What did you use your Sak on today?
-
At least you seem ok right now!

-
@alexanderre said:
We’ve moved to a new apartment - smaller, cleaner, it has an air conditioner, it’s closer to a local gym and it’s 3 times cheaper [emoji471]But right after I plugged in our router I’ve discovered a pretty much the same issue we had with a previous place - badly installed Ethernet connector.
For some reason here they use only 4-wired Ethernet cables instead of regular 8-wired cat.5 or cat.6 [emoji2371]

It works fine, but looks weird and from my experience I can tell that this connection can get quite unreliable
Anyway, I used my Spirit X Plus to cut the badly installed plug

Then I used my beloved Spirit X wire stripper [emoji1316]

Sadly I still had to use dedicated crimping pliers, but at least I had some joy with the Spirit [emoji1319]
Excellent usage and glad things are looking up

Stay safe out there

-
Went to the pub with a mate yesterday (Friday) and whilst attempting to hang my jacket I noticed the hook under the bar counter was loose.
Climber's Phillips/Small screwdriver to the rescue


-
New place - new challenges [emoji23]
Today started bright and early - at 6:30 AM to be precise - I woke up to some conversations that seemingly happened right next to our bed in our room [emoji848] After a few moments of careful listening I found a hole in the floor with a piece of a badly cut tube in it and I even could see our neighbor’s place through it. That’s how I could hear their radio or TV loud and clear for the entire night [emoji15]

No action shots, but I used my LM Wave’s saw to trim the excess tube and stuffed a hole with cotton - we’ll see if it’ll work tonight .
Later I’ve found a similar hole in the kitchen. But anyway.
This place may become a tad better for sleeping after I patched that hole, but it totally sucks as a workplace, which is a must for us at the moment. So I’ve found that Jysk has some cool tables at 50% discount, found one I liked and brought it home. Spirit X Plus took care of the rest. And my god I’m grateful for having at - I used quite a few tools during the assembly and the ratchet is absolutely priceless [emoji1316]
Here’s the end result:

Here are some action shots:
Spoiler:






Having assembled the new table I’ve also tightened a chair I’m about to use - it went way too loose for comfort, but I managed this in no time at all


And even cut some tomatoes and mozzarella for dinner [emoji899]

-
New day - new use [emoji1316]

-
Nice-looking tea kettle, too!

-
Possibly the nicest cider I have ever had.
[attach id=0 msg=2352506]
-
The Airbnb we’re staying at has a garage which we’ve been stringing up wet swimsuits and towels in. This morning the door into the garage wouldn’t open, potentially ruining our planned day at the beach! Luckily I had my Swisstool Spirit X on my belt and was able to disassemble the doorknob. Then I used the pliers to actuate the door latch from within, winning us the garage back. I didn’t take any photos during the process but got one afterwards.

-
MB scaled SwissChamp helping with car maintenance:
A drop of oil for weekend dash for the Benz:

And splash of coolant for the Chevy after working hard thru recent heatwave:

Sent from my iPhone using Tapatalk
-
@mansedan said:
The Airbnb we’re staying at has a garage which we’ve been stringing up wet swimsuits and towels in. This morning the door into the garage wouldn’t open, potentially ruining our planned day at the beach! Luckily I had my Swisstool Spirit X on my belt and was able to disassemble the doorknob. Then I used the pliers to actuate the door latch from within, winning us the garage back. I didn’t take any photos during the process but got one afterwards.
Oh now that’s what I call fun [emoji2956] well done mate [emoji1303]
-
Yet another fun day in this apartment [emoji1738]
My wife complained that a door in the kitchen won’t open as it should and poked me how is that even possible I haven’t fixed it yet [emoji23]
I looked it the mechanism with a handle pushed down and the problem was surely there

Well here I was once again with my Spirit X Plus - ratchet proved to be invaluable as usual:

It allows to reach places I won’t be able to get to otherwise

Used pliers to pull a pretty greasy part and keep my fingers clean

Having disassembled the handle the problem was really a tad more serious than I expected - mechanism was a cheap ceramic piece of garbage

Thankfully we love not far from a hardware store so I bought and installed a replacement

Though it seems like a direct replacement I actually had to fiddle with it a little bit: bent with pliers and filed an original part a little to make it a perfect fit with a new part - no problem for a Vic metal file

Being done with that later on that day we invited a speSmurfpillst to fix a fridge we have here - it makes lots of noise every now and then. He came for a second time already while I was not at home, not only did he not fix it again having of course charged us more, but he also wrecked a power outlet I had to fix.
Warning: don’t forget to turn the power off before working with outlets, switches and so on!

