☆ ☆ ☆ The Dean 30-day ☆ ☆ ☆
-
Day 23
Soddy Jr. helped at some maintenence work today.

-
Day 23:
Today I tried to "fix" the edge on the Lambsfoot. I used a Dremel to cut in a choil, which removed some of the recurve. I then used coarse stones to grind out the waviness in the edge. This took longer than expected and in the process, I removed enough metal to grind out the choil!
Finished up with finer stones, the Hard Arkansas stone for a keen edge. Stropped with a 1/2 micron diamond paste on a leather strop. The blade is a bit thinner, but wicked sharp. I don't think I did a perfect job, but I think it is better. I'm still tempted to add another choil, but that can be done later. :D
Hope Dean would have approved!

-
Today I tried to "fix" the edge on the Lambsfoot. I used a Dremel to cut in a choil, which removed some of the recurve. I then used coarse stones to grind out the waviness in the edge. This took longer than expected and in the process, I removed enough metal to grind out the choil!
Finished up with finer stones, the Hard Arkansas stone for a keen edge. Stropped with a 1/2 micron diamond paste on a leather strop. The blade is a bit thinner, but wicked sharp. I don't think I did a perfect job, but I think it is better. I'm still tempted to add another choil, but that can be done later. :D
Hope Dean would have approved!

Looks much better.
I'm quite certain Dean would approve. 
-
Day 23
Case Stockman and a Camillus Jacknife

-
Today I tried to "fix" the edge on the Lambsfoot. I used a Dremel to cut in a choil, which removed some of the recurve. I then used coarse stones to grind out the waviness in the edge. This took longer than expected and in the process, I removed enough metal to grind out the choil!
Finished up with finer stones, the Hard Arkansas stone for a keen edge. Stropped with a 1/2 micron diamond paste on a leather strop. The blade is a bit thinner, but wicked sharp. I don't think I did a perfect job, but I think it is better. I'm still tempted to add another choil, but that can be done later. :D
Hope Dean would have approved!

looking great Nix.

-

Looks much better to my untrained eye. -
Thanks, fellas.
I ended up taking off more steel than expected, but I do think it is better and will be easier to resharpen well later.
This knife has had some quirks right out of the box, but I really like it anyway. Perhaps it is more personal for having some quirks.

Regardless, it makes for a nice carry and I haven't cut myself with it...yet.

-
-
-
Day 23
Opened a few packages for the grandkids, but nothing else:

-
-
Today I tried to "fix" the edge on the Lambsfoot. I used a Dremel to cut in a choil, which removed some of the recurve. I then used coarse stones to grind out the waviness in the edge. This took longer than expected and in the process, I removed enough metal to grind out the choil!
Finished up with finer stones, the Hard Arkansas stone for a keen edge. Stropped with a 1/2 micron diamond paste on a leather strop. The blade is a bit thinner, but wicked sharp. I don't think I did a perfect job, but I think it is better. I'm still tempted to add another choil, but that can be done later. :D
Hope Dean would have approved!

It looks pretty damn good to me

-
Day 23/30
Another day at work.
Enviado de meu Moto Z2 Play usando o Tapatalk
-
The Dean51 Traditional Challenge
Great Eastern Cutlery Bull Nose - Red Micarta
Day 23Put in a hard day of fishing. Caught some small white bass but that was it. Now back at the room to feast on this sammich

-
Day 23
Case 47 pattern Stockman takes a quick break from fingernail detail to pose for a photo…

-
Day 23
Ocean blue Case mini stockman. I've always liked the spey blade on my stockman knives but I've never used them for their original purpose.
-
@Gareth said:
This RR Red Pick Bone Peanut is one that grew on me.I'm still a little bugged by that R...but a Peanut with a spear point blade!

@Rich_SD said:
If I learned one thing in this challenge, it's that I prefer carrying smaller, lighter pocket knives. I decided to go to the extreme end of this and buy a very small knife - a Case Tiny Trapper.
My preference for carriers, however, is between three and four inches closed.@Nix said:
Today I tried to "fix" the edge on the Lambsfoot.You certainly did better than I would have!

That Cammie...

A whole bunch of superb trads on show!

Day 23
Not a collection (LoopCutter's is superb!), but a singular Stockman: a Schrade 834UH. Being 3 5/16 inches long and legal in any area that hasn't gone completely insane about blade lengths, this one would be a great carrier. But as long as I own it and things still have value as collectibles, it'll stay all pretty and unused (except for very occasional paper slicing).
[attach id=0 msg=2356802]

-
Thx Nix!

Beautiful trads and some awesome info in this thread as well!
Day 23
Winchester Jumbo Trapper.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




