The October 2022 EDC Fixed Blade Challenge
-
I forgot to include a picture of my very small assortment of fix blade knives.[attach id=0 msg=2371936]

-
@LoopCutter said:
Day 2 -A packaged arrived on day 1, could do a challenge without one new knife.
A Eldris light duty arrived, via Amazon.
Straight away I added a lanyard to the knife, and a loop to the sheath. Fiddled with it and determined there is no indexing to determine blade orientation 🙄. For visible, I used a red ink marker to blade edge down of handle, and then added a notch to top side of handle. Hopefully I will not cut my self…
[attach id=0 msg=2371737]And, then I made a mod to my Izula, for my pocket carry deployment. I measured out about 30” on paracord, and made a loop, measuring about 24” long. Slipped one end thru the sheath hole, and the other on my belt. Inserting the sheath tip first into my pocket it can reach the pockets bottom, with knife handle up. When needed I only need to extract the knife by the handle, the correct stops the sheath and knife is usable with one hand action. The loop cord can be utilized on the Eldris as well. 😉
[attach id=1 msg=2371737]Then while visiting farm store I find…
[attach id=2 msg=2371737]
Two bargains that I could not resist.So it starts🤪
Just gotta luv challenges.
@Sos24 said:
The Eldris has had me curious. It looks nice and comfortable to use, but that it might be fat for pocket or conceal carry.Day 3

I had the Eldris for a while now, and thought I should bring it out for the photo op today. Next to it is a Mora "Rookie and a modded Mora No. 2.
I remembered when I planned to get the Eldris as it was being released, I had high hopes for it. Based on my of my Mora knives experiences, somehow I was hoping it would be a light weight knife with great utility and a full grip. But in reality, I felt the features on this knife are conflicting, and can't really understand the concept behind the design.
The handle is contoured, but the grip is quite short. I have a mid-large size hand(Mechanix glove), but this is only a 3.5 finger grip for me. The blade is really short(2.2), but the bulky handle makes the real usable cutting edge felt even shorter. The overall length is short, but since the fat handle and sheath is quite girthy, it's hard to horizontal carry this like most small, lightweight fixie. The blade height is rather top, despite the short blade length, which makes it hard to maneuver when craving wood.
All in all, I never fully understand the knife and warm up to it. If for wood carving, there is Mora 120 wood craving knife(highly recommend this), which has longer handle, awesome geometry, lighter and slimmer in profile. If we just want a 'small' knife, the Rookie could have fitted the bill(with a little modding) or even the Mora No.1 would have done it.
-
@LoopCutter said:
Day 3 -Front pocket carry of the IZula worked Ozk for me, but not as easy to extract when need as I hoped as it wanted to lay flat in the pocket, actually more diagonally and jam into the seams. After thinking about I made a small change. I added a line of paracord across the top two screw holes, and ran the belt loop strap thru it hope it remains upright.
[attach id=0 msg=2371935]
[attach id=1 msg=2371935]
I can use the same sheath for my Izula II when it is her turn.Nice! I think I have the exact same handle on my Izula from Knife Connection, the longer handle really does transform the knife and make it more usable.

-
Yes, found at Knife Connection, he apparently makes these or has them done for him. My Izula had become unusable for to the shorter handle and even with paracord wrap I had no purchase power with my numb fingers due to an electrical accident s few years ago.
Makes it the same length as the II.
I wished he had the Orange pattern but only for the II. Happy with the red. 😉 -

