Wenger Minigrip Mod
-
I have a used Wenger Minigrip. The pliers didn't quite shut when locked and in trying to remedy this I snapped the pin embedded in the pliers handle which the lock catches on to. I have the pliers closed with a cable tie at present, but it's taken the glamour out of the tool for me now.
As I see it my options are to try to fix the pliers, to leave it as it is, or to take it apart and remake it without the plier function. I'm quite enamoured with the idea of the Blade, wood saw, metal file, cap lifter and can opener combo.
I've never modded a knife before and don't have any speSmurfpillst tools, but I consider myself to be a practical person (despite knackering the minigrip!)
Would this be a straight forward repair or mod?
I've looked at the mod stickies but they only seem to refer to Vics - Has anyone got a link to modding Wengers?
Cheers, Magentus
-
Well, I've never had a Wenger or a Vic apart myself, but hopefully someone will be along shortly who can help. :)
-
Have you inquired about getting it repaired under warranty?
-
I have modded a few Wengers but I never had a minigrip so i don't know how it looks "naked" and on which pin the handle rides/pivots. (that's the one that broke, right-I just skimed through your other thread) could you post some pics of it without the scales and the problem area?
-
Howdy all,
I've modded a few Wenger's but I generally prefer not to. Here are a couple of pics showing a Wenger and a Vic with scales off. The Victorinox is much easier to put back together if you where carefull to save the bushings when you took it apart. The Wenger's are a litttle tougher to get the tightness just right (imo). If you are going to use factory scales once it is modded be sure to stay clear of the raised clips on the liner. A tip for anyone who is making custom scales for Wenger's, Since you will need to epoxy them on any way either cut off the tabs from the liner or while the knife is disassembled (if you are changing tools while modding) flatten them into the liner on a flat before reassembly. Also be carefull the epoxy will go right through the holes in the liner and onto the blades and the liner. Then it becomes a wenger fishing weight.

-
Then it becomes a wenger fishing weight.

Thanks for the advice people. Seeing as I made such a snafu with this originally and the Wenger contact I have here in the UK seems very approachable I may try the warranty idea first. Left to my own devices I will end up with the fishing weight!
-
Is the pin that sheared, just a plain round pin pressed into the jaw? Maybe it could be drilled out and another pin pressed or hammered in?
-
The problem is the amount of clearance needed to get a drill in properly. I've looked and there doesn't seem to be enough room.
I think I'm going to take the cowards way out and go begging to Wenger with my tail between my legs.
That'll teach me to meddle with things.
-
It's always better to use the warranty while you can rather than fubar it beyond all free repair.

-
One interesting option would be to remove the plier heads completely and add a few short tools in its place - perhaps a snap shackle, phillips screwdriver, and/or victorinox magnifier, and retain the awesome 1/4" bit driver storage and functionality.
I did the same thing trying to get my minigrip to close all the way, except I broke the handle instead of the pin. It was a cheap beat-up one and I already have two pristine (one needle one blunt) tools, so I didn't care to have it repaired. Note that the other two minigrips I have close perfectly and cut wire perfectly, but obviously there were some duds from the factory.
Charles.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login