Show off your Sak mod's!
-
@kottskrapa said:
Only if you get the chance, taking it apart or get any other good opportunitiesHere is what it took to make the mod. I wasn't willing to take it apart so I did my best with what I had on hand.

-
@trouthunter said:
Here is what it took to make the mod. I wasn't willing to take it apart so I did my best with what I had on hand.Thank you for posting this. Do you think there’d be any issue with using the pivot point on the standard 91mm knife as a template instead of the bottle/can opener? Maybe there isn’t enough material to start with?
-
@Salmonidae2 said:
Thank you for posting this. Do you think there’d be any issue with using the pivot point on the standard 91mm knife as a template instead of the bottle/can opener? Maybe there isn’t enough material to start with?I honestly don't know. These were from a 91mm, so it is plausible. I have also used a thick piece of aluminum in the past to accomplish the same task.
-
@trouthunter said:
Here is what it took to make the mod. I wasn't willing to take it apart so I did my best with what I had on hand.Thanks! This is now on my want to do list
-
Gotta get me a Swiss Tech scalpal!
Slightly less technical but I made something similar to this previously and promptly lost it. It’s a openerless compact! A bit weird I know but I was surprisingly attached to it hence the new improved plus scale version. Had to use a blade I had been messing about profiling as it was all I had left but actually quite like it and it retains the original nail nick too!


-
Hunter 111
https://youtu.be/4xwy9vcVNAI -
Nothing unusual in this neighborhood, but a first for me: the Yellowman


-
-
@ComboTool said:
And since I'm in 3-layer mood, here's a 91mm clone of Syph's great invention of the driver layer.Super like this one, any additional work to get the phillips in place of the can opener or is it just a drop-in?
-
@Hzza said:
Super like this one, any additional work to get the phillips in place of the can opener or is it just a drop-in?The Phillips tang has to be reworked to match the spring (I used a blade layer spring). Since the Phillips is a bit wider than the spring (which itself is wider than the bottle opener) a few washers/spacers are needed in various places. Last, I used a backspring awl (again with washers to adjust the width) to maintain spring tension.
-
That is a great mod

-
Hello, new here and trying to post. I am new to modding, this is one of my 2 layers. Small blade and saw on one layer and an integrated pocket clip. I am in the process of making some leather scales for it. [attach id=0 msg=2373209]

-
Additional view [attach id=0 msg=2373210] [attach id=1 msg=2373210]


-
I don't visit here as often as I should :o
Some really great mods.

-
@Enginears said:
Hello, new here and trying to post. I am new to modding, this is one of my 2 layers. Small blade and saw on one layer and an integrated pocket clip. I am in the process of making some leather scales for it. [attach id=0 msg=2373209]Pretty nice! Keep us posted!

-
New to this site and modding. I carried a swiss champ for a while, but it was too bulky. Carried a rambler for a bit, but too small. I made an 84mm blade less 3 layer. Standard opener layer, but I ground an edge on the inside of the can opener. I only used my rambler blade for opening boxes and packages, so this should take care of that need. Cut down the file from my champ to put in place of the magnifying glass. Modded the scissors to fit on the 84 frame. Enjoyed having a back up pen on the champ so I made a spot on the scale to hold it. I want to make brass or alox scales next but will first carry it awhile and make sure it's what I want.
[attach id=0 msg=2374995]
[attach id=1 msg=2374995]
[attach id=2 msg=2374995]
[attach id=3 msg=2374995]



-
Wow Blantz, I love it! Looks very compact and useful. I have done a few can openers with inner blades like that and find them very useful. They cut down file is impressive as well.
-
Thanks Enginears! It's a lot of work to try and do the modifications you want, but really rewarding when its all done and in your hands. I'm glad I found this site. It has given me a lot of ideas and inspiration as to what can be done. I also made the toothpick into a small screwdriver and made a spot for a small pin. Its weird how much fun I had doing small, time consuming changes to this tool. Thank you to all the people who have posted tips and tricks over the years.
[attach id=0 msg=2375664] [attach id=1 msg=2375664] [attach id=2 msg=2375664]



-
Someone else posted this idea here. I just went ahead and tried it. Works great!
To avoid the can opener slipping when you're using it, cut a small groove in the lower tip, so it fits the rim of the can.
I used just a triangular file to do it. Put two fingers on the sides of the lower tip, as guides, and gently run the edge of the file down the middle, to create the groove.
Keep doing this without applying much force, so as not to have the file slip. After a while, test it on a can to see if it's deep enough. Keep repeating until it works.





Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



