Multitool for Car?
-
I'd say the Powerlock. I used mine to crack a corroded, rusty, stripped, and deformed battery terminal nut with mine. I doubt any other pliers short of a Vise Grip would have done that. Speaking of witch, I'd carry a few dedicated tools in your car also if I were you...a toolbox in your trunk is nice to have with some dedicated drivers, Vise Grips, cable ties, duct tape, a socket set, etc...
A multi is something handy to have in the center console/arm rest/glove box instead of going to the trunk and digging through tools.
I'd check ebay for a Powerlock, I'm sure you can get one for under $50 there...
-
@Corrugated said:
I'd say the Powerlock. I used mine to crack a corroded, rusty, stripped, and deformed battery terminal nut with mine. I doubt any other pliers short of a Vise Grip would have done that.I agree with getting a Powerlock. I've used both a Gerber and a Leatherman on my car recently and neither had the power to remove rusted bolts.
-
@Corrugated said:
I'd say the Powerlock. I used mine to crack a corroded, rusty, stripped, and deformed battery terminal nut with mine. I doubt any other pliers short of a Vise Grip would have done that. Speaking of witch, I'd carry a few dedicated tools in your car also if I were you...a toolbox in your trunk is nice to have with some dedicated drivers, Vise Grips, cable ties, duct tape, a socket set, etc...Thanks for the recommendation, Corrugated.
I already have an old toolbox in the trunk with most of what you suggest.
Also in the trunk: plastic tarp for emergency shelter, old sleeping bag, basic cold weather clothes, PVC rain suit, old work boots, folding shovel, ax, lights, water, a little food, basic first aid supplies, etc. The Boy Scouts taught me to always "Be prepared."
@Corrugated said:
A multi is something handy to have in the center console/arm rest/glove box instead of going to the trunk and digging through tools.That's where I keep mine.
@Corrugated said:
I'd check ebay for a Powerlock, I'm sure you can get one for under $50 there...If I decide to go with a Powerlock, I'll check eBay. But, just grabbing a Powerlock when I'm at Lowes seems like a better move. Saving a few bucks by ordering off eBay just isn't worth the hassle for me. Generally, I'll be at the local Lowes weekly to get something for the house or yard.
.
-
Victorinox SwissTool (70 bucks plus shipping)
Where are you shopping? :P
Def
-
Victorinox SwissTool (70 bucks plus shipping)
Where are you shopping? :P
Def
Thanks for the pointer - that's a very good price.
Nowhere in particular. I'd seen the SwissTool listed somewhere at that price and it stuck in my mind.
Probably saw that price at REI, which always has a decent selection of outdoors stuff, but at higher prices than most other online stores.
Recall seeing the Swisstool somewhere else for even more - 75 bucks IIRC.
.
-
Compound leverage of SOG tools is greatly misunderstood. There are a few things you should consider when thinking about a SOG or Paladin tool, otherwise you may be disappointed. The compound leverage only means that closing pressure is multiplied when closing the tool, which means that anything you are trying to grip gets gripped twice as hard. This won't help on a rusted or corroded bolt. About the only thing it will help you with is crushing through some of the surface rust/corrosion, but for threads that are rotted in, compound leverage will not help you one bit. Also, that extra closing power has to come from somewhere- in this case, the extra power comes from the handles. They have to be opened significantly wider than a regular multitool or pliers to grip the same sized item. There's a good picture of this in 665ae's bike thread here:
/topic/1769
I am certainly not saying anything bad about SOG and Paladin's compound leverage tools, but like anything else, know what you are in for or you may find yourself disappointed.
As for what tool I would choose for an in car backup- probably go BIG since I don;t have to carry it and automobile parts aren't usually considered dainty. Powerlock, SwissTool, Surge, Core, SuperTool, SwissGrip- any of these heavy duty tools will look after you in a pinch.
Def
-
Lessons learned:
-
Have a multitool on hand or somewhere in the passenger compartment. On three occasions when I used mine to get back on the road, my tool kit in the trunk was either inaccessible (lock frozen) or inconvenient (under a load of luggage during severe weather).
-
Get whatever multitool you like. Finesse the debate over compound leverage by also keeping handy a small adjustable wrench. Unless the bad guys are closing in on you and there is no other getaway option, you are much better off turning a nut by wrench than pliers. I store in my glove box a Leatherman Super Tool, Mini-Maglite and 6 inch adjustable wrench in a Nite Ize pouch. These, a small tool kit in the trunk, duct tape and a can of WD 40 are all I carry for unexpected mechanicals. Whatever they can't fix, a call to AAA and a credit card, can.
-
-
Good points. A small tool kit with a few dedicated tools, plus a good multi to fill in the gaps is probably the best way to deal with most problems.
Def
-
@Defender said:
Compound leverage of SOG tools is greatly misunderstood...They have to be opened significantly wider than a regular multitool or pliers to grip the same sized item. There's a good picture of this in 665ae's bike thread here:/topic/1769
I am certainly not saying anything bad about SOG and Paladin's compound leverage tools, but like anything else, know what you are in for or you may find yourself disappointed.
Very instructive thread on assembling a bike with a SOG multi.
I've encountered this issue before with compound leverage pliers. Most of them trade off some gripping diameter capability for greater gripping strength.
Breaking loose a stuborn nut can require a lot of torque. That requires plier jaws that can grip the nut tightly without slipping, to allow applying that torque with the plier handles.
In my experience, compound leverage pliers may be helpful in gripping a nut tightly enough to avoid slippage when torque is applied to the handles.
@Defender said:
As for what tool I would choose for an in car backup- probably go BIG since I don;t have to carry it and automobile parts aren't usually considered dainty. Powerlock, SwissTool, Surge, Core, SuperTool, SwissGrip- any of these heavy duty tools will look after you in a pinch.Def
Thanks for the advice. Yeah, I do want something heavy and beefy enough to survive abuse.
I'm still actively considering both Powerlock and SwissTool, along with Diesel and MP600 Bluntnose.
.
-
Yeah, but a decent adjustable wrench will work even better!
Def
-
Autotool? ;) :D
-
@Defender said:
Yeah, but a decent adjustable wrench will work even better!Def
So will a decent knife, a decent set of screwdrivers, a decent scissors, a decent file, a decent saw, and even a decent set of pliers.
Multitools deliver a second-rate performance at nearly every function they provide. But, even a second-rate performance is often "good enough" for the task at hand.
.
-
I don't want to cause any thread drift,but am I alone in seeing more people travelling without even a basic tool kit in their vehicles?
-
@Bison56 said:
I don't want to cause any thread drift,but am I alone in seeing more people travelling without even a basic tool kit in their vehicles?They figure they can use YOUR tools

The trunk of my Caddy looks like the trunk of a 4X4...tool box, tool bag, 3 jacks, flashlights, etc...you'd never tell from the outside!
-
I would have thought that since you drive a Caddy you'd have a half dozen mechanics following you, ready to react to the slightest problem!
Def
-
@Defender said:
I would have thought that since you drive a Caddy you'd have a half dozen mechanics following you, ready to react to the slightest problem!Def
I'd need a half dozen mechanics alright...NASA mechanics! I'll NEVER buy a car with a cumputer running everything...I wish I had my 1989 Oldsmobile Delta 88 most of the time :'(
-
I remember my first car with a computer... '87 Firebird... I replaced the engine with an identical one and it was apparently not on speaking terms with the computer because it wouldn't run.
Needless complications....
Auto repair multitools in the future will look like a Palm Pilot with some fold out blades so you can diagnose the problem, then cut open the packaging on the replacement chip!
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login