What Did You Use Your Multitool For Today?
-
@Chako said:
I used my Leathersak MK1 to put up dry wall at a friend’s house. I then left it with him because he liked its feel and sharp blade. He preferred it over the more dedicated tools for the job.It won't be sharp for long in my experience, plasterboard (drywall) is really tough on knives. Great gesture leaving it with him though. You just might get it back when it needs sharpened. :D
Today I adjusted the saddle on my daughters bike with both a Fuse and a Pulse.
I cut up an apple for lunch with my Ambassador, very nice. But then cut a plaster to size after getting a sliver of glass in my finger, not so nice . Oh yes, I used the tweezers as well. :-\
-
Used my SOG PPP (pliers) and my Prybaby (screwdriver) to install a toilet seat at work. The old one was broken by a very large :o guy and we got a temp one from walmart till the folks at maintenance can put us in a new one.
-
Used my EDC Gerber Clutch to install a split ring into the lanyard hole of a knife. (Gave my brother a KaBar Mini Dozier folder for his birthday and he wanted it on his keychain.)
.
-
Technically not today, but over the weekend built a very large (33' x 12') deck at my cabin, fixed the table, changed my trucks oil, and cut up several pesky objects lying around with my Skele CX.

-
Used my SAK to open a parcel from Neil which contained........
More SAK

Thanks Neil ;) -
The other day I used my wave to take a horrendous picture for the gerber crucial contest; I was too lazy to read the rules and somehow thought the winner was randomly selected like all the other giveaways. Also thought it had to be a picture while you were at work.
Man, I must have been buzzed or dreaming ???. Nobody can top Dunc's repulsive fish pic though..............still voted for my own lame ass :D
Today used the wave to install a thermostat, wire strippers and wood saw to enlarge the sheetrock hole....excellent performance, strippers alittle hard to use compared to dedicated tool.
-
today was a big spirit day.
removed a coach light from one house and installed it on another. the wire stripper and cutters were impressive.
removed and installed a frige door in seconds flat with the pliers and phillips.
adjusted the strike on an entry door with the pliers chisel and PE blade (cut my thumb).
i felt like i had a whole truck load of tools on me and i did not have to rely on others to reach my goals.
no other MT could have done this work in quite this fashion. -
Today I used my SOG PPP and my Kick to change out some parts on the floor machine. The snap ring system that holds the pads to the floor was messed up and the new ones had to be installed. The SOG PPP worked well except for when the screw was stubborn and then because the tool is non-locking it folded on me (like 4 times). I went and grabbed my Kick and even though it's a non-locking tool as well it seemed to grab the screws good and resist folding.
I am trying to re-evaluate my EDC, it's usually a knife or something lite like a Skeletool or something but I keep bumping into things that I need to grab a bigger tool (like the kick). I have a pretty good size lunch box (with pockets and stuff on the outside) and my kick resides on the outside of the lunch box in one of those pockets. Because of the temperature swing between hot and cold (ice pack) my Kick needs constant attention because it keeps developing rust. If I did not keep after it I am sure it would run crazy and it would be heck to get my tool back to looking decent.
I am toying with the idea of leaving the kick out of the box and carrying it on my person or carry something larger like a Wave/Charge. Sometimes I wish I did not get rid of my Spirit, it had the weight pretty much of Kick but with locks and a heck of alot more features. Maybe I should carry the Fuse? It's like the kick but with the addition of locks, as long as it's on me I should not have to bother with the rust issue like I am and I would not need two tools all the time. what you folks think?? It's kind of crazy, I wear slacks/dress shirt/tie and I wear a multitool. ::)
-
Today my father abused my PST to annoy me.
But that's why I leave it on the dresser, to protect more loved (and harder to clean) ones...
:D
-
@David Bowen said:
Today I used my SOG PPP and my Kick to change out some parts on the floor machine. The snap ring system that holds the pads to the floor was messed up and the new ones had to be installed. The SOG PPP worked well except for when the screw was stubborn and then because the tool is non-locking it folded on me (like 4 times). I went and grabbed my Kick and even though it's a non-locking tool as well it seemed to grab the screws good and resist folding.I am trying to re-evaluate my EDC, it's usually a knife or something lite like a Skeletool or something but I keep bumping into things that I need to grab a bigger tool (like the kick). I have a pretty good size lunch box (with pockets and stuff on the outside) and my kick resides on the outside of the lunch box in one of those pockets. Because of the temperature swing between hot and cold (ice pack) my Kick needs constant attention because it keeps developing rust. If I did not keep after it I am sure it would run crazy and it would be heck to get my tool back to looking decent.
I am toying with the idea of leaving the kick out of the box and carrying it on my person or carry something larger like a Wave/Charge. Sometimes I wish I did not get rid of my Spirit, it had the weight pretty much of Kick but with locks and a heck of alot more features. Maybe I should carry the Fuse? It's like the kick but with the addition of locks, as long as it's on me I should not have to bother with the rust issue like I am and I would not need two tools all the time. what you folks think?? It's kind of crazy, I wear slacks/dress shirt/tie and I wear a multitool. ::)
Honestly? I'd get a Pulse.
Failing that I'd go for the Fuse. -
I have a Pulse, I should try it today and see how it works. Do you think thicker drivers have anything to do with the strength of the tool? The Kick/Fuse has a huge phillips and the pulse/pst is half the size (well sort of).
-
@David Bowen said:
I have a Pulse, I should try it today and see how it works. Do you think thicker drivers have anything to do with the strength of the tool? The Kick/Fuse has a huge phillips and the pulse/pst is half the size (well sort of).I've not torqued the heck out of the Phillips on the Pulse but I really can't see it being a problem, the similar design on my Supertool never let me down (I know it's slightly heavier, but I did put that one through hell). I've always thought that the thicker shaft on the Fuse etc was mostly so as it works with the extension and bit kit. I could be wrong though.
-
Used my wife's S2 Juice to remove 2 extremely stuck pins in the horse trailer. Lifesaver, it was. She was pulling out at 6 am with a horse and her S2 was the ONLY tool around. Worked perfectly.

