The October 2022 EDC Fixed Blade Challenge
-
Tied up the remnants of a bale of straw used for mulching the veggie beds. The new puppy loves to pull straw out of the bale and chew it and spread it around. Mrs Nix was not amused and I was directed to remedy the situation. A bit of jute and a sharp knife and the problem was solved.

The BLJ works much like a very sturdy utility knife. Surprisingly efficient. The edge is a bit obtuse, so I'll need to use it for some food prep to get a better idea of its versatility.

Good seeing it in action 
-
@Alan K. said:
Day 03
I used the Bradford Guardian 3.5 to cut some shoots growing out of a Gumbo Limbo stump. I cut down the tree 5 years ago but it just won't die.Nice Guardian. I have a holly bush like that. I cut all of it down to ground level and it grows back.
-
2022 EDC Fixed Blade Challenge
Schrade 152
Day 3Opened a few boxes at work.

-
Day 4:
MicroHawk as part of office gear:


Sent from my iPhone using Tapatalk
-
@LoopCutter said:
Yes, found at Knife Connection, he apparently makes these or has them done for him. My Izula had become unusable for to the shorter handle and even with paracord wrap I had no purchase power with my numb fingers due to an electrical accident s few years ago.Makes it the same length as the II.
I wished he had the Orange pattern but only for the II. Happy with the red. 😉I just checked earlier in the day, and turns out I do have the same handle for the BK14, but not my Izula II.
But it too really does breathe new life into the BK14, which essentially is the same length as the original Izula. 
@GearedForwards said:
Day 03
Cold Steel Spike today, it tackled some food including opening a packet of frozen chicken nuggets, but the mail call opening was more exciting. Olight packages everything individually, so there is a lot of cutting needed!

Good use, and that patch from olight looks cool!

@Sos24 said:
Day 3
The Essential opened some mail to include the White River ATK.

I am really looking forward to using the ATK.
Initial impressions of the ATK are:
- The blade looks longer than expected. On paper it is the same length as my Vermin, yet in reality is longer
- Because of overall length I was expecting to be able to have a full grip but because of the shape it is really only a three figure grip but comfortable.
- It is real sharp right out of box
- Because of the way it clips into the sheath (using first hole on sheath), I don’t think it could be wrapped in paracord and still fit in sheath
- The profile including sheath is really flat so it can disappear as neck knife or in pocket
Here is a picture of it compared to the Vermin and Essential (almost identical in size to Izula).

I was going to take a picture comparing to my Izula, but it appears that one has temporarily been misplaced. I believe it is in my car and I wasn’t going to check with the storms.I heard much about the White river knives. Just reading the initial impression, I am thinking if it is possible to file down the bump at the end of the handle(finger side) and give it a big fob like the Essential, maybe it would even serve you better?

As a knife enthusiast, I often think whether I should adapt myself to the knife, or the other way around...and what is the balance between the two. But over the years, I have formulated some criteria for myself, and tried to stay within that specification to avoid disappointment.
-
Day 4

Bought out the BK14 with an optional handle to play. Although it is fully skeletonized, the overall weight is still quite noticeable with the handle. But as a 'small' knife, it is really awesome.
-
Day 4: Mora Basic 125th again.
Not long after I started wearing bib overalls (as one of only about 2-3 different brands and types of pants I can wear all day without pulling them up constantly), I noticed that the "button" slot on most Mora knives fits right over the side fastener on most Liberty overalls. I thought that the button was only compatible with pants traditionally worn by those in Europe--guess I was wrong.
[img]https://i.postimg.cc/rFHtdysf/IMG-20221004-102342.jpg[/img
-
Day 3
i forgot to take a pic,my missus asked me to slice up an old towel for rags.
pic is of the towel,i started the cut,and tore it.<a href="https://flic.kr/p/2nQJsJV" target="_blank" rel="noopener noreferrer"><img src="https://live.staticflickr.com/65535/52403661137_b41286082b.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>20221004_164156 by Humayd a r Mahomedy, on Flickr
-
Day 4 -
I selected a small hunter to be my sharp tool today.
I received this knife via a cigar box my mom gave me that include some items from my dad’s hunting gear. A Black and Silver Stacked handle Western small hunter, (I gave to my brother), my grandfather’s hunter, and h th his smaller SABRE, Thompson made in Sheffield England. I thought a novelty knife from a tourist attraction, BUT NO, it is a cutter. Someone, I suspect my dad attempted to sharpen, he was terrible sharpening knives!
I worked it against my WorkSharp, Field Sharpener, and put a hair splitting edge onto the blade. The sheath is decent, and could allow for neck carry, better than belt.Hope to get working pictures later. For now, pictures with detail.
[attach id=0 msg=2372141]
[attach id=1 msg=2372141]
[attach id=2 msg=2372141]



-
@comis said:
I just checked earlier in the day, and turns out I do have the same handle for the BK14, but not my Izula II.
But it too really does breathe new life into the BK14, which essentially is the same length as the original Izula. 
Good use, and that patch from olight looks cool!

