Black Fire multitool
-
Very cool, Sam! Looks to be ones of the better new platforms. :)
-

It is so nice to see such quality in this. Absolutely wonderful.
Thanks, Sam!
-
Sam, thank you for the details and a through review, I wonder where this is made and whether it could be purchased from the origin.

-
Got mine in yesterday! I will not bore all of you and take a picture of it. We all know what it looks like now, and I could not top Sam's photos anyway! First impressions are very good, but not quite as good as the last tool I got, the Bibury. First of all, I love the feel and weight of it. It really does give you confidence in hand. The knife is razor sharp, tools open up pretty smoothly and snap open, but not real tight. More about that in a bit. The pliers looks strong but are not spring loaded. That actually does not bother me as I read several years ago that the internal spring in some of these multitool pliers weakens them. Not sure if that is true or not, but would make some sense as they would be hollow. Now for the bit driver. It looks and feels very robust. The bits that come with it are very well made. I think this tool would handle screw driving tasks a lot of other multitools would not. The only issue I have with it is the adapter that the bits slide into. if you lose this, it makes the driver useless. I would have preferred a more standard 1/4 driver. The other thing is the Robertson driver. Wut the heck??
I cannot say I own any device that has those type of screws. The other bad thing I would say about it is, with all of the inexpensive tools out there these days with locking components, I do not see why this tool did not have them. Only the blade locks. It obviously does not cost any more money to make them this way. I paid over $50.00 for this tool including shipping. is it worth that? Sorry, but will have to say no. A better price would hav ebeen aorund $25.00. However, I am still glad I got it as it is a unique design, and that is one of the things I look for when I add one of these things to my collection! So I like it a lot, but do not love it, if that makes any sense! 
-
so sad to see this discontinued...
-
@gerleatherberman said:
Looks awesome, Sam! But, $50 is into big-brand territory. So, like you, I would need to see some reviews and what-not to know whether it is worth it or not.
The way the handles are configured, it looks very uncomfortable to use. And the implements(knife only locks) don't lock open. And at $50, that is expected these days.I feel quite the opposite... unless there is a big brand behind it, then there is a lot higher costs in a new tool.
A new tool that is cheap is a strong indication that they cut corners somewhere
-
@Etherealicer said:
I feel quite the opposite... unless there is a big brand behind it, then there is a lot higher costs in a new tool.A new tool that is cheap is a strong indication that they cut corners somewhere
As I understand, Black Fire is a subsidary of Klein Tools, and some of the designs are literally rebadged Klein Tools electrician's gear--like the jab saw advertised as a "outdoor folding saw" and the duct knife they are trying to market as an outdoor knife.
-
@cody6268 said:
As I understand, Black Fire is a subsidary of Klein Tools, and some of the designs are literally rebadged Klein Tools electrician's gear--like the jab saw advertised as a "outdoor folding saw" and the duct knife they are trying to market as an outdoor knife.Almost. The saw has the same handle but a different saw blade. Probably because the drywall saw blade is purposely pointy on the end.
I haven't looked closely at the pocket knife (not the duct knife), but it is probably a rebadged Klein knife also.
-
@Adam5 said:
Almost. The saw has the same handle but a different saw blade. Probably because the drywall saw blade is purposely pointy on the end.I haven't looked closely at the pocket knife (not the duct knife), but it is probably a rebadged Klein knife also.
Yeah, the pocket knife is a rebadged Klein 44223.
-
I didn't know they had been discontinued. I must have snatched mine up right at the end because I got one on Amazon in March for $29.25
I really like it. I have only carried it for 3 or 4 days, but I didn't buy it thinking that it would replace my Signal.
-I LOVE the bit driver, and the offset cutters.
-I Like the liner locking blade, one hand opening blade, and the monstrous pliers.
-I wish the plastic scales were g10.
-I hate that the file is so cheap and bad. I don't mind the slightly smaller size, but it doesn't lock, it doesn't have the edge teeth, & it doesn't feel like "file metal".
(the other two tools are meh)I doubt I will ever get around to it, but If you replaced the scales with G10, replaced the file with a Crunch file, and replaced the other two tools with something... I would carry this tool a few days a week. It's surprisingly solid for <$30.


-
@cody6268 said:
As I understand, Black Fire is a subsidary of Klein Tools, and some of the designs are literally rebadged Klein Tools electrician's gear--like the jab saw advertised as a "outdoor folding saw" and the duct knife they are trying to market as an outdoor knife.Yeah, and it appears that Klein stands behind the brand, as the Klein name is in the logo of Black Fire. That is overall a good sign. Often subsidiary are a quick way to make a buck and then when problems arise to be discarded.
-
@Etherealicer said:
I feel quite the opposite... unless there is a big brand behind it, then there is a lot higher costs in a new tool.A new tool that is cheap is a strong indication that they cut corners somewhere
I think I should be more specific.
To me, the last exiting entry in the MT market were the LM Free P2/4. They bring LM Quality with new innovation. And while LM is well positioned in the MT market, they are not a giant. So, quite understandably, the Free series is not cheap and I'm OK with that (took me a while to realize it though :P).
I got to that conclusion when I realized that I don't need a Civivi Elementum, despite it being "good value". Because at the end of the day, the Elementum can't do anything, the knives I already own can't. So, the effective value is very little (unless you simply crave more). Same goes for all those "off-brand entry level MTs". They probably make good gifts (but even then, I probably rather spend the extra money and know what I'm gifting), but to me they add nothing new to the market. -
Where can you get a Wingman for $40? They're $70 everywhere I looked. And it's a crap tool for $70. None of the tools lock and the cutters don't even meet. Not recommended at all. Ozark Trail Multiforce is a far better tool.
Charles.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login