What Is Your Latest Knife?
-
Out for Delivery !


-
Waynorth Cutlery Lambsfoot
[attach id=1 msg=2371451]
[attach id=2 msg=2371451]
[attach id=0 msg=2371451]



-
That's a beauty Steve.

-
Waynorth Cutlery Lambsfoot
[attach id=1 msg=2371451]
[attach id=2 msg=2371451]
[attach id=0 msg=2371451]
A very hard to find model! Way to go, Steve.
I had at first thought Way north Cutlery was a new manufacture of knives, then researching it was learned it is a GEC produced knife like Northfield.
I was and still am mesmerized by the differing designs of Sheep foot and Lamb foot blades. If I have interrupted my studies correctly, the Lamb foot (A Sheffield design) tapers the blade height from tang to tip slightly, making the blade height less before the round to the tip. A Sheepfoot, is the same height from tang to the tip round.
That is a lovely shaped blade, unique handle and a GREAT catch!
-
Yes LC, that's my understanding of a lamb vs sheepsfoot. Unsurprisingly a Ramsfoot flairs towards the tip.
-
-
For the October Fixie Challenge, I thought it was time to locate an Eldridge, by Morakniv.
Small enough for pocket and light enough tho thick for neck carry (once I purchase new break away chain).
Found one problem, no index for blade orientation when in the sheath!!!
For now I added a additional grove indentation to the top of the handle for touch feel and colored the bottom groove present red for visible alert.
Sharp, and is Stainless Steel (?), awl other Moras I have are Carbon Steel.
[attach id=0 msg=2371602]
-
@LoopCutter said:
Flairs, how? Blade up toward the tip, down below the blade like a pruner? Not heard of Ramsfoot until I read the Lambfoot article I found, and not had time to research😉
TIA 🫡Sorry, "widens" might be a better choice of word. So edge to spine is narrowest near the pivot end and then gently widens as it goes towards the tip. The exact reverse of the Lamb.
-
I have seen pictures of that pattern!

It made no sense, until you painted me a word picture!
-
@LoopCutter said:
A very hard to find model! Way to go, Steve.I had at first thought Way north Cutlery was a new manufacture of knives, then researching it was learned it is a GEC produced knife like Northfield.
I was and still am mesmerized by the differing designs of Sheep foot and Lamb foot blades. If I have interrupted my studies correctly, the Lamb foot (A Sheffield design) tapers the blade height from tang to tip slightly, making the blade height less before the round to the tip. A Sheepfoot, is the same height from tang to the tip round.
That is a lovely shaped blade, unique handle and a GREAT catch!
Thanks LC, I got one when they first came out and then foolishly sold it before I really appreciated the pattern. I've been trying to reacquire one ever since without paying an arm and a leg for one. I was able to work out a trade for this one that was reasonable.
-
@LoopCutter said:
Flairs, how? Blade up toward the tip, down below the blade like a pruner? Not heard of Ramsfoot until I read the Lambfoot article I found, and not had time to research😉
TIA 🫡A picture is worth.......
LF on top Ramsfoot below

-
Nothing fancy, stopped at a nearby farm store to get bird food. Checked out sporting goods section too and found these two with prices not to be ignored -
[attach id=0 msg=2371732]Yes, I am a sucker for marked down items, price written on package match pegged price, but not cash register system. Told new Sunday price and was quickly adjusted.
I did not have an orange 110 SS and I like the 684, a great fix blade with very similar design to to a 113 with same 420HC steel. In fact fits perfectly in a 113 Sheath😁

-
Nice one Noah !

-
I have been looking for one of these Dog Head KA-BAR-LO's for a long time, they don't come up too often. I lucked into an estate seller on Ebay that had two of them. I grabbed both, I'll keep the best one and sell the other. It might be a hard choice

Should have them by mid week



-
Cool photo, Spartan! -
@LoopCutter said:
Nothing fancy, stopped at a nearby farm store to get bird food. Checked out sporting goods section too and found these two with prices not to be ignored -
[attach id=0 msg=2371732]Yes, I am a sucker for marked down items, price written on package match pegged price, but not cash register system. Told new Sunday price and was quickly adjusted.
I did not have an orange 110 SS and I like the 684, a great fix blade with very similar design to to a 113 with same 420HC steel. In fact fits perfectly in a 113 Sheath😁

-
My findings during the Ranger Challenge indicated that I really should try the first two generations of Bucklite due to the less-aggressive handle texture and finger grooves. The handle material feels more solid, the texture is just enough to be grippy (and does NOT tear into my hand), and all around, you can tell this wasn't an "el cheapo" 112 like pretty much everything from the 442 on was. The knife fits my hand like a glove, not just plain awkward like the 112LT and Slim Ranger.
Despite the better build, it only gains two-tenths of an ounce, so pretty much negligible difference between new and old in terms of weight. This will be my go-to 112 from now on. I am now beginning to wonder if I should've bought the second-gen 422 at the same time.

-
Nice cody I’m going to have to take a look
Personally the 112LT is comfortable for me and I just managed to get one so pleased about that
-
,

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

