30 Day Wave Challenge
-
@WillieTheJanitor said:
Oh... and I missed the ruler
It's easy for me to miss the ruler, being that it's hidden when the Wave is closed.
@Grand_Banana said:
Cutting off some slices of homemade candy apples for lunch treats.
Great posts, as usual!

Day 4
Installed a dummy light switch and its cover plate.
[attach id=0 msg=2372186]
[attach id=1 msg=2372186]
.jpg)
.jpg)
-
Excellent photos today, everyone

-
Likewise, and looking forward to seeing some more paracord with those end locks!

-
Great day 4 pics all!
-
Imstalling a transformer for a plasma cutter this morning. This is a 2nd gen Wave (or New Wave) with a cap crimper plier head from a Charge ALX:

-
Day 5 of 30
One of the coolest Waves I own 8)


-
-
Day 5 of 30: the Wave is the ultimate dad MT
Starting today moving a crib before work. Didn’t really need the 711L ratchet, but it’s a wave challenge so why not. I also tend to use 1/4 inch bits with it but thought I’d give it a try with the flat bits: they do not hold as well.
[attach id=0 msg=2372277] [attach id=1 msg=2372277]Also modified an outlet cover to allow room for a power strip cord and installed that. [attach id=2 msg=2372277]
And, tightened the baby gate
[attach id=3 msg=2372277]



-
@Adam5 said:
Imstalling a transformer for a plasma cutter this morning. This is a 2nd gen Wave (or New Wave) with a cap crimper plier head from a Charge ALX:
I saw "Buck" and got excited
Nice pic! 
One of the coolest Waves I own 8)

Ooooo.... I love that one!

@Grand_Banana said:
Day 5 of 30: the Wave is the ultimate dad MTStarting today moving a crib before work. Didn’t really need the 711L ratchet, but it’s a wave challenge so why not. I also tend to use 1/4 inch bits with it but thought I’d give it a try with the flat bits: they do not hold as well.
[attach id=0 msg=2372277] [attach id=1 msg=2372277]Also modified an outlet cover to allow room for a power strip cord and installed that. [attach id=2 msg=2372277]
And, tightened the baby gate
[attach id=3 msg=2372277]Great pics! I had a 711L ratchet in my Amazon shopping cart for months, but I kept balking at actually purchasing it because it looks like sideways force on the Leatherman bit holder might break it easily. How much force are you able to apply to the ratchet when it's connected to a bit holder?
-
The most torque I’ve applied the 711L was installing an outlet box. I used the wave as a drill as then to drive the screw. The bit driver and the pliers flexed when I used the leatherman ratchet on the screw as it was nearly all the way in, but the 711L and bit driver held up without any noticeable flex. It’s definitely not built for much more torque than a stubborn wood screw.
-
@Grand_Banana said:
The most torque I’ve applied the 711L was installing an outlet box. I used the wave as a drill and then to drive the screw. The bit driver and the pliers flexed when I used the leatherman ratchet on the screw as it was nearly all the way in, but the 711L and bit driver held up without any noticeable flex. It’s definitely not built for much more torque than a stubborn wood screw. -
Somehow I quoted myself!

-
A lot of great uses today!

That Wave looks amazing indeed, Poncho
Don't worry GB, I just did the same in another thread. Also, I really like your 711L. Thanks for the insight

-
Day 5
Wednesday and end of shift. No proper use today, but the Wave accompanied me for some station maintenance. :D

-
Nice pic!

-
Day 5
I just loosened the screw that made my blade too tight, and now it's almost perfect. Right now it just slightly tighter than I like, but it's about the same tightness as all of my new Leathermans... and all of those loosen up perfectly after a little use. I didn't add fresh loctite - I'm hoping the old stuff holds again after the metal cools.
Question - Does anyone know of small and low-profile 1/4" ratchet or wrench? The ones I have are small, but the length of the bit makes handling 2 ratchets and a multitool at the same time difficult. It would be much easier if one would sit flush with the multitool so I could hold both in one hand.

-
Great uses lads :ahhh
Day 5 of 30
Meet pliers


-
Thanks Rich, likewise! Glad you got your Wave sorted

Nice one Willie :D
-
I just loosened the screw that made my blade too tight, and now it's almost perfect. Right now it just slightly tighter than I like, but it's about the same tightness as all of my new Leathermans... and all of those loosen up perfectly after a little use. I didn't add fresh loctite - I'm hoping the old stuff holds again after the metal cools.
Question - Does anyone know of small and low-profile 1/4" ratchet or wrench? The ones I have are small, but the length of the bit makes handling 2 ratchets and a multitool at the same time difficult. It would be much easier if one would sit flush with the multitool so I could hold both in one hand.

Yeah trying to hold the wave and ratchets all in the hand is tricky. I ended up putting mine in a benchtop vise to hold.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login