What did you use your Sak on today?
-
Yet another fun day in this apartment [emoji1738]
My wife complained that a door in the kitchen won’t open as it should and poked me how is that even possible I haven’t fixed it yet [emoji23]
I looked it the mechanism with a handle pushed down and the problem was surely there

Well here I was once again with my Spirit X Plus - ratchet proved to be invaluable as usual:

It allows to reach places I won’t be able to get to otherwise

Used pliers to pull a pretty greasy part and keep my fingers clean

Having disassembled the handle the problem was really a tad more serious than I expected - mechanism was a cheap ceramic piece of garbage

Thankfully we love not far from a hardware store so I bought and installed a replacement

Though it seems like a direct replacement I actually had to fiddle with it a little bit: bent with pliers and filed an original part a little to make it a perfect fit with a new part - no problem for a Vic metal file

Being done with that later on that day we invited a speSmurfpillst to fix a fridge we have here - it makes lots of noise every now and then. He came for a second time already while I was not at home, not only did he not fix it again having of course charged us more, but he also wrecked a power outlet I had to fix.
Warning: don’t forget to turn the power off before working with outlets, switches and so on!

Disassembled with a ratchet again

And then for the first time really I used a can opener as a flathead screwdriver on a Spirit X - a perfect fit for this particular job

All done and ready for more [emoji1316]

-
The ratchet really earned its keep. I'm convinced that I must have such a thing someday. Nicely done on the repair work!

-
Our electric kettle stopped working. It wasn't really surprising since it's at least 10 years old and it is a cheapo brand to begin with. But before I go get a new one I wanted to see what's wrong with it. Plus my new Workchamp was itching for something to do. So I took it apart


Those inline Philips are awesome, I found it more comfortable to use than in a plier based MT.

My initial suspect was the switch and particularly the relay that's in it. But testing the circuit with another favorite multi tool of mine I found no fault.

So I decided to take apart the base. And surprise surprise - a Chinese security heads on the bolts. I have seen such bits, I even think I have a few somewhere. But that's the first time I ever encounter such bolt in person :D Thought it would be faster if I just make myself a bit, rather than trying to find one I'm not sure I even have. I could have cut it more carefully and evenly but I needed it for something screwed in plastic so


Then the smaller Philips helped disassemble the connector between the base and the kettle.

And here is what I found, not surprising it stopped working and actually I wondered how it worked so far


Some 1200 sandpaper and it was shining again. Assembled everything back and voila - it's working again

Then I told my wife something like "if this thing breaks 6-7 more times and I repair it with this SAK, it will basically pay for it's self"

-
@DavisNikolov said:
Our electric kettle stopped working. It wasn't really surprising since it's at least 10 years old and it is a cheapo brand to begin with. But before I go get a new one I wanted to see what's wrong with it. Plus my new Workchamp was itching for something to do. So I took it apart

Those inline Philips are awesome, I found it more comfortable to use than in a plier based MT.

My initial suspect was the switch and particularly the relay that's in it. But testing the circuit with another favorite multi tool of mine I found no fault.

So I decided to take apart the base. And surprise surprise - a Chinese security heads on the bolts. I have seen such bits, I even think I have a few somewhere. But that's the first time I ever encounter such bolt in person :D Thought it would be faster if I just make myself a bit, rather than trying to find one I'm not sure I even have. I could have cut it more carefully and evenly but I needed it for something screwed in plastic so


Then the smaller Philips helped disassemble the connector between the base and the kettle.

And here is what I found, not surprising it stopped working and actually I wondered how it worked so far


Some 1200 sandpaper and it was shining again. Assembled everything back and voila - it's working again

Then I told my wife something like "if this thing breaks 6-7 more times and I repair it with this SAK, it will basically pay for it's self"

Excellent SAK use there!
I've heard that the fish hook disgorger tip of the 91mm fish scaler can be used on those two-hole security screw heads, but I haven't run across any to try.
-
@DavisNikolov said:
Our electric kettle stopped working. It wasn't really surprising since it's at least 10 years old and it is a cheapo brand to begin with. But before I go get a new one I wanted to see what's wrong with it. Plus my new Workchamp was itching for something to do. So I took it apart

Those inline Philips are awesome, I found it more comfortable to use than in a plier based MT.

My initial suspect was the switch and particularly the relay that's in it. But testing the circuit with another favorite multi tool of mine I found no fault.

So I decided to take apart the base. And surprise surprise - a Chinese security heads on the bolts. I have seen such bits, I even think I have a few somewhere. But that's the first time I ever encounter such bolt in person :D Thought it would be faster if I just make myself a bit, rather than trying to find one I'm not sure I even have. I could have cut it more carefully and evenly but I needed it for something screwed in plastic so


Then the smaller Philips helped disassemble the connector between the base and the kettle.

