Gerber dual force
-
Good grief. I finally landed one, but it was way too much fun dealing with Canadian Tire. I finally managed to get them to order me one, and it didn't arrive in a timely manner. When I inquired, other staff employees told me I would never see it and to give up. Unknown to me, they canceled my order somehow, or at least my name attached to one. I checked online and found that my local Canadian Tire was going to get one in. I assumed it was mine. I was right, but not attached to me as I found out earlier today. Yesterday, the online web site stated that there was a Dual Force in stock at the local store and that it would be ready for pick up by 11 am. I went there only to find out that it would be released for tomorrow (today). I ensured that my name was on it and that they would hold it for me. Of course, I should have known that it would go sideways. I got there at 7 am only to find that it was hanging with a price tag ready for the first person to pick it up. I would have went ballistic if someone beat me to it. Thank God I didn't trust them and showed up at first opening. Lots of run around to get my paws on this one...with the Canadian Tire fun and other places running out of stock whenever I found a place I could buy it from. It is a rare model up here in Canada.
<a href="https://flic.kr/p/2nx2tJ4" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52203284427_13fb9da22d_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20220709_085814A by Chako, on Flickr
<a href="https://flic.kr/p/2nx2tKg" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52203284497_5cfac092da_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20220709_085748A by Chako, on Flickr
<a href="https://flic.kr/p/2nx2tH2" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52203284367_6563fe8bb9_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20220709_091858A by Chako, on Flickr
<a href="https://flic.kr/p/2nx7Cfm" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52204288656_aaa95d7f2b_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20220709_091906A by Chako, on Flickr
<a href="https://flic.kr/p/2nx7CeQ" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52204288626_c3912ad7cb_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20220709_091924A by Chako, on Flickr
<a href="https://flic.kr/p/2nx7Cej" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52204288596_8621ddc6d0_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20220709_091941A by Chako, on Flickr
<a href="https://flic.kr/p/2nx7Jgw" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52204308908_d7746779bc_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20220709_092006A by Chako, on Flickr
<a href="https://flic.kr/p/2nx91k4" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52204558049_c97df062f8_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20220709_092021A by Chako, on Flickr
<a href="https://flic.kr/p/2nxadeD" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52204793215_a548a3f9c2_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20220709_092310A by Chako, on Flickr
<a href="https://flic.kr/p/2nx9gsJ" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52204608954_ab6368e329_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20220709_092128A by Chako, on Flickr
The best part, I got it for 89 Canadian. Someone told me they were now going for 140 Canadian.
-
Glad you were able to get one, Chako! It will look awesome in your collection!!!!

-
Will it see any use, Chako?
I think mine will turn out to be a pretty useful beater. Maybe not a belt or pocket carry, but definitely a regular tool bag or truck carry.
-
Gave my Dual Force a quick workout alongside a Leatherman Crunch this morning when I got home from a night shift.
The Crunch was actually the better tool for the job, with the shorter handles and slightly narrower head making the difference.
[attach id=0 msg=2354087]
[attach id=1 msg=2354087]
[attach id=2 msg=2354087]
[attach id=3 msg=2354087]




-
@Crunchie64 said:
Any sign of your Dual Force yet?Interested to know what you think of it.
Sorry Crunchie
Been so busy with diy
Yes, it arrived last Wednesday. I’ve only had it out of the box for a few minutes.
It’s huge!!
A few things I don’t like…
The plier head teeth are blunt (rounded off) I think that will hugely affect gripping force, likewise the ‘sandwiched’ head is rather cheap looking, was expecting it to be more like the legendary Schrade ST series. Also never been keen on Gerber blades. The MP series all have naff puny brittle blades, the dual force blade seems out of place considering how huge the tool is.
To sum up, I don’t think the build quality is a patch on the Center Drive.Just my thoughts…

