GOAT Tools
-
A closeup view of the bit holder shows it can hold a double-ended bit. If you freeze-frame the vid toward the start as the tool is flipped over, you will see a larger phillips bit in the holder and a smaller phillips seen through the arrow-shaped hole in the bit holder on the opposite end. Good feature.
They have also added an S35VN main blade as an option. A great top-end stainless steel. You won't find this on any other MT.
This tool is looking like it has many many features we have been asking for and things like custom scales which we never asked for because we didn't think it was feasible.
I can hardly wait for a full review by an end-user.
-
@carl said:
A closeup view of the bit holder shows it can hold a double-ended bit. If you freeze-frame the vid toward the start as the tool is flipped over, you will see a larger phillips bit in the holder and a smaller phillips seen through the arrow-shaped hole in the bit holder on the opposite end. Good feature.I was wondering if someone was going to notice that π I was testing a Wiha bit after someone asked if they fit. #1 & #2 Phillips confirmed, can't gaurantee every double ended bit will fit.
Leatherman bits also fit. I specifically designed a deeper center slot for those.
-
@carl said:
Here is the latest video showing off their new titanium scales with laser-cut logo and hobby blade with replaceable blade, So nice!!!!Note: The video thumbnail also shows their beautiful and interchangeable brass scales! Awesome!
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. AuΓerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
That is really neat, there is nothing comparable out there. Gotta watch the rest of the videos :popcorn:
-
GOAT coming on strong. -
A closer look at the Facebook still photo of the 2 tools (brass and titanium-scaled tools standing on-end with open hobby blade) shows there are several differences between the 2 tools:
- The locking feature for the implements are significantly shorter (lengthwise) on the brass-scaled tool when compared to the titanium-scaled tool. This is visible at the midline of each tool toward the top (side opposite the plier end).
- The thumb hole is larger on the black hobby blade when compared to the bare-stainless version.
- The necked-down portion is longer on the black hobby blade when compared to the bare-stainless version.
The 2 different lengths for the locking feature are very interesting. I assume the length determines the pressure placed on the implements (longer = less pressure, shorter = more pressure).
This shows the various designs the Goat Team are considering at the moment.
-
Very keen eye!
Although we are using a variety of designs that survived testing for product photos, the multitool design has been finalized.
-
Correct! The sand blasted with brass scales is an older design handle. The locking leaf spring was too tight, causing pieces to be difficult to open, and even more difficult to unlock using the remaining tools to disengage.
-
Thumb hole is actually the same size! However the black one has a beveled edge. We removed the bevel because it was difficult to get a good purchase & open the outer tools.
-
The longer neck of the black oxide hobby blade holder was a multi part solution to keeping the blade compression plate on the tool while replacing blades.
That's just the improvements you saw in 1 photo, imagine how many more there have been! :D
-
-
Latest GOAT video: A closer look at the bit driver using commonly available bit types (full-size, flat, double-ended, single-ended, extended, etc.) and its centered position within the multitool for best ergonomics.
This addresses the problem of off-center bit drivers seen on most other brands of multitools and are clumsy to use so I'm glad to see GOAT has listened to us and fixed this issue.
Also, no more proprietary bits! We can now use more bit brands which we already have in our tool collection. Nice!
.
The versatility and positioning of this bit driver is a great design and comes with their basic package.The bit driver is 8mm thick so it takes up the space of four regular-thickness 2mm implements (all implements - whether short and long - are 2mm thick).
The total space available on each side of the multitool is 12mm.The thumbnail of the video below shows the multitool with the optional titanium scales. Looks great!
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. AuΓerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
The torsional (twisting) forces generated (in the multitool handle) while using the bit driver are 'channeled' through the slimmed-down thumb cutout portion of the handle which contains the bit driver.
Question: Will this result in excess flexing of the multitool handle while tightening down a screw?
The same rationale would apply to the multitool handle which contains the large flat blade screwdriver.This may be a good practical reason to attach the optional titanium scales for added rigidity and strength.
-
Interesting take... the twist would be counteracted somehow by the pivot heads not allowing too much axial give, but whether that's enough?

-
I'm assuming any add-on which can counteract the flex in the twisting direction needs to be fixed at both ends of the multitool - such as the scales which are fixed at both ends by the pivot screws.
That said, a multitool is only meant to do light duty so if a lot of force is required for a particular job, its time to use a dedicated tool; e.g. a full-size screwdriver.
-
Latest Schedule Update: The completion of the initial 200 multitool units are scheduled to be finished by the end of July 2022.
If all looks good with these 200 units, they will be the first ones sent out to the early adopters.
We're getting close people!
Finally, a multitool where the user doesn't need to worry about bending or breaking an implement, which can be easily and cheaply replaced.
-
Indeed. Can't wait to get my grubby fingers on one

-
@carl said:
The torsional (twisting) forces generated (in the multitool handle) while using the bit driver are 'channeled' through the slimmed-down thumb cutout portion of the handle which contains the bit driver.Question: Will this result in excess flexing of the multitool handle while tightening down a screw?
The same rationale would apply to the multitool handle which contains the large flat blade screwdriver.This may be a good practical reason to attach the optional titanium scales for added rigidity and strength.
@Dutch_Tooler said:
Interesting take... the twist would be counteracted somehow by the pivot heads not allowing too much axial give, but whether that's enough?
Just threw one of the multi-tools in a vice with a 1/4" hex in the bit driver. Connected a 1/4" socket to my torque wrench, started wrenching, and it easily got over 80in/lbs. The handle holding the bit twists slightly, but goes right back to where it was. Out of curiosity, I did the same test with my old Wave and it acted the same.
-
Here is the latest GOAT video showing the sheath in vertical and horizontal carry positions:
https://www.youtube.com/watch?v=_o2nPgv4URs -
@GOAT Tools said:
Just threw one of the multi-tools in a vice with a 1/4" hex in the bit driver. Connected a 1/4" socket to my torque wrench, started wrenching, and it easily got over 80in/lbs. The handle holding the bit twists slightly, but goes right back to where it was. Out of curiosity, I did the same test with my old Wave and it acted the same.Good enough. Are you one of the engineers of the GOAT Tool?
If so, do you have any updates? -
The GOAT Tools website is in the beginning stages, showing some prices and tool blank/handle scale templates:
-
If those prices are for real...Leatherman, Gerber, and Sog are all in Big Trouble. It all rests on GOAT to deliver on a quality product. If they do, this is going to be a major shakeup in the market. Also did anyone else notice the 100 year warranty??
-
Looks cool. What are the dimensions on this thing?
-
Those prices are for the different tools you can ad, not for the complete multitool I thinkβ¦β¦
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better π
Register Login