-
Well this is a first...
Used my Juice to cut a cardboard box to make a home for...a mama cat and 4 kittens. Some soulless...bleep...left a mother cat and 4 barely 2 day old (from what I can tell) kittens in the halways of my apartment building. The other residents and I got together enough stuff to make a nice little temporary house for them with food and water and litter box. We all agreed not to do laundry tonight so they could have the laundry room. Poor little kitties. So I have a "used my mt" story and a "did a good deed" story. A friend of mine from work does feline rescue and is taking them in the AM.
Gray -
Used my antique German hammer MT to whack the bejesus out of our 70's era glass sliding door's runner. It had bent at the end badly.Confined space it worked well.Used my Spirit to secure a new wooden stop in the runner , tight spot, need the Core, a bit better , had to finish the job with my new Cybertool's ace long bit extension(flipping great for the awkward space).
Side gate sagged & consequently hard for princess wife to unbolt/bolt. So I fixed it by ....... moving the bolt lock up a bit ::) :D :D
Used the Spirit, job made harder to do as I reused the rusted(almost knackered screws). One screw broke & had some Vic slippage , but to be far to the Spirit it was the cactus screws that was the main cause of bit slippage.Used my Super Bear Jaws to break the blade tip on my BO LM Mini :'( :'( :'( :'( :'( :'( :'(.The blade tip had been badly twisted when I got it & I had got it almost 90% straight with meticulous work.I was using the Bear Jaws to try & get the small crease out of the tip & it slipped & broke the tip :( :(.
Really bummed as I had up to that point got it almost right(the tip possibly weakened by all the work to get it straight
) -
Used my Huntsman (Thanks Neil
) this weekend to do the following:Open a bottle of Bulmers Cider, make some kindling, opened 3 tins, poked about in a fire to get some baked potatoes out, make two sticks for toasting toast on an open fire, snipped a number of labels, pull a cork for the guy next door who forgot to bring anything to open his wine with, made some sandwiches, cut some cheese, cut a swiss roll, stirred a number of cups of tea and opened a bottle of Bulmers pear cider :ahhh
That's right folks we went camping :D
-
Nothing to hefty today... I'm down by the seaside visiting the olds :)
I cut and file my nails with my Micra and then a cut and bent some wire with my KF4 to do a fix on my old mans glasses.
-
Been using the crap out of my Spirit lately. Its bent and cut coathanger to make a wire to hang a mirror. The awl has started many pilot holes for phillips screws (trying to baby proof some stuff since the little man is crawling).
-
Used a SwissChamp and a PST to assemble a gas barbecue for my Mum and Dad. Took colourful enunciating ages, mainly due to my lack of competence :-[
-
I'm currently moving out of my house, so the Spirit has seen lots of use in the past few days. Taking apart furniture, dismantling my weights bench, cutting tons of things, filing sharp edges, snipping wire and finally opening my beer this evening.
Lifesaver :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login