Corkscrew or Phillips SD (VOTE)
-
more uses for a corkscrew and there is already screwdrivers in there. Watching Felix Immler or Nikguyver on Youtube opens your eyes to a lot of uses for the corkscrew.
-
@Kraken said:
Corkscrew all day for me. I've tried the back side Phillips driver carrying a Super Tinker and a Deluxe Tinker and the driver just wasn't applicable in most of the situations I found the need for it. I now carry an Explorer and don't think I'll ever be able to go with anything else. Plus, I've had a need for the corkscrew on a few occasions.The Explorer really hits a sweet spot in a lot of ways. It's a shame, though, that you can't get the inline Phillips/mag glass layer on a 2 or 3 layer knife these days without going the custom route or spending a small fortune on eBay.
-
Corkscrew as it does enable you to to add additional tools and features to your SAK such as the mini tools or fire ant set
[attach id=0 msg=2364114]
[attach id=1 msg=2364114]


-
I’m with zoidberg. No back tools, at least on victorinox knives.
On victorinox knives, if the layer has back tools, the back springs aren’t flush with the liners, which is ugly and not very comfortable. Wenger, and I assume the delemont Vics, have flush springs with back tools which is much better, though I still prefer the more streamlined look and feel with no tools.
-
I've found that screws that require a proper Phillips instead of the can opener are usually in places where there's not enough room to use the backside driver effectively. :-\
-
I have SAKs with both tools & others with no back tools, & I like them all! :)
I voted corkscrew though as I'd rather have it close at hand than not at all, if it makes any sense. It is a more versatile tool than the Phillips. I like the Phillips for handling comfort but Delemont Evo scales make the CS less obtrusive if it's problem.
-
Corkscrew for me - that mini screwdriver is so useful for spectacle maintenance - saved me many a time!
-
@G-Dizzle said:
The corkscrew is way better in my opinion. Backside phillips is awkward to use and only has one use. Corkscrew has a lot of uses. Plus, the can opener is a pretty good phillips driver.I was going to make this exact comment. The can opener is fine for a quick fix. The backside Phillips is a little limited because of placement. I edc the Deluxe Tinker, but I've never needed the Phillips, because I also edc a mini ratchet. I'd rather have the corkscrew.
-
The phillips functions better as a tool. The corkscrew functions better as a tool carrier.
In my younger days, when I still drank wine, the SAK corkscrew was all I had to open them. I have no use for a corkscrew now, so it's good for mini drivers, tinder, and keep the pin in place in the scale.
I've used the phillips to get to screws that are set deeply enough that can opener phillips couldn't reach them.
I'll take either over no back tools. If I wanted a knife with fewer tools, I wouldn't be carrying a SAK. ;)
-
No doubt, corkscrew.

-
@marlowe221 said:
I know this topic comes up from time to time, but I think it's a good idea to revisit stuff like this because, as time goes on, people change their minds. And that's OK!For example, I would have said "corkscrew, of course!" if you'd asked me a week or two ago. But I'll be darned - for some reason I've been reaching for Tinkers and Tinker cousins a lot lately. And that back Phillips has come in handy on one more than one occasion too!
So, I'm not voting yet. I'm thinking...

This is so true, I have been all over the map on the corkscrew vs Philips but I have decided on the Recruit (no backside tools). Who knows I could change my mind again, always good to revisit the options.
-
I voted Phillips because I use that more than I use a CS!
However, I would prefer an 93mm Alox with an in-line option (4 layers max)
Basically a PX with a Phillips or an FX sans saw (either way it MUST have scissors) 2D is do-able awlso

-
I voted corkscrew, but honestly, I no longer have a strong preference either way. I like the Philips simply because it provides a more comfortable resting place for my thumb, and it also holds the straight pin in place even if the pin is loose in the slot. I like the corkscrew because it is great for untangling knots and holds the mini driver.
The fact is that there are simply more models with the corkscrew; the current Philips models stop at the Fieldmaster and Deluxe Tinker. So I had to get used to the corkscrew in order to expand beyond the Tinker and its relatives. My favorite model, the Explorer, has both the corkscrew and an inline Philips driver, which makes this question moot.
-
Matters not to me. Each has its purpose, and I have examples of each that see carry time.
-
Years ago I would have chosen the phillips but I am more a corkscrew fella these days. While I know the can opener can be used as a phillips I never or rarely do. I like the ability to carry my mini driver in my corkscrew.
-
I forgot to add that the corkscrew is great for opening hard to open jars, I tip I learned here - definitely a use I wouldn’t have thought of on my own!

-
How does that work? Does it wriggle under the lip to release the pressure?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

