Loaded Pockets Challenge August 2022
-
Day 18

Used the scissors on Mountaineer to cut open a new micro sd card, and just realized I totally wrote the wrong day on my last post. -
@powernoodle said:
Killing some cardboard with the Screwpop utility blade.I prefer a utility knife for that task...I just wish it occurred much less frequently than it does!
@comis said:
Used the scissors on Mountaineer to cut open a new micro sd card...Those Victorinox scissors can handle that plastic, no problem, for many years!

Day 18
No changes to the loadout, nor any exciting use...just package opening.

-
Day 18
I had an embarrassing situation arise following my consumption of a rather dry and crumbly sandwich for lunch that convinced me I needed something more practical than a challenge coin to fiddle with so I will be carrying a mustache comb as my fidget for the next few days.

-
Day 18
Changed out the Fixi and MT to BR Mountaineer II and LM Style PS.

-
<u>Day 17</u>
Missed a couple of days...
OK, this thing in the pic is a helper step. It's basically a step-stool from IKEA, but with a frame screwed to the top, so toddlers can stand up next to you (or Mummy) at the sink and learn all about washing up, or help prepare dinner at the kitchen counter. The frame stops them from falling.
In the middle, the sharp-eyed among you will notice a SwissChamp... The really sharp-eyed will notice the Phillips screwdriver, the woodsaw and the file. All three were used as I knocked this thing up in the workshop/garage. Not my best work, but functional and has already seen heavy use these past two days.[attach id=0 msg=2362461]

-
Day 19

A fair bit of paperwork today, and mountaineer is perfect for removing all the staples. -
@Farmer X said:
I prefer a utility knife for that task...I just wish it occurred much less frequently than it does!
Those Victorinox scissors can handle that plastic, no problem, for many years!
Day 18
No changes to the loadout, nor any exciting use...just package opening.

@Sos24 said:
Day 18
Changed out the Fixi and MT to BR Mountaineer II and LM Style PS.

Do you carry the fixed blade via the belt loop? I never can get use to having the handle above the waistline, and find a daggler quite handy for the setup, especially when I am sitting down.
Missed a couple of days...
OK, this thing in the pic is a helper step. It's basically a step-stool from IKEA, but with a frame screwed to the top, so toddlers can stand up next to you (or Mummy) at the sink and learn all about washing up, or help prepare dinner at the kitchen counter. The frame stops them from falling.
In the middle, the sharp-eyed among you will notice a SwissChamp... The really sharp-eyed will notice the Phillips screwdriver, the woodsaw and the file. All three were used as I knocked this thing up in the workshop/garage. Not my best work, but functional and has already seen heavy use these past two days.[attach id=0 msg=2362461]
Very nice! Surprised how much you could achieve with just a SC!

-
@comis said:
Very nice! Surprised how much you could achieve with just a SC!
Yeah, I cut the horizontals on the hand-holes at the top, sawed through the wooden pole (no idea what that used to be), used the file to finely soften all the rough sanded edges, awled some pilot holes (yes, I know I didn't have the awl out. I forgot), and every screw was driven in by hand using that in-line Phillips. Might have used the blade and chisel a bit, too.
Anyway...
<u>Day 18</u>
I had to do a bit of reconstruction for this one:
This is the Joby GripTight ONE Micro Stand for smartphones:[attach id=0 msg=2362514]
It's a simple C-clamp that extends under spring pressure, to grip the sides of your phone. What makes it cool is that there's a folding tripod attached to the underside, so you can precisely position your smartphone for easy viewing. The tripod attaches using a standard ¼" camera threaded screw, so it will support small and small-ish SLRs, DSLRs, and other stuff with such a screw socket!
I usually have it set up in the evening so I can watch the ToddlerCam, but it also folds up small enough (see my Day 1 photo back on Page 4) to fit in a single stack .45ACP 1911 magazine pouch, which is why I EDC it. Comes in handy sometimes, if you need a screen displaying something and want your hands free. I used to watch episodes of stuff when I was in the workshop.
The reason it's been recreated here with my old phone is that I have the larger version to fit my larger Galaxy S21, but that's also what I use to take these photos in the first place!Rear view:
[attach id=1 msg=2362514]
Bonus content!!
I put a new polycord
lanyardfob on my Classic SD, which meant cracking out that lighter to burn the ends down:[attach id=2 msg=2362514]



-
<u>Day 19</u>
OK, just a quick one for today.....
[attach id=0 msg=2362528]
Looks like a right dog's dinner, dunnit?
That's cuz it is!Beef & Heart raw meat, with mixed veg and biscuits. Everything a pair of pups need... and the SAK is simply to open the plastic bag cleanly.
I have to say, I was never a massive user of the scissors until I joined this forum, after which they seem to have become a daily use tool....
-
Powernoodle Day 19
*
Because I live on the wild side, I switched out my Fisher space pen for a Staedtler 430 F. Mrs. Powernoodle is a pen junky and I often steal one from her latest 12-pack. The 430 F has a fine ball and a pleasing old-school feel like a Bic from my childhood. * -
Nice photos and loadouts, y'awl!

