30 Day Wave Challenge
-
Day 5
Wednesday and end of shift. No proper use today, but the Wave accompanied me for some station maintenance. :D

-
Nice pic!

-
Day 5
I just loosened the screw that made my blade too tight, and now it's almost perfect. Right now it just slightly tighter than I like, but it's about the same tightness as all of my new Leathermans... and all of those loosen up perfectly after a little use. I didn't add fresh loctite - I'm hoping the old stuff holds again after the metal cools.
Question - Does anyone know of small and low-profile 1/4" ratchet or wrench? The ones I have are small, but the length of the bit makes handling 2 ratchets and a multitool at the same time difficult. It would be much easier if one would sit flush with the multitool so I could hold both in one hand.

-
Great uses lads :ahhh
Day 5 of 30
Meet pliers


-
Thanks Rich, likewise! Glad you got your Wave sorted

Nice one Willie :D
-
I just loosened the screw that made my blade too tight, and now it's almost perfect. Right now it just slightly tighter than I like, but it's about the same tightness as all of my new Leathermans... and all of those loosen up perfectly after a little use. I didn't add fresh loctite - I'm hoping the old stuff holds again after the metal cools.
Question - Does anyone know of small and low-profile 1/4" ratchet or wrench? The ones I have are small, but the length of the bit makes handling 2 ratchets and a multitool at the same time difficult. It would be much easier if one would sit flush with the multitool so I could hold both in one hand.

Yeah trying to hold the wave and ratchets all in the hand is tricky. I ended up putting mine in a benchtop vise to hold.
-
Lots of great uses today, peeps

And thanks guys

-
Came home to a treat in the mailbox… I’ve got a nice surprise to carry with my Wave to round out the available tools.


-
@WillieTheJanitor said:
Great uses lads :ahhhDay 5 of 30
Meet pliers

Nice set of Knipexs, Willie

-
I just loosened the screw that made my blade too tight, and now it's almost perfect. Right now it just slightly tighter than I like, but it's about the same tightness as all of my new Leathermans... and all of those loosen up perfectly after a little use. I didn't add fresh loctite - I'm hoping the old stuff holds again after the metal cools.
Question - Does anyone know of small and low-profile 1/4" ratchet or wrench? The ones I have are small, but the length of the bit makes handling 2 ratchets and a multitool at the same time difficult. It would be much easier if one would sit flush with the multitool so I could hold both in one hand.

Those are a couple of great ratchets. I love my Klein ratchet. I used it several times today.
I use a couple of Klein 14-in1 precision screwdrivers for working on multitools:

-
@Grand_Banana said:
Came home to a treat in the mailbox… I’ve got a nice surprise to carry with my Wave to round out the available tools.Don't be a tease... what's in the package

@Adam5 said:
Those are a couple of great ratchets. I love my Klein ratchet. I used it several times today.I use a couple of Klein 14-in1 precision screwdrivers for working on multitools:

I have that same screwdriver. but it's only the 4-in-1. I love Klein tools

-

@Grand_Banana said:
The Wave is the ultimate dad MT...I don't have kids, so I'll take your word for it. But my Wave has done pretty well for itself thus far.
Great photos and uses, as usual!

Day 5
Early in the morning of day five, the cats' laser pointer got some fresh batteries. The fine slotted screwdriver just worked; the fine Phillips didn't work at all. I may need to see about a bit kit with a #0 Phillips.
[attach id=0 msg=2372409]
[attach id=1 msg=2372409]
.jpg)
.jpg)
-
Awesome Day of pics today

-
Day 6 of 30

The drain had to be dismantled and cleaned in the morning...

-
@WillieTheJanitor said:
Day 6 of 30
The drain had to be dismantled and cleaned in the morning...
Awful job but great shot!
-
Day 6 of 30
New arrival yesterday: used electrician. Needs a good cleaning and has some wear on the exterior, but the blades are in great shape. Looks like it was carried in a pocket but rarely used.
[quote author=Grand_Banana link=topic=89866.msg2372461#msg2372461 date=1665062065]
Day 6 of 30New arrival yesterday: used electrician. Needs a good cleaning and has some wear on the exterior, but the blades are in great shape. Looks like it was carried in a pocket but rarely used.
The electrician makes a great pair for the wave. The awl and wire scraper were 2 implements on the spirit that I wish were on the Wave. It’s been a while since I’ve needed that blade so we’ll see if it will get use this month in combo with the wave.
[attach id=0 msg=2372461]All together in todays pouch in the laptop bag.
[attach id=1 msg=2372461]

-
@Grand_Banana said:
Day 6 of 30New arrival yesterday: used electrician. Needs a good cleaning and has some wear on the exterior, but the blades are in great shape. Looks like it was carried in a pocket but rarely used.
The electrician makes a great pair for the wave. The awl and wire scraper were 2 implements on the spirit that I wish were on the Wave. It’s been a while since I’ve needed that blade so we’ll see if it will get use this month in combo with the wave.
[attach id=0 msg=2372461]All together in todays pouch in the laptop bag.
[attach id=1 msg=2372461] -
I now know what’s happening when I quoted myself - I tried to modify the post to add a bit of text. You can see the difference between the two. Selecting modify somehow made it quote. Maybe a bug or maybe my sausage fingers pushing the wrong button posting on a phone!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
