like normal zoomies?
No, the lens itself doesn't move, but the aluminum sleeve around the front half of the light slides forward to expose the charging port. Sliding it forward when the light is on basically halves the size of the light spot (by eliminating spillover light, I guess).
-
I do have the Rider RX. This is a EDC light with fidgety.

-
Last night I got a Nitecore tiki, it was a present, but something I’ve wanted for a while, at first the kid didn’t think I’d really want it but when the Mrs turned the lights out so I could test it out his face lit up, so later I was explaining a few thing of it and he was liking it, I fully charged my old one which was the tube, then charged this one and put it in its place and gave the kid the tube, cause he was really liking how small these lights were and how much light they pumped out, grant it yeah the tube didn’t have as much but still a good amount, so I’ll have to get used to all the extra codes to use each setting on this new one, but I like it!
JR
-
These lights really came a long way. I like it. Nice and easy to carry which means you'll actually carry it. The kids gets a nice light too with the Tube. WIN/WIN.
-
Two legos that I've managed to put together.
First one was done by Tad's Customs.It's a very old but very cool Surfire KL3 head.I bought two of these 15-18 years ago.One remains NIB while the other was modified by Tad to produce about 1,150 lumens.I placed it onto a 2012 Surefire C2 Centurian body.
The second is another Surfire body,a 2009 6P, with a clicky tailcap,bored to accept 18650 batts and using a head that produces 80,360 and 700 lumens.This has a very tight hot spot with enough spill to identify objects 20 feet to either side of the hotspot at 50 yards.


-
@toolguy said:
Two legos that I've managed to put together.First one was done by Tad's Customs.It's a very old but very cool Surfire KL3 head.I bought two of these 15-18 years ago.One remains NIB while the other was modified by Tad to produce about 1,150 lumens.I placed it onto a 2012 Surefire C2 Centurian body.
The second is another Surfire body,a 2009 6P, with a clicky tailcap,bored to accept 18650 batts and using a head that produces 80,360 and 700 lumens.This has a very tight hot spot with enough spill to identify objects 20 feet to either side of the hotspot at 50 yards.
Very nice.
-
Thanks Sherry.
There's something unique about these large,finned heads, that I find very cool.
I have another Surefire E series that I'm working on. This lego is taking a different direction.
This will have a very small head,which is the same diameter as the body.It will have a 3 modes with 1K lumens top end.These bodies are too small to bore,so it will run an 16650,2400mAh L-lion battery and a clickie tailcap.
-
There's something unique about these large,finned heads, that I find very cool.
I have another Surefire E series that I'm working on. This lego is taking a different direction.
This will have a very small head,which is the same diameter as the body.It will have a 3 modes with 1K lumens top end.These bodies are too small to bore,so it will run an 16650,2400mAh L-lion battery and a clickie tailcap.
That sounds real nice. I’m always intrigued what knowledgeable people can do with flashlights.
-
It has been a long while since I got a real (non Chinese) new flashlight (torch for the European side of the pond*) and today I took the opportunity to combine my first. ever. visit to a Bass Pro store (for the curious, the one in the Dolphin Mall outside Miami) with the need for filling several gaps: I had forgotten to pack a reduced size flashlight for the trip, and back home all the Maglite 2AAs have succumbed to one of two ailments: either run-out batteries (Duracells) and ensuing refusal to operate, or only the latter without showing probable cause. Anyway, apparently there is an affiliation between Cabela's and Bass Pro, and the store is a ginormous feast for my eyes (if not for those of my wife's, as she elected to wait outside for reasons unknown). They also stocked just about the full complement of Leatherman's offerings, short of the (Mr) Crunch (as expected) and, alas, any specials, so no score there.
I'm looking forward to charging my new acquisition at Hyatt's cost 😉 and trying it out. It is my first real foray into modern rechargeable LED tech lights, barring a cheap Chinese set I bought recently and which so far performs surprisingly well. Stay tuned.
*) Opinions vary
[attach id=0 msg=2333436]

-
Additional info from the instructions, verified in part:
- 3 brightness modes, ie 2 reduced down from an advertised 1000 lumen (3h endurance) to 500 (4h) and 100 (15h) selectable with the light on (ie after a full press) by pressing the switch halfway, plus a strobe mode which activates by a half press followed by a full press
- tail cap switch and a port (coaxial??) for a USB cable for charging the battery inside the light: the rubber switch cover has a cap extension for the port which however does not fit very well
- additional USB to micro USB cable for charging the battery (Cabela standard 'CTL', Li-ion 18650) outside the light, or another spare (not included but available separately
- also fits two CR123A if you don't have a (working) rechargeable battery handy
- IPX8 water resistance, ie 2 mins submerged.
Feels very solid, no frills.
That concludes my first impression. Price is a bit hefty at $ 49,95 - let's see if it lives up to that. I think I saw that the spare battery came in at $ 16,95.

-
Coming from Maglights it is a different world out there. I still have 2C and 2AA maglights but they're not used. Once I stepped into the LED offerings from other makers maglight was but a memory. Have fun playing with your new light.

-
Acebeam Rider Rx

-
@GearedForwards said:
Nice! How is it? I've been looking at it for a while for that fidget feature.Initial impressions are good. I bought it because I have a couple other Acebeam lights that have been good quality. It feels well made. Brightness and tint/temperature feels on par and nice. The “fidget” factor is a nice bolt action. A little stiff at first, but still nice.
-
That light looks really cool. Looks futuristic. I don't know much about these light but I'm off to watch a video. Congrats.
-
I just bought me the Olight Baton 3 Premium Edition in Black whit Charging Case
Im quite impressed whit this tiny thing , it’s more the sice of a Keyring Light, but quite bright, works good, and whit the Charging Case, I don’t have to care about the batterie charging Level, so I could use the highest mode if I would need it:.
Although the Charging Case was more meant to get put In a Backpack or something, its fits In my Pyra Pocket of the Work Pants, so this is also a good point ^^ and if I would have to be more casual, It’s also usable whitout the Charging Case, 500 mah for the Flashlight and 3500 mah for the Case should last a few hours..

-
This one is a bit of custom, but it's basically a Malkoff Devices M91BN drop-in with a MD3 body.
It's not a pocket-able EDC light by any means, but it fills just about every role I need a light for, with many cell options in a "bomb-proof" package.


-
Looks good Terry.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login