Day 19
The usual changes to the loadout occurred today. I awlso changed the 58mm SAK and added a Gerber Mullet, just for the heck of it.
[attach id=0 msg=2362562]

-
@comis said:

Do you carry the fixed blade via the belt loop? I never can get use to having the handle above the waistline, and find a daggler quite handy for the setup, especially when I am sitting down.Very nice! Surprised how much you could achieve with just a SC!

I do sometimes, but usually I prefer crossdraw or horizontal.
It doesn’t bother me that much as long as the handle does not stick up that far above the belt. But I am use to carry things on my belt that stick above the belt due to carrying a radio frequently in the Navy and sometimes a handgun.
I have a custom crossdraw sheath on order for the Mountaineer which I am looking forward to.
-
Day 19
The new pouch came in and other than the slot pockets being tight, I think it is going to work nicely. Only changes other than pouch was adding some green in the form of Spydie Salt, Voyageur and BR Essential.

-
Day 19
Slow day today. I only had need of a toothpick and used the one from the 58mm Classic SD.


-
Day 20

No use today, but swap in the MTO coin tool and play with it while doing some art work for previous challenge. -
@Tasky said:
Yeah, I cut the horizontals on the hand-holes at the top, sawed through the wooden pole (no idea what that used to be), used the file to finely soften all the rough sanded edges, awled some pilot holes (yes, I know I didn't have the awl out. I forgot), and every screw was driven in by hand using that in-line Phillips. Might have used the blade and chisel a bit, too.Anyway...
<u>Day 18</u>
I had to do a bit of reconstruction for this one:
This is the Joby GripTight ONE Micro Stand for smartphones:[attach id=0 msg=2362514]
It's a simple C-clamp that extends under spring pressure, to grip the sides of your phone. What makes it cool is that there's a folding tripod attached to the underside, so you can precisely position your smartphone for easy viewing. The tripod attaches using a standard ¼" camera threaded screw, so it will support small and small-ish SLRs, DSLRs, and other stuff with such a screw socket!
I usually have it set up in the evening so I can watch the ToddlerCam, but it also folds up small enough (see my Day 1 photo back on Page 4) to fit in a single stack .45ACP 1911 magazine pouch, which is why I EDC it. Comes in handy sometimes, if you need a screen displaying something and want your hands free. I used to watch episodes of stuff when I was in the workshop.
The reason it's been recreated here with my old phone is that I have the larger version to fit my larger Galaxy S21, but that's also what I use to take these photos in the first place!Rear view:
[attach id=1 msg=2362514]
Bonus content!!
I put a new polycord
lanyardfob on my Classic SD, which meant cracking out that lighter to burn the ends down:[attach id=2 msg=2362514]
Love those Joby tripods, comes in really handy especially when you just want a group photo or making timelapse.

@Farmer X said:
Nice photos and loadouts, y'awl!
Day 19
The usual changes to the loadout occurred today. I awlso changed the 58mm SAK and added a Gerber Mullet, just for the heck of it.
[attach id=0 msg=2362562]
The inox Opinel is nice, though I do collect (and sometimes use) my traditionals, my OCD still constantly want to keep the carbon blades from developing patina.
:D -
@Sos24 said:
I do sometimes, but usually I prefer crossdraw or horizontal.It doesn’t bother me that much as long as the handle does not stick up that far above the belt. But I am use to carry things on my belt that stick above the belt due to carrying a radio frequently in the Navy and sometimes a handgun.
I have a custom crossdraw sheath on order for the Mountaineer which I am looking forward to.
Looking forward what you think of the new sheath.
I love the idea of having a lightweight fixed blade and sheath that doesn't profile under a shirt. -
Powernoodle Day 20

*I recommend carrying one or two of these in the pocket, and keeping more in the vehicle. As with a light or a Sharpie, you don't realize how much you need these things until you start carrying them. Super handy for everything from cleaning phone screens to sticky fingers to cuts and scrapes. * -
Day 20
Changed out 91/93mm and pen

Used the Essential and Salt, for wood processing and lighting twig stove in coffee making.
Also used Yeoman’s mag glass


-
@comis said:
My OCD still constantly want to keep the carbon blades from developing patina.I don't even worry about that anymore. Patina looks better than rust!
@powernoodle said:
Super handy for everything from cleaning phone screens to sticky fingers to cuts and scrapes.Not to mention tape gunk that builds up on knife blades!
Sweet scales on that one!

Day 29
No changes to the loadout...just a photo of Alox and hornbeam goodness for today.
[attach id=0 msg=2362744]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login