Rabbit hole - EDC light
-
@Sos24 said:
How do you shut it off? I read the instructions, but those seem to simultaneously lock out the light.I don’t remember how I did it but it goes something like:
3 clicks to go to battery check then click n hold to bring you to advanced configuration settings of the aux light. Then I just kept pressing 1 click after blinks as ‘1’ = disable. I basically opted to disable all indicator LED functions.It takes practice to count blinks but this newbie did manage it so I’m sure you would also!
-
@Zephon said:
I don’t remember how I did it but it goes something like:
3 clicks to go to battery check then click n hold to bring you to advanced configuration settings of the aux light. Then I just kept pressing 1 click after blinks as ‘1’ = disable. I basically opted to disable all indicator LED functions.It takes practice to count blinks but this newbie did manage it so I’m sure you would also!
Thanks. Your memory was accurate and I was able to do it.
-
A little bit deeper in the rabbit hole and a little bit deeper into ‘empty pockets’ lol
Anyway, first up is a Wurkkos TS21 5000k with Nichia emitters. Loving the pinkish hue it gives. Much much better than the greenish SST40 hue….at least for me. I’m just bothered by the indicator light that will light up blue for whatever reason the torch only knows. This led me to….
I purchased a IF25A 4000k (SST20 x 4, if I remember correctly) during a recent sale. Although I personally prefer 5000k, the choices were only between 4000k and 6000k only so I went 4000k based on reviews. I just got it yesterday so everything is still in ‘default mode’. The only thing I did was go to Advanced Mode.
I wanted to have some fun so I also got a short tube for 21700 lights and a couple of pocket clips. My TS21 now feels like a totally different light with a short tube and a 20350 battery (yes, I found one!) and a pocket clip. I also attached a pocket clip to the IF25A. Though a lot has been said about the Sofirn pocket clips, I still find them very useful even if just to prevent the flashlight from rolling down on its side. The way I attach the pocket clip also helps me index my fingers over the light, as much as the power button does.



-
Nice additions.
-
Another addition. A rather unique one I would say. It’s an HD15R. Instead of flood and throw emitters, it’s got flood and red emitters. I still have to take it to its paces - hopefully it becomes more than just a collector’s piece stuck in a shelf or bag.
I have to admit though that if there’s something I find missing on my headlamps, it’s an always-on aux light.

-
I only have one red led light. Its great tho. I would like to see a light with aux laser in green :D
Nice light btw.
-
@Zephon said:
Another addition. A rather unique one I would say. It’s an HD15R. Instead of flood and throw emitters, it’s got flood and red emitters. I still have to take it to its paces - hopefully it becomes more than just a collector’s piece stuck in a shelf or bag.I have to admit though that if there’s something I find missing on my headlamps, it’s an always-on aux light.
Nice light!
What do you mean by an always on aux light btw?
-
@GearedForwards said:
The Olight Arcfeld is exactly this, you may be interested
I'll have a look thanks.
-
@GearedForwards said:
Nice light!What do you mean by an always on aux light btw?
Something like what these guys have. They’re all Anduril 2 lights though. The SC31 and TS21 have theirs on the power button, the TS10 has it on the business end. I find it very useful when stumbling through the dark looking for a flashlight.
From what I’ve read, the drain isn’t that bad as long as the aux light is either on ‘low’ or in ‘blink’.

