THE Crunch Owners Thread
-
-
@cnlson said:
Vari,
what tool is the bit driver out of and which clip is that?cnlson the clip is from a Kick just as Poncho65 stated.

The bit driver is from a Surge Gen 2(only version I could get). The nail notch flat was ground flat, enlarged the lock slot and profiled the outer pivot area. The part where the locking pliers adjustment screw is, a notch was machined, allowing the handle to close up more. Added a counter-sunk a magnet to keep it closed since removing the phillips screwdriver which was keeping it closed before.
Poncho65I should not take the credit as I did not do the mod (
I watched). I only provided the materials and my friend in the Philippines did the work while visiting him. -
Ok, so a large bit driver from a Surge :o Glad to know that it can be made to fit
Thanks for the confirmation

-
@variable said:
cnlson the clip is from a Kick just as Poncho65 stated.
The bit driver is from a Surge Gen 2(only version I could get). The nail notch flat was ground flat, enlarged the lock slot and profiled the outer pivot area. The part where the locking pliers adjustment screw is, a notch was machined, allowing the handle to close up more. Added a counter-sunk a magnet to keep it closed since removing the phillips screwdriver which was keeping it closed before.
that is more work than i would want to do on my own. if it was a drop in that would be awesome. The clip is an interesting addition tho. I have a kick somewhere. I'll look at the clip on it.
-
Awesome work on the Crunch. I wish it were a drop in as I'd be all over that.
Terrific mod

-
I would be hip for a Crunch Challenge some time, if we could get the critical mass needed for a badge.
-
@powernoodle said:
I would be hip for a Crunch Challenge some time, if we could get the critical mass needed for a badge.There is already a Crunch Badge, 15 and 30 day Challenges available

-
I meant to say that I wanted a 14 day or 16 day Crunch Challenge.

-
It being the first LM with a locking tab type system could be why
just theorizing here and don't know for sure 
-
@Poncho65 said:
It being the first LM with a locking tab type system could be why
just theorizing here and don't know for sure 
That makes sense.

My friend received a Wave/Wave+ Large Bit Driver and it fits much better but you still need to enlarge the locking slot.

He says their is no need to regrind the pivot profile.


This is just for information if any one else want to try.


-
And it is very good info
we have had a few members mod Crunches over the years but not a lot 
Thanks for the pics as well

-
Thank you for that. That seems doable with out a lot of modding. Hmm << looks for spare Wave/Charge bit holder >>
-
I missed it, what $6 tool did that pocket clip come off of?
Also... why the leatherman 2.5D bitdriver? The Crunch already comes with a perfectly suitable 1/4 bit driver that takes standard bits and holders.
Charles.
-
I will say they would rather have the convenience of not having to take the adjustment screw out when wanting to use the 1/4 inch bit driver

Plus having a LM bit kit is much more compact than a set of 1/4 inch bits

-
I can see the convenience perhaps. But a set of bits in a plastic rail takes almost no space. Plus my motorcycles use either metric allen or security torx, the ladder of which I do not believe are available in flat LM bits. (And if they were, the cost would be exorbitant)
Charles.
-
Nope, my older one rides in my work backpack :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



