What did you use your Sak on today?
-
@old Lefty said:
Kadjar with the 1,5 diesel engine.
There are few issues with the design and exeution methinks. Firstly the cap is in a hole and does not have normal threads. This is a page from Mercedes playbook. However in a Mercedes the cap is just the cap. In Renault the dipstick is attached the the cap. So, in theory opening the cap pulls out the dipstick. However, the material used is plastic, so it only works once or twice. After that one needs to pull the dipstick out. With pliers...To add to the injury, there is no way to check oil level other than the dipstick.
Renault has loaded the thing with all kinds of moderm widgets and electric what nots but oil has to be checked from under the bonnet.Lähetetty minun SM-T515 laitteesta Tapatalkilla
Oh wow, there still are crazy things out there [emoji2]
-
I used the pliers on my Champ to loosen a tight coax cable. The small blade cut open several boxes.
-
My wife car had a screw in the tire,. Tinker came out and used the bottle cap opener to remove the screw, luckily it is not leaking.
-
I needed a piece of wood so I took a branch and used a saw and a small blade, to refresh coffee and a protein bar :)

-
Amazing carries awl

Today the DT helped with packaging of a trans-atlanic parcel (just need to get the obligatory brown parcel paper)

-
...a piece of decorative wrapping on a stool leg undone, didn't try to wrap...
CUT ... awl better can't tell.
-
Found some weds growing in a stump in the garden (which would've grown to a large bush that would be hard to get rid of) with my Gardener, as it was the cheapest knife I had on me. Not to mention sharpest, as I find the chisel grind a joy to sharpen. Even a caveman could do it.
-
Bad quality photo but Aquarius scaled Classic opening up a packet of new knives

and this is what I got:

2 handmade navajas from Joker. Sevillana and Classico.
Especially the Sevillana seems very nice. At 47 euros it is almost a steal. Classico has a slipjoint lock but at 19,- I’m not complaining on that either -
Yesterday I used the can opener on my Camper to remove a bunch of thick staples from the back of an old picture frame at the request of Mrs. marlowe221.
The curve on the sharp side of the can opener is perfect for a job like that!
-
Built a shoe cabinet almost exclusively with my Swisschamp XLT. Also: Disassebled and reassembled a cupboard with it.
-
I had a better golf bag but the outside was not the best, so I started using a utility knife to cut the bag yet all it did was rip the bag, so I broke out the FarmerX and it just sliced right through and made it so much easier, so I ended up getting all the pockets and whatnot off and cleaned it up, then switched it out with the little kiddy bag, this bag is so much nicer all divided and padded at the top and totally keeps the staffs upright!
JR
-
Used the main blade on the gifted Tinker from SOS to clean up some garlic for future cooking adventures.
-
Wait... I should have remembered it was Waiter Wednesday

-
I used the scissors on my Huntsman to cut open the bag inside a box of cereal. The darn thing just wouldn’t open and I didn’t want to explode it all over the kitchen.
-
Went to the post office to ship a couple of SAKs that I've just sold on eBay, only to discover that the tracking sticker USPS uses is too big to fit on the little boxes that I'd packed them in.
As a result, I had to use the blade on my Wenger Highlander to free them from their cardboard prison until I can get them into some padded envelopes.
On that note, do any of you know of a good way to get dry tape gunk off of a knife blade?
-
Double post. Sorry about that.
-
That's OK DM
Wondered why an old DVD of my music class wasn't playing.
Needed the Spartan tweezers to pull it out !!
-
@dimledger said:
Went to the post office to ship a couple of SAKs that I've just sold on eBay, only to discover that the tracking sticker USPS uses is too big to fit on the little boxes that I'd packed them in.As a result, I had to use the blade on my Wenger Highlander to free them from their cardboard prison until I can get them into some padded envelopes.
On that note, do any of you know of a good way to get dry tape gunk off of a knife blade?
I use veggie oil or non stick spray.
-
You can also use rubbing alcohol (isopropanol), also used in alcohol prep pads in FAK, or lighter fluid. Some people swear by orange oil.
Important: stay clear of cellidor parts with these

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login