And here is what I found, not surprising it stopped working and actually I wondered how it worked so far


Some 1200 sandpaper and it was shining again. Assembled everything back and voila - it's working again

Then I told my wife something like "if this thing breaks 6-7 more times and I repair it with this SAK, it will basically pay for it's self"

Way to go and a pure joy to read [emoji1319]
Those in-line Phillips are amazing on a Work Champ - the best I’ve ever tried on a SAK or any other MT, especially a long slim one [emoji1303]
And true - a return on reasonable SAK investment does come in no time at all (how do you define reasonable though?… [emoji23])
-
Oh dear oh dear, I feel like no handyman or handywoman ever lived in this place before [emoji23]
Came out of the shower and wanted to brush my teeth, turned the water tap towards the sink and the main tube left in my hands [emoji23]

No big deal though - I put it back into place in no time and tightened by hand as much as I could

Then I put some duct tape on the Spirit X pliers to prevent any scratches and tightened it just a little bit more

Done deal, but seriously though - what’s about to break next here? [emoji2359][emoji23]
-
Good job the place has a more than competent handyman in residence now! Fingers crossed for the future, Alexanderre!

-
Thank you my friend, hoping for the best really, especially considering yesterday’s tragedy in Vinnytsia 🥲
-
Wanted to take a selfie, yet had no tripod. Thought about it, then used a Victorinox Spirit to be used as a unipod for a Ricoh Theta SC2 (360° camera).
Worked out well. Should of used the GoPro 6 Black, it makes far sexier photos.Awl stuck in the post, thin screwdriver to hold up inside the extension I epoxied to the Theta SC2.
Spoiler:
Over the past year the Theta SC2's nylon tripod adapter broke from use and vibration. Needed a fix, so bought a short adapter, and used Gorilla epoxy to permanently glue the extension in. I do not understand why companies use nylon adapters on their cameras, when most everyone else uses brass. Ricoh's minimum fee to look at any 360 camera is $200 minus shipping. So yeah, $20 is a far better deal.

-
@Outback in Idaho said:
Wanted to take a selfie, yet had no tripod. Thought about it, then used a Victorinox Spirit to be used as a unipod for a Ricoh Theta SC2 (360° camera).
Worked out well. Should of used the GoPro 6 Black, it makes far sexier photos.Awl stuck in the post, thin screwdriver to hold up inside the extension I epoxied to the Theta SC2.
Spoiler:
Over the past year the Theta SC2's nylon tripod adapter broke from use and vibration. Needed a fix, so bought a short adapter, and used Gorilla epoxy to permanently glue the extension in. I do not understand why companies use nylon adapters on their cameras, when most everyone else uses brass. Ricoh's minimum fee to look at any 360 camera is $200 minus shipping. So yeah, $20 is a far better deal.Great job [emoji1319] if you ever share this on instagram - be sure to add #mysakhack hashtag to your post [emoji1316]
-
We returned home for a few days to see how things are going here and oh dear we’ve found a mess we left in a rush [emoji44]
Among many other things I’ve replaced a few parts in our espresso maker using a pair of Swiss Champ pliers

Good like new [emoji1303]

-
@alexanderre said:
We returned home for a few days to see how things are going here and oh dear we’ve found a mess we left in a rush [emoji44]Among many other things I’ve replaced a few parts in our espresso maker using a pair of Swiss Champ pliers

Good like new [emoji1303]

I (once) dismantled the coffee maker (machine, not Mrs Surge) and was advised
NEVER to remove the seal.I now give it a rinse (when she's not here
)I dare not show her this :ahhh
-
@alexanderre said:
We returned home for a few days to see how things are going here and oh dear we’ve found a mess we left in a rush [emoji44]Among many other things I’ve replaced a few parts in our espresso maker using a pair of Swiss Champ pliers

Good like new [emoji1303]

It might be an unpopular opinion but I love the Victorinox pliers. I haven’t had my Deluxe Tinker long but I used them several times before I had to put it in a drawer for a month for the Spartan Challenge.
I found them to be very handy in quite a few situations, especially for someone who does a lot with small electronics and kids toys.
-
@marlowe221 said:
It might be an unpopular opinion but I love the Victorinox pliers. I haven’t had my Deluxe Tinker long but I used them several times before I had to put it in a drawer for a month for the Spartan Challenge.I found them to be very handy in quite a few situations, especially for someone who does a lot with small electronics and kids toys.
Totally agree, those are amazing for the electronic works [emoji1303]
-
@alexanderre said:
I’ve replaced a few parts in our espresso maker using a pair of Swiss Champ pliersCoffee is of paramount importance. Nicely done!

@marlowe221 said:
I love the Victorinox pliers.They are a surprisingly effective little tool. Makes me wish the Mechanic and the Special Mechanic were still in production.
-
Executive nail file popped the shift release cover, and shifted the Kia into neutral so I could push it for a jump. I think I left the hazards on for about 3 days... opps.
-
I use alox saks as a worry stone. The texture is quite nice and stimulating.

-
Fishing with my PT Army Aitor Al Ligator. Pliers for cutting line, and untie small knots, close weights, blade for opening weights, and bottle opener for beer.
Classic sd for cleaning nails full of worm guts. -
Scraping off a candle wax spill from my jeans...only to find I scraped off the jeans too. Funny...yes. Double
funnyif you know I only have one pair of jeans at a time and these were relatively new![attach id=0 msg=2357700]
Edit: are we allowed 'political' discussion on the forum? Anyone else aware of the Dutch Farmers Protests across Europe starting in the Netherlands? Any country who's government is going along with the green agenda will suffer the same state takeover. WAKE UP PEOPLE

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login