Knifeless Bond?
-
@Demel said:
Seriously Leatherman. What the hell?!? The screws literally pushing the internal tools making them unusable. Plus they are already tight. The pliers are the most functional but not off to a great start. On the positive side, the spring lock does feel very secure. Just have to get the damn tools out first
Sent from my Pixel 6 using Tapatalk
There's two different clips, it looks like you have the one with hardware too long for the bond

-
I bet that is the clip for the Free K series
They have longer screws to account for the thicker scales on the K2 and K4 
-

Mods....just delete this thread
-
:D
It may help others

Leatherman doesn't really differentiate the 2 clips enough and even when asked questions about them, some of the employees even don't know the difference

-
It may help others

Leatherman doesn't really differentiate the 2 clips enough and even when asked questions about them, some of the employees even don't know the difference

Hopefully. I'll give them a call today. Maybe the only difference is the screws you get. If that's the case why not put both sets in the package. You can make a selection on their website direct but it doesn't say or show what's different.
https://www.leatherman.com/lanyard-ring-pocket-clip-free-bond-623.htmlAgain, I'll call today and hopefully get some type of solution
Sent from my Pixel 6 using Tapatalk
-
@Demel said:
Hopefully. I'll give them a call today. Maybe the only difference is the screws you get. If that's the case why not put both sets in the package. You can make a selection on their website direct but it doesn't say or show what's different.
https://www.leatherman.com/lanyard-ring-pocket-clip-free-bond-623.htmlAgain, I'll call today and hopefully get some type of solution
Sent from my Pixel 6 using Tapatalk
I think that the K series clip also has an extra bend, as you have pictured above
I hope you can get some good answers from them 
-
For anyone else reading this/future reference, although easily "fixable" by grinding the protruding thread portion.
[attach id=0 msg=2338318]

-
Pictures when finished!

I did add the package opener from the W/S/R series to my knifeless Rebar; it did required for me to modify the nail nick a bit (so that the tool closes completely with parallel handles) and to touch up the inner lip of the lock stop ( but since the Bond has no lock, I'd guess it's not needed). Can take a picture if needed.
Edit- almost forgot; also had to make a "divot" where it rests on the lock tab pivot.
-
Can't wait to see the pics, Juan

-
This is a true Knifeless Rebar (but it's almost the exact same chassis/handle as the Bond's so, ought to work...) to which I replaced the large washer/spacer found next to the inner handle, for a Rev package opener. I traced the divot from the file, marked the area which was above the handle, and went to work with my Dremel 395. Then touched up the nail nick, added a drop of blue Loktite and reassemble. [attach id=0 msg=2338478] [attach id=1 msg=2338478] [attach id=2 msg=2338478]



-
Because I now work full time in a hospital (this the reason for me not participating in challenges now
), these has become my main EDC, which has worked very well opening packages, bags or boxes; adjusting wheelchairs, assembling and/or adapting equipment. My substitute kit consists of my Bladeless MP AND, a Leatherman Removable Bit Driver Kit with assorted blades. -
That is a nice and very well thought out mod

Great pics as well 8)

-
@Juan el Boricua said:
Because I now work full time in a hospital (this the reason for me not participating in challenges now
), these has become my main EDC, which has worked very well opening packages, bags or boxes; adjusting wheelchairs, assembling and/or adapting equipment. My substitute kit consists of my Bladeless MP AND, a Leatherman Removable Bit Driver Kit with assorted blades.Really nice. Does the hospital you work at have a knifeless policy? I worked in electrical construction and I always had a knife on me, even in hospitals. Either way it's a great set up. Unfortunately there aren't many good options for bladeless multi tools.
Sent from my Pixel 6 using Tapatalk
-
Thanks Poncho, Demel.

Yes, I'm an occupational therapist at a rehab. hospital fulltime now, and it does has a no-knife (guns, weapons, etc.) policy implemented. My way around it when I'll need a knife blade is to bring the MP, to which I adapted a plain and a serrated blades to work with the exchanger and store them in a separate pouch.
Sadly you're right for full size tools, as only the Rebar and MP600 are like that; Powerlocks can be easily customized, only requiring the buying of the alternate tool (scissors, v-cutter, wire gauge/stripper, socket adapter). Or, customized an existing tools.

I'd guess that there isn't much of a market for them, other that hospital/school/federal employees who work outside the maintenance department.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login