-
@Zephon said:
Something like what these guys have. They’re all Anduril 2 lights though. The SC31 and TS21 have theirs on the power button, the TS10 has it on the business end. I find it very useful when stumbling through the dark looking for a flashlight.My larger camping/EDC lights all get GITD fobs or lanyards. This doesn’t put out much light, but it’s enough to locate the flashlight in a dark tent or hotel room with eyes adjusted to the dark.
-
@Zephon said:
Something like what these guys have. They’re all Anduril 2 lights though. The SC31 and TS21 have theirs on the power button, the TS10 has it on the business end. I find it very useful when stumbling through the dark looking for a flashlight.From what I’ve read, the drain isn’t that bad as long as the aux light is either on ‘low’ or in ‘blink’.
Ohhh, I'm actually the opposite, I hate lights like that because I don't like any degree of drain that I could otherwise avoid. I can see the value of it if you're trying to find a light in a bag in the dark or something though.
-
@GearedForwards said:
Ohhh, I'm actually the opposite, I hate lights like that because I don't like any degree of drain that I could otherwise avoid. I can see the value of it if you're trying to find a light in a bag in the dark or something though.The forum favourite Lumintop Tool AA has the same thing, in that the tail switch illuminates. Very useful for when it catches on your pocket edge, or your hands are slippery and you drop it in the dark, or something.
Drain is eliminated by unscrewing the tailcap a half turn when you know you won't be using it immediately... although user tests suggest that you'd need it on 24/7 for about 3 weeks before the battery is drained to the point where only the lowest mode is available. -
@Tasky said:
The forum favourite Lumintop Tool AA has the same thing, in that the tail switch illuminates. Very useful for when it catches on your pocket edge, or your hands are slippery and you drop it in the dark, or something.
Drain is eliminated by unscrewing the tailcap a half turn when you know you won't be using it immediately... although user tests suggest that you'd need it on 24/7 for about 3 weeks before the battery is drained to the point where only the lowest mode is available.Oh I'm familiar with it, but it's only on the newer versions and when you use 14500s. I have two Tool AA 2.0s, the one I use a 14500 in doesn't have that light (I was initially confused when people talked about it) and in the one I recently got on here for a bargain I just use a NiMH AA. There's also a very, very slight difference in their build that I can't explain, like the ano process was changed and the button material is different.
I do the partial turn method with my other lights though (GT Nano, GT Mini, D2) because I rotate through lights so frequently and always want them to be charged when I grab them.
-
@GearedForwards said:
Oh I'm familiar with it, but it's only on the newer versions and when you use 14500s. I have two Tool AA 2.0s, the one I use a 14500 in doesn't have that light (I was initially confused when people talked about it) and in the one I recently got on here for a bargain I just use a NiMH AA. There's also a very, very slight difference in their build that I can't explain, like the ano process was changed and the button material is different.I do the partial turn method with my other lights though (GT Nano, GT Mini, D2) because I rotate through lights so frequently and always want them to be charged when I grab them.
I have yet to try the ‘partial turn’ storage method on my Sofirn lights — which bring me back to my preference of having a visible aux light.
My potential scenario is: If the aux light isn’t ON then it’s possible I need to turn the tail cap prior to use. (If it’s blinking, it’s ‘Locked’, if ‘ON’ low, I can use it, if ‘ON’ high….someone played with them lol). This would be the case EXCEPT for the 10440 Lumintop Frog and Nano.
From what people have tested, I guess a little drain on something larger than a 14500 battery isn’t that bad.
-
@Zephon said:
My potential scenario is: If the aux light isn’t ON then it’s possible I need to turn the tail cap prior to use.The way I run it is to only turn the tailcap to On when it goes in my pocket. I wouldn't need to use it otherwise, and if it's in rotation it gets a charge check at least once a week... more if I've actually used it to any notable degree.
-
“It’s all about the pocket clips”
Here’s my ‘weird’ IF25A — it’s a warranty piece meant to replace a defective one I initially got. Based on how it behaves, it feels like it’s a TS21 with the body of an IF25A. Not that I’m complaining since all 4 emitters are working anyway.
And yes, just like the Swiss Tool, the pocket clip is sold separately.

-
Got mine in recently and have been using it around the house and on night walks, I like it! The shape is great for pocket carry, the battery indicator is informative and pleasing, good light levels and the laser is good distance (though my laser experience is minimal):



-
Awesome. I watched a review shortly after you brought this light to my attention. Laser is nice as its not insane which for me is good.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
