Show off your Sak mod's!
-
Thanks Enginears! It's a lot of work to try and do the modifications you want, but really rewarding when its all done and in your hands. I'm glad I found this site. It has given me a lot of ideas and inspiration as to what can be done. I also made the toothpick into a small screwdriver and made a spot for a small pin. Its weird how much fun I had doing small, time consuming changes to this tool. Thank you to all the people who have posted tips and tricks over the years.
[attach id=0 msg=2375664] [attach id=1 msg=2375664] [attach id=2 msg=2375664]



-
Someone else posted this idea here. I just went ahead and tried it. Works great!
To avoid the can opener slipping when you're using it, cut a small groove in the lower tip, so it fits the rim of the can.
I used just a triangular file to do it. Put two fingers on the sides of the lower tip, as guides, and gently run the edge of the file down the middle, to create the groove.
Keep doing this without applying much force, so as not to have the file slip. After a while, test it on a can to see if it's deep enough. Keep repeating until it works.





-
nice mod Blantz

full of good idea
Thank you for sharing

-
@Enginears said:
Hello, new here and trying to post. I am new to modding, this is one of my 2 layers. Small blade and saw on one layer and an integrated pocket clip. I am in the process of making some leather scales for it. [attach id=0 msg=2373209]Hello ,
It's a cool mod for a 1st time it's greatMechanically it is not perfect, the saw and mounted twisted, and must be accompanied manually so as not to hit the small blade.
I would have liked to make such a successful mod for my 1st time
-
My 93mm Explorer has just received new red liners and a nail file.




-
Ok, now that’s slick! A FarmerX is only missing a nail file besides a Philips, compared to a perfect one for me, so by doing what you just did, I could even upgrade to one without even taking it apart,,

JR -
I attached the file to the scale while the knife was apart, but with a little care you can probably do it without taking the knife apart. I used a 58mm nail file but any file of a similar size should work.
-
@ComboTool said:
I attached the file to the scale while the knife was apart, but with a little care you can probably do it without taking the knife apart. I used a 58mm nail file but any file of a similar size should work.I fig while open (of course) drill and tap, then use like you said probably any file should work if done right, and then just fasten on, use some what is it thread hardener?
JR -
Sweet alox mod
Might consider rit dye for the magnifier. You could turn it red, just need a use a candy apple or bright red. -
@MadPlumbarian said:
I fig while open (of course) drill and tap, then use like you said probably any file should work if done right, and then just fasten on, use some what is it thread hardener?Exactly

@pa_strunk said:
Might consider rit dye for the magnifier. You could turn it red, just need a use a candy apple or bright red.Thanks for the suggestion, I will look into it although I like the next time I feel like taking it apart.
-
@ComboTool said:
My 93mm Explorer has just received new red liners and a nail file.That looks super nice! Something I haven't seen here

Only thing I would change would be countersunk screws, maybe. -
@Annihilator said:
That looks super nice! Something I haven't seen here
Only thing I would change would be countersunk screws, maybe.Thanks!
It's a matter of taste, but I prefer button head screws on Alox scales, they look more like the original pins. -
@ComboTool said:
Thanks!
It's a matter of taste, but I prefer button head screws on Alox scales, they look more like the original pins.Ah, so it's a deliberate choice of design!
May I ask the obligatory question of where you got the pivots? :D -
I bought the pivots from DE Custom Forge, who is/was a member here.
-
Thank you. Yeah, he/she seems to be about the only source for those :D Was just curious...
-
ComboTool, That is a beauty, love the red liners and always an additional file. Great work.
-
that is a good looking SAK. Well done. -
Thanks everyone for the kind comments.
-
@Enginears said:
Hello, new here and trying to post. I am new to modding, this is one of my 2 layers. Small blade and saw on one layer and an integrated pocket clip. I am in the process of making some leather scales for it. [attach id=0 msg=2373209]I like that!
can I ask which backspring you've used for the saw and did you need to modify it at all?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login