Loaded Pockets Challenge August 2022
-
@comis said:
May I please ask for the maker of the grenade launcher?They were released in 2019. I searched on the US eBay and found none. You may have to look in Japan. If you're unable to find one, let me know, and perhaps we can work something out.
@Alan K. said:
The first picture is the passing of the torch, so to speak, between my Korean Zippo copy and my real Zippo in copper.:like:
Day 24
The Altimeter kindly gifted to me by Aloha rotated in today. For some reason, I notice its presence much more than I do the Fieldmaster. It remains good and sharp, though the electronics likely need some calibration.
[attach id=0 msg=2363685]

-
@comis said:
Thanks, now that you mentioned, I did remember seeing old photos of various forces wearing shorts in different climates. :tu:I would love to get lights that could accommodate 14500 or AA format batteries, or even better, a AAA light that could use the 4.2v lithium if possible.
May I please ask for the maker of the grenade launcher? This looks like fun! :pok:
There are several 14500/AA flashlights available.
As far as AAA/10400, the Mateminco CSF-03 sounds like the flashlight you are looking for. Neal’s Gadgets is where I purchased mine.
MATEMINCO CSF03 SST20 378lm 10440 AAA Battery EDC Penlight Flashlight
MATEMINCO CSF03 SST20 378lm 10440 AAA Battery EDC Penlight Flashlight
Nealsgadgets (www.nealsgadgets.com)
-
Forgot yesterday’s picture
Day 23
No change in carry, so I took a use picture of the Voyageur trimming a couple threads from my sandals.
Day 24
The one Bad thing about the Spirit MXBS is that there is no saw if you are planning on using outdoors. For this reason the Farmer X was swapped in for today’s carry.

-
Day 25

Spirit MX opens a box of small pouch I recently ordered, the cuben fibre ones are so light, they almost felt like air.
-
Powernoodle Day 25

Killing a pizza box. -
-
@powernoodle said:
Powernoodle Day 25
Killing a pizza box.Hope the pizza was good. Domino’s is my goto for national chains, mainly because of their nice deals.
-
Now I'm thinking about pizza.

-
Day 25
A friend asked to borrow my knife today and I had to ask him "which one?" Whereupon I began to empty my pockets while he stood there, amazed as I placed everything on the table in front of him. He said it reminded him of the "Leave your weapons here" scene in Mad Max Beyond Thunderdome, and he threatened to start calling me Max. I'm looking forward to ending this challenge so I can put away at least 3 of these knives.
-
<u>Day 25</u>
Spent most of the day in a training course, today. I ended up with my MiniChamp becoming a fidget toy, but since I couldn't really interrupt the course by taking loads of photos, I thought I'd show you how I carry it instead...
Having seen how wrecked my LM Squirt PS4 has become while clipped to my keys, I really don't like the idea of the MiniChamp celidor scales being similarly brutalised. I don't wear jeans anyway, though a recent post suggested the watch pocket isn't a good place for the MC either. So I keep mine in my wallet.
I have an old PacSafe Walletsafe 50, which is like really old, from back when Heinnie Haynes were still EE33 Tactical Outfitters (about 2006) or something. PacSafe don't make these any more, and haven't done for quite some time. The plasti-rubber branding has dissolved away and the security chain key-ring wore out earlier this year, but everything else is still in working order. It's got two internal slots for cards or folded notes (bills) and a zipped pocket on the outside for coins. The closest product to this, and I have one ready in case the PacSafe dies) is the Chums Surfshorts.
So, in the card section, I have a modified card with elastic loops to hold the MiniChamp, two flash drives and a USB C to Micro adapter. I simply took a spare plastic card, put some stitch holes in it with a SAK awl, and then stitched a 2" wide elastic strip to make loops, a bit like shell holders on shotgun stocks. The loops don't need to be desperately tight as the card itself sits inside the wallet, and simply wrapping the elastic over the item you want to hold results in enough tension once it's stitched on to grip the item snugly. To finish, I simply put a strip of duck tape around the exposed ends, which also helps the card slide in and out easier, although it does stay in the wallet well enough that you can remove whichever item you need without yanking the whole thing out.
OK, enough yabbering Tasky. Just show 'em the bloody thing!!
[attach id=0 msg=2363905]
[attach id=1 msg=2363905]
[attach id=2 msg=2363905]



-
@Alan K. said:
I'm looking forward to ending this challenge so I can put away at least 3 of these knives.The knives aren't what I most want to see out of my pockets. More of that on Day 30...

@Tasky said:
A recent post suggested the watch pocket isn't a good place for the MC either. So I keep mine in my wallet.That's a neat wallet. I'll show my "wallet" tomorrow.
Day 25
The usual rotations today, plus a new addition to the Olight. Much as I like paracord, the suspension clip is a much better means of carry.
[attach id=0 msg=2363937]

-
Day 25
Today I change things up some in the pouch department to try an organizer and separate pouch, instead of a single organizer/pouch combo. This was mainly to try how the carry felt with a larger footprint but less bulk.I knew I was going to have to go into the tourist area where carry is viewed a little stricter (fixed blade viewed questionably), so I started out with the below carry plus keys (with Rambler and light), Shirogorov knife and mini breacher bar

But then I remembered my one tool card has a knife edge, and figured that should count as a fixed blade considering it doesn’t fold, so I changed the carry to the below (keys not shown.

-
Day 21

Today's rotation was just the knife, I tend to linger on SAKs and what not when I rotate them, but knives I rotate freely. This is the 'Gnome' a knife design never actually made by its designer so was made by some Chinese OEM instead. I really like the design, I don't like that the lock failed on me and cut my knuckle...
-
Day 22
A much more pleasant knife day, my modded ZT 0801 (polished flats, ano'd valleys). A picture in use (I think the folks at Papa Johns could use a knife drive the amount of uncut stuff they send...) and a picture with another hog, this one the domestic variety.



-
@GearedForwards said:
Day 21
Today's rotation was just the knife, I tend to linger on SAKs and what not when I rotate them, but knives I rotate freely. This is the 'Gnome' a knife design never actually made by its designer so was made by some Chinese OEM instead. I really like the design, I don't like that the lock failed on me and cut my knuckle...
Ouch. Cool looking knife, but a lock you can’t trust is no good.
-
@GearedForwards said:
A picture with another hog, this one the domestic variety.
-
Day 26


Spirit MX unboxed a new fixed blade from fiddleback forge, this is made by WA Surl.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:ahhh
