Help me pick
-
If you consider yourself a collector, then you'll eventually want one of everything. If that is the case, just buy the most expensive tools that you don't have yet. Even though you might not like the Free P4, you know you'll want it in your collection.
If not, I see a disturbing lack of Skeletools in your collection. I consider the CX a "must have", and the RX is very cool too.
-
It sounds as if you're looking for a safe queen rather than a user? My top pick for a safe queen would be a topo Signal. For a user, I'd be torn between a Rebar and a Wave; I'd get those in black oxide. But that's just me...
-
You seem to be lacking in the Supertool dept. I would start there

Perhaps the Heritage PST reissue for your collection.
-
@Rich_SD said:
If not, I see a disturbing lack of Skeletools in your collection. I consider the CX a "must have", and the RX is very cool too.I've owned 2 or 3 and I just don't care for them. I always give them away. My sister, a neighbor and i cannot recall who else. Not enough utility? bites my hands? i don't know why I just cannot keep one.
@Rich_SD said:
If you consider yourself a collector, then you'll eventually want one of everything. If that is the case, just buy the most expensive tools that you don't have yet. Even though you might not like the Free P4, you know you'll want it in your collection.yeah, i was that way last year with juices, I actually bought all of what i have last year. I really overpaid for some of them, amusingly the ones i have that are "perfect" were the cheapest. $15 for a perfect cs4, $45 for a kf4 that looks like it just came out of a package. $80 for a pro with not one blemish and it even came with a case that is still plush inside nearly 20 years later. craigslist beats ebay because people selling on craigslist rarely know what the actual value of what they are selling.
right now I have a craigslist buy of a knockoff kershaw a100c for $20 and 2 swisstool RS still in the original packaging @ $65 each. The latter I didn't want but when I looked on ebay they are selling for $175 used and at that point I could not resist the thought of actually making money on this "hobby" I'm hoping they will bid over $200.
as far as the free series go. I paid $60 for the p2 and although I don't like it, I feel i paid a fair price for it. paying over $100 for the p4 is not reasonable. no premium steel for the blade, and the crudity of the tools is just grating to me. If the discount was 40% off. I might be able to stomach that, and I've seen them on ebay/Craigslist for less than $100, but i am never motivated to buy. Once I can easily find one for $80 or so I might buy. but not a penny more.
-
@Farmer X said:
It sounds as if you're looking for a safe queen rather than a user? My top pick for a safe queen would be a topo Signal. For a user, I'd be torn between a Rebar and a Wave; I'd get those in black oxide. But that's just me...I have a rebar that i bought new for $35 and it has sat in the drawer since new. I have 6 or so waves of various generations and I've never paid more than $60 for any of them.
the topo signal is one has peaked my interest a couple of times in the past. When I bought the original signal I paid like $79 so they seem so expensive even with the discount. but that was then i guess.i will keep this in mind.
-
@SteveC said:
You seem to be lacking in the Supertool dept. I would start there
Perhaps the Heritage PST reissue for your collection.
I have the st200 and 300 already, but I was thinking of maybe the st300m I want to get a look at that pry tool and the extension that comes with it, so maybe at 2 with that and the topo signal.
as far as the pst, I have my original, it got me through the gulf war, keeping my 1950's straight from the Philippines 5 ton truck running, when it should have given up the ghost more than once.
the blade on it was trashed and so were a few of the other tools, the case was also turned into suede by the sand. I sent it back into leatherman when i got back and they fixed it all up and gave me a new case even with a thanks for my service note when it came back. better story than any heritage pst has.
-
You've got all the usual suspects it seems. Only thing I can think of is a collector what about the Tread?I didn't see a Raptor either.
Whatever you get Thank you for your service and enjoy the new tool/s.