-
I can’t argue with any of that. The sandwich plier head is a bit strange, and the blade is no match for a Leatherman.
I do quite like the screwdriver, although it sits awkwardly when folded in.
The pliers are effective and do seem to grip well, but are very bulky. Not a tool for working in tight spaces. -
I just got one of these. I bought it from my local Ace Hardware for $95.00 (I had 5.00 in Ace Rewards!). I also wish it was made here in the US. I do not care about the "politics", but Gerber and other companies make things overseas because of cheap labor, and in my opinion, this tool should cost around $60.00 to $70.00. I am also taking into consideration that nowhere on the package does it say what kind of steel the tool, knife blade, etc, is made out of. Since it is not listed, I will assume it is a lower grade steel, maybe not the worst, but still a lower grade. With all that being said, these are my first impressions.
- I love the look and feel of it. It is large and comfortable in my hands.
- The driver, just like the Center Drive, is the best I have seen on any multitool. Just the fact that it does not use odd sized, proprietary sized bits is the best part of it.
- Most of the tools are too hard to open, except the driver. I do not mind the driver being this way, but the others need adjusting, and just like Leatherman, Gerber makes it so it cannot be adjusted without using some specialized tool. Speaking of which, does anyone know where one can get their hands on a tool, or a bit for a driver to do this?
- Even though the file on the tool looks like good quality, I would have LOVED to have a nice large pair of scissors there in its place!
Just my initial impressions and opinion. All this may change if the tool becomes a user for me!
-
@mikekoz said:
I just got one of these. I bought it from my local Ace Hardware for $95.00 (I had 5.00 in Ace Rewards!). I also wish it was made here in the US. I do not care about the "politics", but Gerber and other companies make things overseas because of cheap labor, and in my opinion, this tool should cost around $60.00 to $70.00. I am also taking into consideration that nowhere on the package does it say what kind of steel the tool, knife blade, etc, is made out of. Since it is not listed, I will assume it is a lower grade steel, maybe not the worst, but still a lower grade. With all that being said, these are my first impressions.- I love the look and feel of it. It is large and comfortable in my hands.
- The driver, just like the Center Drive, is the best I have seen on any multitool. Just the fact that it does not use odd sized, proprietary sized bits is the best part of it.
- Most of the tools are too hard to open, except the driver. I do not mind the driver being this way, but the others need adjusting, and just like Leatherman, Gerber makes it so it cannot be adjusted without using some specialized tool. Speaking of which, does anyone know where one can get their hands on a tool, or a bit for a driver to do this?
- Even though the file on the tool looks like good quality, I would have LOVED to have a nice large pair of scissors there in its place!
Just my initial impressions and opinion. All this may change if the tool becomes a user for me!
"companies make things overseas because of cheap labor"
*<u>
Skilled Labour isn't cheap and cheap labour isn't skilled </u> * (I hate outsourcing
) -
I really do like this tool. When I have tasks that require the super heavy duty bulkiness it performs admirably. However as a day-to-day tool it's overly heavy and... I miss the one-hand opening pliers way more than I thought I would. It's why I would never really seriously carry a leatherman long term. As much as I like the feel of the surge and wave, I need pliers far more often than I need blades. I like Gerbers and SOGs because they can be opened with the flick of a wrist, and closed just as easily.
When it comes to heavy-duty tasks though, nothing quite works like this. I'm impressed.
Charles.
-
The Dual Force is now available in black oxide for those interested: [attach id=0 msg=2402212]

-
Black is Neat but bieng a Truck Driver...Shiny is better if I drop it in the Muck and Mud
-
@ChopperCharles said:
I really do like this tool. When I have tasks that require the super heavy duty bulkiness it performs admirably. However as a day-to-day tool it's overly heavy and... I miss the one-hand opening pliers way more than I thought I would. It's why I would never really seriously carry a leatherman long term. As much as I like the feel of the surge and wave, I need pliers far more often than I need blades. I like Gerbers and SOGs because they can be opened with the flick of a wrist, and closed just as easily.When it comes to heavy-duty tasks though, nothing quite works like this. I'm impressed.
Charles.
Try the leatherman p2 or p4 they are one hand open. I’m with you I like pliers that open one handed
Sent from my iPhone using Tapatalk
-
After having a hard time getting Canadian Tire to order me one, I now find them hanging on one of their display walls ready for sale. I had to get another one.
<a href="https://flic.kr/p/2oCsKAZ" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52921154889_eadc6bc558_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20230220_175257A by Chako, on Flickr
<a href="https://flic.kr/p/2oCoWNu" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52920412112_6680c379fd_4k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20230220_175503A by Chako, on Flickr
-
I have a BO on the way bought from Gerbers Half price end of summer sale

-
Congrats pal; be sure to post pictures when it arrives!

-
I'm really interested in this tool. Those pliers look like they can grip!
-
Barry, I've been thinking the same thing since these came out but I didn't want to buy another tool over $100 just for giggles. 50% off for the end of summer sale (with free shipping too) just made it too good to pass up and I wouldn't even have known about the sale if Steve hadn't mentioned it.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
