Gerber Armbar Owners Club
-
Good to know. Thanks.
-
Got a Armbar few days ago.
Good blade. Mine came very, very sharp. I found the format of the blade very good. Liked it very much.
No spring snap. None. Zero.
But at this point I had no problem with It, since I used the Armbar to remove some bolts in a very dificult and anoying place and It was made easier by the way that the tool work. If I had a screwdriver with the same lenght of the Armbar It would be more dificult.The scissors are not so good. The ones on my MP400 are better. But It cut everything that I needed without any problem and with perfection.
The bottle opener opened my beer. No complaints.
I'll keep carrying It. [emoji6]

-
I picked up another Armbar during Gerber's 30% off sale. The Armbar Cork will replace the SAK that's with my camping stuff. Overall, it's nicer than the SAK, but the most important part is that it has a lever with the corkscrew.


-
A cracking pic there Rich.

-
Does anyone know how to loosen up the blade on the Armbar? I got one that was extremely stiff out of the package. I tried using pliers to loosen it but that still did not work. Help please. This pivot is not giving. I actually really like the tool set. But I don't carry it because of the blade.


Sent from my Pixel 6 using Tapatalk
-
You could try WD40 or something similar while moving the blade. Be careful with the cutting edge!
If that won't loosen it you could always open the pivot screw. If the armbar is setup like the MP's, you could adjust it that way. It should be set with loc-tite though. So you would have to remove it and apply new loc-tite to prevent it from coming loose. This will of course void the warranty.
I am only speaking with experience from modding the MP's, i have not actually modded the Armbar.
-
@Demel said:
Does anyone know how to loosen up the blade on the Armbar? I got one that was extremely stiff out of the package. I tried using pliers to loosen it but that still did not work. Help please. This pivot is not giving. I actually really like the tool set. But I don't carry it because of the blade.

Sent from my Pixel 6 using Tapatalk
Quite literally 2 months of fidgeting with it... opening and closing it while surfing the internet, and watching movies, and other mindless things.. a good 50 hours of wearing it in, if not more. The moment it opened smoothly, it was all worthwhile.
-
@ElevenBlade said:
Quite literally 2 months of fidgeting with it... opening and closing it while surfing the internet, and watching movies, and other mindless things.. a good 50 hours of wearing it in, if not more. The moment it opened smoothly, it was all worthwhile.Thanks. I did loosen up the pivot with some knipex pliers. It was extremely tight. The action isn't glassy smooth but it is usable now. Thanks for the feedback
Sent from my Pixel 6 using Tapatalk
-
@Demel said:
Thanks. I did loosen up the pivot with some knipex pliers. It was extremely tight. The action isn't glassy smooth but it is usable now. Thanks for the feedbackSent from my Pixel 6 using Tapatalk
I started to loosen the pivot with pliers and then I decided against it because of the amount of force I was needing.... didnt feel right. Glad I didnt. if I had loosened the pivot then, it would have blade play by now. It will never be glassy smooth. Just deliberately but easily openable with one hand.
The other issue is the liner lock, I find that I have to press in very close to the contact patch at the interface to get it to unlock. That part seems to wear in a bit too, and now I don't have to be so precise with where I press to disengage the lock. (hence the reason I'm glad I didnt loosen the pivot myself)
In both instances, there was one noticeable point in time where the action worked well. There was one point in time when the blade opened smoothly and it's been that way ever since.... and there was one point in time where the lock suddenly disenged smoothly. As if the interfaces had been slightly off, and then some tiny fragment of metal broke away and the interfaces settled together just right.
-
I wanted to thank you guys for your insight on the Armbar. I was considering one of these but the qc issues are too apparent so it's a no go.
-
@ToolJoe said:
I wanted to thank you guys for your insight on the Armbar. I was considering one of these but the qc issues are too apparent so it's a no go.I have an Armbar Drive and was using it today to assist replacing a door latch on the front of our house. It was a complete failure! I have used the knife and scissors on this tool, and they work great, but the drive kept folding in on me and I just had to put it aside and just use another tool. There is no excuse these days for not making locking tools on these things. The driver does not even snap into place at all. I have a few off-name brand tools like this that I got off Amazon that are superior to the Armbar in almost every way and they have all locking tools. I still like the tool but will not be using the driver (or awl) on it.
-
The Armbar is great as a backup, used with other multitools. The scissors needed sharpening, and I bent the spring until it could barely be reassembled. Things stay in place much better. Since I have a knife on the multitool, and some don't have saws, a modded reciprocating saw blade was made to fit in that slot. Works okay on small limbs and PVC. [attach id=0 msg=2374454]

-
Nice!
Welcome to

-
Nice one, and welcome to the forum! -
Two new models.
-
Very cool!
Def
-
Pocket clips!
-
Looking forward to see these in action. The original generation of armbars were solid in concept, iffy in execution. Some improvements to fit and finish, etc. and these could be great.
-
Very nice!
-
Joining this club because of the orange challenge :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login