I had the Eldris for a while now, and thought I should bring it out for the photo op today. Next to it is a Mora "Rookie and a modded Mora No. 2.
I remembered when I planned to get the Eldris as it was being released, I had high hopes for it. Based on my of my Mora knives experiences, somehow I was hoping it would be a light weight knife with great utility and a full grip. But in reality, I felt the features on this knife are conflicting, and can't really understand the concept behind the design.
The handle is contoured, but the grip is quite short. I have a mid-large size hand(Mechanix glove), but this is only a 3.5 finger grip for me. The blade is really short(2.2), but the bulky handle makes the real usable cutting edge felt even shorter. The overall length is short, but since the fat handle and sheath is quite girthy, it's hard to horizontal carry this like most small, lightweight fixie. The blade height is rather top, despite the short blade length, which makes it hard to maneuver when craving wood.
All in all, I never fully understand the knife and warm up to it. If for wood carving, there is Mora 120 wood craving knife(highly recommend this), which has longer handle, awesome geometry, lighter and slimmer in profile. If we just want a 'small' knife, the Rookie could have fitted the bill(with a little modding) or even the Mora No.1 would have done it.
Thanks for your thoughts. They seem on par with what I was thinking would be the case and why I not purchased one yet.
-
Day 3: Ran errands, decided I'd just throw the Xtra Edge in my shirt pocket; as it's probably the most inconspicuous fixed blade I have that's still comfortable to use.
When I got home, I had a package to open.
My experiences during last month's Ranger challenge led to the conclusion I ought to try the first and second-generation Bucklite Rangers (422) as I wasn't a fan of the modern lightweight Ranger and Hunter handles. I already had the two-blade Selector and I loved its handle, so I decided to see how it would be on a Ranger. And I have to admit, I really like the feel of it. The finger grooves fit my hand perfectly.
Second-gen should be here in a few days.....

-

Tied up the remnants of a bale of straw used for mulching the veggie beds. The new puppy loves to pull straw out of the bale and chew it and spread it around. Mrs Nix was not amused and I was directed to remedy the situation. A bit of jute and a sharp knife and the problem was solved.

The BLJ works much like a very sturdy utility knife. Surprisingly efficient. The edge is a bit obtuse, so I'll need to use it for some food prep to get a better idea of its versatility.

-
Day3
ProS pulling kitchen duty
-
Day 4
Doing the Ranger challenge last month and already having a 110LT, decided I preferred the handles on the LT to the slim. As they stopped making them a few years ago took a little tracking down but here we go


-
@Echotech said:
When I go into the bush I believe that is a good reason whether for bush craft, camping, food prep or just safety.
@LoopCutter said:
I forgot to include a picture of my very small assortment of fix blade knives.Compared to mine, that's a huge collection!
Nice work, y'awl. I'm liking the variety!

-
Day 03

Cold Steel Spike today, it tackled some food including opening a packet of frozen chicken nuggets, but the mail call opening was more exciting. Olight packages everything individually, so there is a lot of cutting needed!

-
Day 03
I used the Bradford Guardian 3.5 to cut some shoots growing out of a Gumbo Limbo stump. I cut down the tree 5 years ago but it just won't die.
-
-
Day 3
The Essential opened some mail to include the White River ATK.

I am really looking forward to using the ATK.
Initial impressions of the ATK are:
- The blade looks longer than expected. On paper it is the same length as my Vermin, yet in reality is longer
- Because of overall length I was expecting to be able to have a full grip but because of the shape it is really only a three figure grip but comfortable.
- It is real sharp right out of box
- Because of the way it clips into the sheath (using first hole on sheath), I don’t think it could be wrapped in paracord and still fit in sheath
- The profile including sheath is really flat so it can disappear as neck knife or in pocket
Here is a picture of it compared to the Vermin and Essential (almost identical in size to Izula).

I was going to take a picture comparing to my Izula, but it appears that one has temporarily been misplaced. I believe it is in my car and I wasn’t going to check with the storms. -
Tied up the remnants of a bale of straw used for mulching the veggie beds. The new puppy loves to pull straw out of the bale and chew it and spread it around. Mrs Nix was not amused and I was directed to remedy the situation. A bit of jute and a sharp knife and the problem was solved.

The BLJ works much like a very sturdy utility knife. Surprisingly efficient. The edge is a bit obtuse, so I'll need to use it for some food prep to get a better idea of its versatility.

Good seeing it in action 
-
@Alan K. said:
Day 03
I used the Bradford Guardian 3.5 to cut some shoots growing out of a Gumbo Limbo stump. I cut down the tree 5 years ago but it just won't die.Nice Guardian. I have a holly bush like that. I cut all of it down to ground level and it grows back.
-
2022 EDC Fixed Blade Challenge
Schrade 152
Day 3Opened a few boxes at work.

-
Day 4:
MicroHawk as part of office gear:


Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


