What did you use your Sak on today?
-
Used the scissors and Philips screwdriver on my Spirit during window ac unit removal downstairs for the season.
-
Used the pliers on my Champ as big tweezers to hold a little plastic piece I had to glue. Very handy!
-
Those little pliers sure can come in handy. -
Farmers awl for reaming out some plastic holes and the blade for opening a bag of shoestring fries to go with burgers for dinner
-
Last night I did a case swap on my desktop PC. What I mean by that is that I took all the parts out of my old tower and put them in a new larger tower that has more space and more/better fans.
In the process, I used the bottle opener on my S557 to help remove the back panel on the tower to access some of the cables. Now any SAK could have done that. But the S557 really shined when it came to the new case! I used the in-line Phillips a few times but I also used the pliers! I needed to add a couple of motherboard standoffs to the case for my mATX motherboard. They are hex-shaped so I put them in as far as my fingers would take them and used the pliers to tighten them. The pliers worked great for that (I'm sure the Deluxe Tinker pliers would have been just as good).
-
used my cadet to open a package of coffee
-
Pioneer small screwdriver - adjusting the H limit screw on my bike. My Spirit pliers pulled my derailleur cable taught to give it more tension and fix a shifting issue.
-
I used the large blade on my 91mm Ranger to open a pack of gum and open some boxes at work. Also used it to stab into a cactus that I had just cut down so I could pick it up for disposal. I used the canopener’s screwdriver tip to pry staples out of drywall in a vacant apartment at work. I used the saw to trim some of the larger, dried out, dead branches from a rose bush. Used the file and small blade on my nails to trim up some of them. Used the straight pin to tuck in a loose string on my work shirt to prevent it from unraveling. Used the toothpick after lunch for what a toothpick does best, and, of course, I cleaned it before reinserting it back into its scale slot. I think that’s about it, LOL.
-
Here's a good one!
I was playing Battleship (the board game) with my daughter and noticed that some of the holes in the boards were too small for the pegs. I used the reamer function of the awl on my Climber to make them a little bigger as I found holes that were too small while we played.
Also, I am 0-2 to my 6 year old daughter in Battleship at this point...
-
great uses! I opened a envelope today, and it was a bill! Lol -
WARNING: This is not a post for more sqeamish folks. As I consider most of MTO's members to belong to the tougher sort, I'll post this. You have been warned. I'm not responsible for pics in your mind!

Well, the title says, what did you use your SAK on today? It wasn't today, but two weeks ago, but I didn't had time to post yet.
So, I decapitated mealworms with the scissors of my newly gifted Victorinox Huntsman. Sounds like the deed of a sadistic madman. Maybe a religious fanatic with extremely strict diet rules? Or a Star Trek Klingon fan who hates his gagh always crawling from the table plate?
Nope. It's all for a better cause. Read on.
It was 21:40 and only half an hour left in my late shift, when Ron approached me. He's the foreman of the cargo/night shift, the guys who put our commissioned goods on our trucks, so that our drivers can start delivery in the morning. He's almost as good equipped as me and one of two co-workers that I'm aware of actually edcing (the other guy being a real knife-nut). He likes to show off a bit and is rather extroverted, whereas I consider myself as adherent of the grey man philosophy (stand back, run below the radar, but be prepared). He's quite a character, so to speak, and it shows in the nicknames given to him: day-sleeper, grave-digger, or simply The Bat.
So Ron had a security shoe cardboard box under his arm and told me he wanted to show me one of his relatives... :ahhh I opened the lid, which had some rows of holes punctured, and found a small bat, about two inches long and barely alive. It was found two halls away on a pile of cardboard sheets, and nobody knew what to do.
Ron has even called the police station to no avail (in fact the police had no idea and only knew batman
). Other possibilities like the animal rehab center were out of reach due to the time.Then he asked me: "You're the nature guy here, so could you help this little one and contact the appropriate sites?" Well, several years ago we tried to rescue some orphan baby mice, and I promised to help. Ron was rather glad when I took the cardboard box to my car.

