What Traditional Knife are you toting today?
-
Cheers gents. :D
I have decided that it isn't a "collection" as long as I don't start buying shelf queens. That's my story and I'm sticking to it.

-
Black stallion and a 301
[attach id=0 msg=2354715]

-
Just finished this one today. It's a Boker USA 9361, but it didn't have the nice jigged Delrin scales these usually came with. Instead, it had ugly black plastic scales. Everything else was in good order for a 25-dollar knife, so I took it apart and made some desert ironwood scales for it.
The pile side of the blade isn't marked 9361, which I thought was strange, and there was no Boker shield on the top scale. I hypothesize that these knives were made for government contract fulfillment. So an "engineer's knife" I guess.
Fun project and I learned a ton.
Before:


After:







-
Wow great job, how did you spin the rivets ? Also what are the extra rivets at the ends ?
-
[attach id=0 msg=2354974]

-
@SteveC said:
Wow great job, how did you spin the rivets ? Also what are the extra rivets at the ends ?Thanks Steve. I used an ordinary pin spinner on the rivets. On one of them I pressed too hard on my drill press and it made that countersunk/machined looking impression. I didn’t mind it so I decided to do all six.
The flush pins on the ends are covering up my mistake. When I was forming my scales, I used one of the original liners as a template to mark my holes. Unfortunately I marked and drilled the bolster pin holes instead of the pivot pin holes!
The material is expensive and I had hours into forming them, so I decided to try flush-filling them with brass pins and then finish sanding them with the scales. Next time I’m going to experiment with building the whole knife this way. I think it would look cool, but it would mean doing the final scale finishing after the knife is completely assembled. Have to think some more about this.
-
@Myron said:
Just finished this one today. It's a Boker USA 9361, but it didn't have the nice jigged Delrin scales these usually came with. Instead, it had ugly black plastic scales. Everything else was in good order for a 25-dollar knife, so I took it apart and made some desert ironwood scales for it.The pile side of the blade isn't marked 9361, which I thought was strange, and there was no Boker shield on the top scale. I hypothesize that these knives were made for government contract fulfillment. So an "engineer's knife" I guess.
Fun project and I learned a ton.
Before:


After:







Well, that's just fantastic Myron.

-
@Myron said:
Thanks Steve. I used an ordinary pin spinner on the rivets. On one of them I pressed too hard on my drill press and it made that countersunk/machined looking impression. I didn’t mind it so I decided to do all six.The flush pins on the ends are covering up my mistake. When I was forming my scales, I used one of the original liners as a template to mark my holes. Unfortunately I marked and drilled the bolster pin holes instead of the pivot pin holes!
The material is expensive and I had hours into forming them, so I decided to try flush-filling them with brass pins and then finish sanding them with the scales. Next time I’m going to experiment with building the whole knife this way. I think it would look cool, but it would mean doing the final scale finishing after the knife is completely assembled. Have to think some more about this.
Awesome job !
-
Myron

-
Stockman and a Mustang

-
Very nice buddy !

-
-
Just showing off a few of my big Trads. The Tony Bose Stockman is a biggun. I'll be carrying it today.


-
Thanks all! I really appreciate the compliments.
I'm already considering my next knife project!
-
[attach id=0 msg=2355144]

-
Fine pair of knives buddy!

-
Lambsfoot and Spring Street Barlow

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
