Locks up Challenge August 2022
-
@SteveC said:
That it is :ahhhMajor fail on the locks up
:D
Can you clarify for this Pulse newbie!
From my view it does appear weak.
Also, you exchanged the can/bottle/package opener for the AWL. Makes perfect sense.
I like the three flat blades, but confused by the small Phillips, afraid that will break if torque is required.
Also, question why middle size flat blade is beveled on one side instead of tapered on both.
This is interesting to me, as my interest in LM MT did not start until 2014 or so when I acquired a ST300 at lowes for $40 and used for my work.
-
@LoopCutter said:
Can you clarify for this Pulse newbie!From my view it does appear weak.
Also, you exchanged the can/bottle/package opener for the AWL. Makes perfect sense.
I like the three flat blades, but confused by the small Phillips, afraid that will break if torque is required.
Also, question why middle size flat blade is beveled on one side instead of tapered on both.
This is interesting to me, as my interest in LM MT did not start until 2014 or so when I acquired a ST300 at lowes for $40 and used for my work.
The Phillips and the FH screwdrivers are holdovers from the PST. The Phillips is plenty strong as can be seen by all the old PST that are still around with intact Phillips. You do see plenty of snapped off small flatheads on the Old PST's I think the bevel was probably just easier to do on one side than both ....so cost.
-
Congrats on getting a Pulse, LC
except for the blade being plain edge, the Pulse has the exact same toolset as a PST II
The Phillips, is as all the old school tools are pretty good and pretty tough 
The ST200 has the exact toolset as the ST300 (just in the older tool format)

@SteveC said:
That it is :ahhhMajor fail on the locks up

:D
:D -
You could make that a whole series!

@Barry Rowland said:
Nothing happening at the moment.Sometimes that's a good thing.
@McStitchy said:
ST200 being good company checking on the first peas and stuff...Black oxide, no less!

Great work by awl!

Day 6
More lanyard work. The pock-marked ends on the Tinker's lanyard were bugging me, so I used the Pulse's scissors to shorten them and the pliers to crimp the ends.
[attach id=0 msg=2360109]

-
Changed over to the Pulse this weekend:

@LoopCutter said:
Whoa!
I thought it was darn near a major crime to post a picture of a ST200 and I suspect a Pulse too without the Rocker lock levers in view???
not squealing or such 
@SteveC said:
That it is :ahhhMajor fail on the locks up

:D


What sort of fine do I owe? :D
-
@Poncho65 said:
Congrats on getting a Pulse, LC
except for the blade being plain edge, the Pulse has the exact same toolset as a PST II
The Phillips, is as all the old school tools are pretty good and pretty tough 
The ST200 has the exact toolset as the ST300 (just in the older tool format)

:DThank you Poncho!
I am very please and excited about what I have learned about the Pulse since my fellow members started this challenge. Kinda sorry my attention was immersed in the Dean Memorial Challenge! Not really, One at a time 
@SteveC said:
The Phillips and the FH screwdrivers are holdovers from the PST. The Phillips is plenty strong as can be seen by all the old PST that are still around with intact Phillips. You do see plenty of snapped off small flatheads on the Old PST's I think the bevel was probably just easier to do on one side than both ....so cost.Excellent points!

I know I had tested my other LM MTs very hard and never a fail.
Trust a Leatherman and PERSON WHO CARRIES ONE!!! (If he is a MTo member)
-
Day 6 of 30

ST 200 didn't have much to do today, so my son managed to draw a portrait.

And on Sunday the festive Pulse :ahhh


-
That is impressive Willie!

-
Thanks, I will tell my son 
And even more detailed...
-
Day 1
Just to proof I have been reading this challenge

[attach id=0 msg=2360143]Good info being shared


-
-
@LoopCutter said:
Has the Mrs. allow you back into the house since the previous Trad Challenge? I know you suffered after that!!!
I recommend a warning your honor, but have read about previous offenders donating to the MTo monthly fund…

I am allowed in the house, but I am on probation. One misstep, and it is back to the shed :D
-
Hello to the Team on day 6.
Some cable tie cutting today.


-
I.love it here!!

-
Dropping in.

-
Day 6
Inspired by Farmer's pic


-
An excellent Day 6

On to Day 7 now 8)

-
Day 7: Opened up the vent hole on a ☕ with the awl. This is shaping up to be a great challenge everyone! We're already a quarter of the way through!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