I heard much about the White river knives. Just reading the initial impression, I am thinking if it is possible to file down the bump at the end of the handle(finger side) and give it a big fob like the Essential, maybe it would even serve you better?

As a knife enthusiast, I often think whether I should adapt myself to the knife, or the other way around...and what is the balance between the two. But over the years, I have formulated some criteria for myself, and tried to stay within that specification to avoid disappointment.
I have since put a fob on it, which also helps with removing from sheath. The filing down the bump is a good idea that I may try at some point. When I really choke up on the knife, the bump hits mid-pinky so filing down would give me almost a full grip.
-
@LoopCutter said:
Day 4 -I selected a small hunter to be my sharp tool today.
I received this knife via a cigar box my mom gave me that include some items from my dad’s hunting gear. A Black and Silver Stacked handle Western small hunter, (I gave to my brother), my grandfather’s hunter, and h th his smaller SABRE, Thompson made in Sheffield England. I thought a novelty knife from a tourist attraction, BUT NO, it is a cutter. Someone, I suspect my dad attempted to sharpen, he was terrible sharpening knives!
I worked it against my WorkSharp, Field Sharpener, and put a hair splitting edge onto the blade. The sheath is decent, and could allow for neck carry, better than belt.Hope to get working pictures later. For now, pictures with detail.
[attach id=0 msg=2372141]
[attach id=1 msg=2372141]
[attach id=2 msg=2372141]Beautiful knife
-
Day 4 - additional detail!
Maybe a member here can provide more info…I can not see my dad or grandfather having bought, both were no nonsense types, possibly my great Uncle! He traveled, had taste for nice things. Plus WWII veteran North Africa. He could have gifted to my Grandfather as his Nick name was Pinky, for being much shorter than others in family.
[attach id=0 msg=2372146]
[attach id=1 msg=2372146][attach id=2 msg=2372146]



-
Lovely knife LC with an interesting history from the sounds of it

-
Thinking about grilling....mabey
Still trying to get my pics to not be a gigantic wallpaper size when posting from this phone.

-
@Alan K. said:
Day 03
I cut down the tree 5 years ago but it just won't die.I awlso have a few trees on my property (and the neighbors' properties) that have proved very resilient.
@LoopCutter said:
Maybe a member here can provide more info…I wouldn't be that guy, but man alive, that's a good-looking knife!

-

No uses this fine day.
Wait....I did use the BLJ to cut some packages of sausage apart. But that was long ago (this morning) and I didn't have the camera with me...... :-\
-
2022 EDC Fixed Blade Challenge
Schrade 152
Day 4No uses today
.jpg)
-
Day 04
I had a meeting today so I needed something more discreet than the Guardian 3.5 which causes an odd protrusion under my shirt no matter where I position it, so, I carried this oddly shaped knife. I originally bought it from BudK as a cheap alternative to a KA-BAR TDI Investigator, just to see if I'd like carrying something like that. It comes with the Kydex sheath. It is very sharp and it does the job when I need something small and unobtrusive. These are still available from BudK. https://www.budk.com/SOA-Vengeance-Concealable-Neck-Fixed-Blade-Knife-with-Molded-Kydex-Sheath-G10-Handle-38246
-
Day 4: I had the AG Russell Pocket Scalpel around my neck most of the day.
I placed my Mora Basic 511 on my work overalls. The bottom side button on Liberty bib overalls seem to fit the buttonhole on the sheath really well, and it places the knife in an ideal spot.

I also tested my Antonini SOS MAMBA RQE BLACK rescue fixed blade. It comes with a "jumpable" MOLLE sheaht called the "TOP EGG" made by an Italian holster maker, but I accidentally cut one of the straps that holds the blade in with the seatbelt cutter. Thus, I ended up using a leather sheath designed for a skinning knife. BAD IDEA. The TOP EGG is designed to sit low enough to keep from jabbing yourself in the side with the glass breaker pommel.
It's made in Maniago Italy, and is filed under "Cody, why the heck did you buy this thing?" Oh wait, it was cheap. Most of my Antoninis are small, basic pocketknives I use working around the farm. This is a whole different animal.
I think the TOP EGG ended up in the outbuilding when cutting up boxes. I'll need to find it. I guess any holster maker could fix the cut nylon strap.
This thing is heavy enough to chop through thick wood but needs a sharpening. I also think Antonini should've used carbon steel instead of 440A. The only premium steels they use in their knives aren't even their knives--the SOS RESET line is made by LionSteel for Antonini. This would really benefit from a higher end, high-toughness steel like D2 or M4. Heck, basic 1095 is enough (and Antonini uses C70, close to 1075 in many of their folders--which itself is perfect, and would be less likely to rust coated black like mine).
It is basically a sharpened prybar--thick, heavy and bulky.
BLADE: 105 mm - 4,13''
TOTAL: 235 mm - 9,25''
WEIGHT: 195 g - 6,88 oz.I think I got it on sale for around $20 when the US distributor for Antonini retired. These things are almost $200 at MSRP, nad for that, I'd go with a Becker.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

