The Hacked Leatherman Owners Club.
-
Great job, Davis

My bit driver sticks up just a bit because I wanted the scissors in them. I tried to cut a small section out of the bit driver in my first one but didn't bother on the second one and it actually makes the bit driver more accessible

-
Already used it a ton today and I like the tool set as is - the opener was used to unpack a tricycle for the toddler. The thing was in more pieces that I imagined and each one was packed separately in plastic :o so it had a workout. The screwdriver was used a lot during assembly. No pictures as I got a bit frustrated with the work, sometimes I can swear that the producers of such things intentionally make the instructions vague or plain incorrect. And you DO need instructions, some of those things are pretty complicated.
Later I finally got to patch the front tire of my bicycle and took it around the block for a quick ride. Used the screwdriver on the new tool to adjust the brakes.
So far so good
-
Glad it has seen some great usage already

My 2 favorite things of mine really is the screwdriver and the blade, so you have the best things (in my view) left in

-

I made this for my former apprentice and friend. He is 32 years my junior, but we get along very well. He has talked me into going to a concert with him, and he is buying the tickets. This is how I am paying him back.
I asked him what he thought would make a near perfect MT for an electrician. I used his comments as a guide, but also included a couple of things that I knew would be useful. Personally, I would replace the serrated blade/flat head screwdriver with the driver from a Center Drive, but I neither had one nor wanted to buy one in order to rob the driver.
He thinks it looks great, but I don't think he suspects I am giving it to him :D
-
Nice!

-
Very nice! I am sure he will love it when you give it to him
Nice gesture 
What concert you going to
don't get into any trouble :D -
I made this for my former apprentice and friend. He is 32 years my junior, but we get along very well. He has talked me into going to a concert with him, and he is buying the tickets. This is how I am paying him back.
I asked him what he thought would make a near perfect MT for an electrician. I used his comments as a guide, but also included a couple of things that I knew would be useful. Personally, I would replace the serrated blade/flat head screwdriver with the driver from a Center Drive, but I neither had one nor wanted to buy one in order to rob the driver.
He thinks it looks great, but I don't think he suspects I am giving it to him :D
Lucky guy. Hope both of you enjoy the Concert.
-
Thanks guys

@Poncho65 said:
What concert you going to
don't get into any trouble :DWe are going to see Greta Van Fleet. My young friend is a big 70s classic rock fan (as am I), and Greta Van Fleet is a band that became know while he was in high school and is very much influenced by classic rock.
I have reminded him several times that my party days are well in the past. I'll have a beer every once in awhile, but that is as wild as I get. I'll have a tough enough time staying awake for the whole concert. 9 - 9:30 is when I typically go to bed.
The band will be in our area in October, so it will be some months before it happens.
-
I made this for my former apprentice and friend. He is 32 years my junior, but we get along very well. He has talked me into going to a concert with him, and he is buying the tickets. This is how I am paying him back.
I asked him what he thought would make a near perfect MT for an electrician. I used his comments as a guide, but also included a couple of things that I knew would be useful. Personally, I would replace the serrated blade/flat head screwdriver with the driver from a Center Drive, but I neither had one nor wanted to buy one in order to rob the driver.
He thinks it looks great, but I don't think he suspects I am giving it to him :D
I made a few changes. I was able to buy a Center Drive cheap enough to strip for parts, so I took the bit driver and the prybar and put them in the Surge.




-
That is a beautiful mod

-
Thanks buddy

-
That is not a hacked Leatherman, that is an entirely reinvented Leatherman Surge.

-
Thanks guys

I have to admit, there is a part of me that wants to keep it >:D
But yes, I am going to give it to him today. -
I have to admit, there is a part of me that wants to keep it >:D
But yes, I am going to give it to him today.For the black blade and saw, did you acid etch the stainless ones or you bought the black version? The blacks are so consistent with the rest of the BO tools. Looks just like it came from the factory.

-
@Sam Lim said:
For the black blade and saw, did you acid etch the stainless ones or you bought the black version? The blacks are so consistent with the rest of the BO tools. Looks just like it came from the factory.
I used stainless steel blackener for the finish. The Surge was already BO, but much of the finish had worn off. So, I used the blackener on the handles, plier head, and all of the tools. That is why the finish looks fairly consistent.
-
@Adam5 said:
I used stainless steel blackener for the finish. The Surge was already BO, but much of the finish had worn off. So, I used the blackener on the handles, plier head, and all of the tools. That is why the finish looks fairly consistent.Thanks buddy. U did a great job there. I have to look into the stainless steel blackener stuff.

-
Thanks Sam

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