-
looks like i could get the "maintenance kit" for $40 lol. they have the sharpener separate for 15 so that would be 10. about what they cost from worksharp.
anyone know how this works? https://www.leatherman.com/removable-bit-driver-126.html
Leatherman signal multi-tool, green
SIGNAL® Item #: 833016
Color: Green
Sheath: Black Nylon
Military DiscountPrice reduced from$129.95to $90.96
SUPER TOOL® 300M Item #: 832756
Color: Black
Sheath: MOLLE Black
Military DiscountPrice reduced from$109.95to $76.96
Saw for Super Tool® 300 EOD
SAW FOR SUPER TOOL® 300 EOD
Item #: 930377PRICE $6.00
Removable Bit Driver
REMOVABLE BIT DRIVER
Item #: 931012
Military DiscountPrice reduced from$24.00to $16.80
Shipping discount-$5.95
Sales Tax
$0.00
Estimated Total
$190.72or, add a crunch?
SIGNAL®
Military Discount
Price reduced from$129.95to $90.96Super Tool® 300M
Military Discount
Price reduced from$109.95to $76.96CRUNCH®
Military Discount
Price reduced from$109.95to $76.96total
$244.88 -
@cnlson said:
anyone know how this works? https://www.leatherman.com/removable-bit-driver-126.htmlIt's for the ST300, Rebar and Bond. You just push it onto your Philips driver

(I didn't have a better photo, the middle one)
-
The Removable Bit Adapter is one of the best accessories for the square shank Phillips out there
I keep it and yhe half bit kit it comes with, in my work sheath no matter what tool I have because of the buts of the regular bit adapter and if I have a tool with the square shank Phillips then it can be used as a bit driver as well 
The TOPO Signal is also a great addition
The 300m also has a vote from me and I will likely try to add the BO version along with my coyote tan one :ahhh -
Super tool 300M is quite a tool, now has the bit driver, the long awl/scraper and pry tool have extended its capability. I work in the security industry and I use the long awl to scoop out door pin holes in the transom now and then. Used the pry,nail puller to open small banded crate. A bit heavy to carry, mine was from the bay so I need to get the new style bit adaptor.
-
@Aloha said:
You've got all the usual suspects it seems. Only thing I can think of is a collector what about the Tread?I didn't see a Raptor either.
Whatever you get Thank you for your service and enjoy the new tool/s.
i've looked at a tread, but i don't wear a watch or much jewelry and I don't like how hard it would be to use the tools.
Raptor first row towards the bottom.
I joined to pay for college, but the education I got from going to war was more valuable.
Glad i got out before the GWOT. -
@stugumby said:
Super tool 300M is quite a tool, now has the bit driver, the long awl/scraper and pry tool have extended its capability. I work in the security industry and I use the long awl to scoop out door pin holes in the transom now and then. Used the pry,nail puller to open small banded crate. A bit heavy to carry, mine was from the bay so I need to get the new style bit adaptor.2 votes for the 300m
-
You mentioned a Crunch, but there’s already one in your list.
In your position, I reckon it’s between the 300M and the 300EOD, with a Curl as another possibility. If you have that many Waves and Charges and a couple of Surges, you clearly likely be one handed opening style more than the classics.
If you were just looking to add to your collection and didn’t need to buy directly from Leatherman to use the discount, hunting down a Darkside would seem like the obvious move.
-
@Crunchie64 said:
You mentioned a Crunch, but there’s already one in your list.In your position, I reckon it’s between the 300M and the 300EOD, with a Curl as another possibility. If you have that many Waves and Charges and a couple of Surges, you clearly likely be one handed opening style more than the classics.
If you were just looking to add to your collection and didn’t need to buy directly from Leatherman to use the discount, hunting down a Darkside would seem like the obvious move.
i have the mut EOD and I don't need that style of plier head a second time. I have no caps to crimp onto det cord.
the M has more interesting tools.
The crunch is just because It's unique and useful. Plus there is talk they may end production so it might not be around next year.
The darkside kinda goes along with the g10 charges. looks cool but doesn't add enough to justify $450 (the cheapest one I see on CL right now)
I do buy alot secondhand craigslist and ebay. I just bought that Supertool 200 for $34 on ebay. it was in perfect shape with only a little wear on the factory edge of the plain knife and missing the case. -
@Crunchie64 said:
I thought from your list you already had a Crunch. It’d be top of my list without a doubt.i do have one, but 2 would be twice as good, right?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login