Disassembled with a ratchet again

And then for the first time really I used a can opener as a flathead screwdriver on a Spirit X - a perfect fit for this particular job

All done and ready for more [emoji1316]

-
The ratchet really earned its keep. I'm convinced that I must have such a thing someday. Nicely done on the repair work!

-
Our electric kettle stopped working. It wasn't really surprising since it's at least 10 years old and it is a cheapo brand to begin with. But before I go get a new one I wanted to see what's wrong with it. Plus my new Workchamp was itching for something to do. So I took it apart


Those inline Philips are awesome, I found it more comfortable to use than in a plier based MT.

My initial suspect was the switch and particularly the relay that's in it. But testing the circuit with another favorite multi tool of mine I found no fault.

So I decided to take apart the base. And surprise surprise - a Chinese security heads on the bolts. I have seen such bits, I even think I have a few somewhere. But that's the first time I ever encounter such bolt in person :D Thought it would be faster if I just make myself a bit, rather than trying to find one I'm not sure I even have. I could have cut it more carefully and evenly but I needed it for something screwed in plastic so


Then the smaller Philips helped disassemble the connector between the base and the kettle.

And here is what I found, not surprising it stopped working and actually I wondered how it worked so far


Some 1200 sandpaper and it was shining again. Assembled everything back and voila - it's working again

Then I told my wife something like "if this thing breaks 6-7 more times and I repair it with this SAK, it will basically pay for it's self"

-
@DavisNikolov said:
Our electric kettle stopped working. It wasn't really surprising since it's at least 10 years old and it is a cheapo brand to begin with. But before I go get a new one I wanted to see what's wrong with it. Plus my new Workchamp was itching for something to do. So I took it apart

Those inline Philips are awesome, I found it more comfortable to use than in a plier based MT.

My initial suspect was the switch and particularly the relay that's in it. But testing the circuit with another favorite multi tool of mine I found no fault.

So I decided to take apart the base. And surprise surprise - a Chinese security heads on the bolts. I have seen such bits, I even think I have a few somewhere. But that's the first time I ever encounter such bolt in person :D Thought it would be faster if I just make myself a bit, rather than trying to find one I'm not sure I even have. I could have cut it more carefully and evenly but I needed it for something screwed in plastic so


Then the smaller Philips helped disassemble the connector between the base and the kettle.

And here is what I found, not surprising it stopped working and actually I wondered how it worked so far


Some 1200 sandpaper and it was shining again. Assembled everything back and voila - it's working again

Then I told my wife something like "if this thing breaks 6-7 more times and I repair it with this SAK, it will basically pay for it's self"

Excellent SAK use there!
I've heard that the fish hook disgorger tip of the 91mm fish scaler can be used on those two-hole security screw heads, but I haven't run across any to try.
-
@DavisNikolov said:
Our electric kettle stopped working. It wasn't really surprising since it's at least 10 years old and it is a cheapo brand to begin with. But before I go get a new one I wanted to see what's wrong with it. Plus my new Workchamp was itching for something to do. So I took it apart

Those inline Philips are awesome, I found it more comfortable to use than in a plier based MT.

My initial suspect was the switch and particularly the relay that's in it. But testing the circuit with another favorite multi tool of mine I found no fault.

So I decided to take apart the base. And surprise surprise - a Chinese security heads on the bolts. I have seen such bits, I even think I have a few somewhere. But that's the first time I ever encounter such bolt in person :D Thought it would be faster if I just make myself a bit, rather than trying to find one I'm not sure I even have. I could have cut it more carefully and evenly but I needed it for something screwed in plastic so


Then the smaller Philips helped disassemble the connector between the base and the kettle.

And here is what I found, not surprising it stopped working and actually I wondered how it worked so far


Some 1200 sandpaper and it was shining again. Assembled everything back and voila - it's working again

Then I told my wife something like "if this thing breaks 6-7 more times and I repair it with this SAK, it will basically pay for it's self"

Way to go and a pure joy to read [emoji1319]
Those in-line Phillips are amazing on a Work Champ - the best I’ve ever tried on a SAK or any other MT, especially a long slim one [emoji1303]
And true - a return on reasonable SAK investment does come in no time at all (how do you define reasonable though?… [emoji23])
-
Oh dear oh dear, I feel like no handyman or handywoman ever lived in this place before [emoji23]
Came out of the shower and wanted to brush my teeth, turned the water tap towards the sink and the main tube left in my hands [emoji23]

No big deal though - I put it back into place in no time and tightened by hand as much as I could

Then I put some duct tape on the Spirit X pliers to prevent any scratches and tightened it just a little bit more

Done deal, but seriously though - what’s about to break next here? [emoji2359][emoji23]
-
Good job the place has a more than competent handyman in residence now! Fingers crossed for the future, Alexanderre!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login