Thread chaser for pivot posts
-
Hi here is my first contribution. I'm new to modding and I may have solved a nonexistent problem, but in case this interests anyone... I wanted to clean the gunky Loctite out of pivot post threads, so I created a tiny thread chaser. I discovered that the threads are #6–40 (at least on the wave, rebar, and wingman). So I got the right bolt and filed a couple of slightly diagonal notches along it (I could have used a tap, but I didn't want to risk removing any metal).

-
Here is the thread chaser in use.

-
Here is the crud that came out of the threads.

-
. Good idea. Why not start with clean threads
. -
I think if you softened up the Loctite with some solvent first you would get more stuff out, but I haven’t tried that yet.
-
Always a good idea to clean things as much as you can
Nice idea and pics

-
Great idea, and thank you for the pictures and explanation!

-
Finding that bolt was probably the hardest part. Never thought about doing it that way but it’s a great idea

-
@tattoosteve99 said:
Finding that bolt was probably the hardest part. Never thought about doing it that way but it’s a great idea
Yeah actually even specialized bolt vendors and Grainger didn't have it, I did find VERY few choices on Amazon and bought this one:
https://www.amazon.com/gp/product/B07BYWCQN1/ -
Honestly, it's easier and probably just fine to carefully use a tap. But with my little gizmo I'm assured of not damaging the threads.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login