At home I told my gf we've been foster parents again, and the little bat needed our help. We tried to give him some water, via a pipette, but he didn't want to drink. Then we tried to gve him a flight possibility. With a glove I ushered him into position on a housewall outside. After a while he managed to hang upside down. I went inside to get a camera, and Barbara waited with him, the shoebox in hand. That was good, for since I returned the next minute, he just fell right off the wall, luckily into the cardboard box my SO had ready. We decided to go to bed, and equipped the box with some paper towels.
The next morning after breakfast snd my gf off to work, I had several calls after trying to learn a bit about bats. The little guy (he was a male, no mammary glands) could be a Pipistrellus pipistrellus or common pipistrelle in english. The german term is Zwergfledermaus, which means dwarf bat.
I hear you, pfrsantos, there might be strange relationships between dwarves and gnomes

Finally I got an expert from the bavarian organization for bird conservancy (they have a wide spectre) on the phone. Turned out he got Covid-19 and couldn't leave his home.
Told me my proceedings so far were quite professional; accepting no water could mean the bat was sick and could die shortly. I could try to feed him with mealworms. Now comes the ugly part: being accustomed to flying moths and gnats as prey, bats must be trained for accepting mealworms as food. Therefore, the mealworm has to be beheaded, the intestines pulled out, and the residual innards pressed out and fed.
No easy task, but I was willing to try this. The expert wished me luck, and I went off buying some mealworms.It went better than expected. The scissors of my newly gifted Huntsman saw a lot of use the next days... After his first three portions of mealworm, the aptly named "Ronnie" decided to take a drink from the pipette. So three times a day a feeding session took place, about an hour, for eight to ten mealworms and several drops of water. Ronnie was still rather lethargic, but his appetite was growing, and the rest of day & night he could sleep.

After some days, he was able to feed on whole mealworms, and my Huntsman's scissors could be put to rest.

On the evening of Monday, Oct 3rd, the feeding session was different. He managed to devour seven mealworms and three portions of water in five minutes, and tried to shiver and move more agile. Time for release
His weight rose from 4,8 grams to 6 grams, too. A good sign. 

So at 19:00 we drove to my workplace (outside the halls, of course), where we opened the box, he literally ran up the tree, I didn't manage to get a goodbye photo. In about four meters height he flew off, rose to ten meters, took a circle back as if to say "bye", and was gone in the dark.
Our garden birds feasted the following days on the remaining mealworms...

If you read this far on this verrry long post, you might have guessed it was a really absorbing experience. I even forgot to donate my usual 20€ at the end of september, and missed SurgeUKs giveaway ...
But as one might say, important things shift when somebody becomes parent (or foster parent).We are really happy the whole story got its happy ending...





-
Good work, Tinker Gnome! The only bats I’ve ever handled were ones my parents’ cat would catch from time to time - no idea how she did it as she wasn’t exactly a prolific hunter! Amazingly the bats were un-damaged, and after a bit of recovery time, I was able to release them (away from a disappointed cat, obviously!) and let them fly off into the night…. Poor things - we speculated that the bats must have been confused by a yawning cat and thought it was a cave to roost in!

-
Great story! Is there a "Hero saving the day" badge ?
-
Well done! I awlready knew about it, though. Ronnie told me when he got back to my cav... huh... I mean... good work!

-
Last week, the Spirit got used to unscrew a window ac unit getting it out of a window for the season. Today I used the scissors and main blade on the new Super Tinker to cut packaging and a cardboard box to put in the trash and recycle bins.
-
I used the small screw driver on my Cadet to put my Dad's new walker together
-
I used the blade in my Victorinox Swiss card to open an amazon package
-
Screwdriver use today...
Inline Phillips on my SwissChamp to remove the screws on a plastic base so I could get to a light bulb to replace it.
Then the combo tool Phillips on my MiniChamp to remove the screws on a battery cover.
-
tinker gnome, that was a wholesome story! and thanks for the pictures!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login