Show us your Spyderco
-
I have the S30V version (which, otherwise is identical), and I really like it. Opens quickly, and the compression lock is easy for a southpaw to use.
This begs the question, I am beginning to wonder if mine's really S45VN and not S30V. There's nothing at all wrong with it, and I'm sure that a mismarked steel on the tang would be enough to make it "defective". I did buy it heavily discounted late 2020 during the seconds sale.
From what I’ve read the Para 3 was made in S30V before Spyderco made the switch to S45VN. I don’t think there is a huge difference in the two steels.
-
Nice Para 3
S30V, S35VN, S45VN oh boy Crucible. In the "real world" you may not notice a difference. The formulation that traded toughness for a small decrease in edge retention in S35VN over S30V to me was no big deal. Going to S45VN seems to be a better move in that the edge retention of S30V is retained with the same toughness and stain resistance of S35VN but......... really?
I'd still rate S30V very high. In my salty environment I have never had an issue. I can also say I've never had issued with edge retention for say to day usage. My S30V is Benchmande and Spyderco.
Data points suggest S45VN is an upgrade but if you're happy with your Para in S35VN
.As with all things YMMV.
https://knifesteelnerds.com/2019/11/01/crucible-s45vn-steel/
-
My PM2 was S30V. I used it to open bags of ice melt in the snow and put it away wet. Never saw a spot of corrosion. I’m not really a steel snob. I’d be just as happy if I was sent a Para 3 in S30V. -

I'm with you guys. S30V is just fine as is S35VN and S45VN. However, I do like CPM 20CV for some reason since I had it used daily first time in the Fools Of April Buck 110 challenge and on hikes around the Irish West Coast frequently then.
I might imagine it... but it really holds the edge well and showed no single issue with corrosion....yeah...my subconscious is probably just trying to justify the purchase :D
Now since we picked up kayaking and moved down to the sea I'm curious about LC200N

-
Salt 2 in its natural environment...

-
@McStitchy said:
Salt 2 in its natural environment...
Fantastic shot there 
-

I think LC200N would be a fantastic one to try in those conditions. I know H1 is most certainly at home there.
As for CPM20CV
I dont believe you need any reason to justify it. If compared to S30V then you could very well see a difference in edge retention. I know data suggest they care close but in the real world things are a bit different. Its one heck of a steel and it was going after M390 so it had to be. It should also be great in corrosion resistance as it has a very high chromium content. -
Surge, Aloha and BarryThis is close to our new home we moved to over a month ago. It's far out to the west and a pain to get to the office, but it's nice to have the sea at your door. And a good reason to get a Salt 2 :D

-
I think LC200N would be a fantastic one to try in those conditions. I know H1 is most certainly at home there.
As for CPM20CV
I dont believe you need any reason to justify it. If compared to S30V then you could very well see a difference in edge retention. I know data suggest they care close but in the real world things are a bit different. Its one heck of a steel and it was going after M390 so it had to be. It should also be great in corrosion resistance as it has a very high chromium content.
Aloha. Initially I chose CPM20CV for those reasons, we already spent a lot of time on hikes around the Irish West Coast and slightly salty conditions. And it didn't disappoint yet 
-
The Salt series is my favorite of the Spyderco lineup. I only have one at the moment, the Autonomy, but Noah has both Atlantic and Pacific versions.
-
@Barry Rowland said:
The Salt series is my favorite of the Spyderco lineup. I only have one at the moment, the Autonomy, but Noah has both Atlantic and Pacific versions.I'm not sure I need an automatic, I'm not working much with gloves. But I'm curious about the mechanics and maintenance abilities of the Autonomy now :D
Meanwhile I'm looking forward to put my Salt 2 to frequent use.
-
-
It's actually pretty maintenance free Stitch. It was designed for our Coast Guard rescue swimmers so everything is almost over engineered on it. H1 means it's basically rustproof. I clean it with dish detergent from time to time and that's about it. There's a spring kit for it from Spyderco but I haven't had the need yet. To be honest, my PM 2 sees more use most of the time.
-
Oh... that makes it even more interesting to me now. Thanks Barry

But yes, the PM series is great. I like the compression lock a lot too.
-
It's a solid bit of engineering. I have to say that I have a soft spot for the older Spyderco knives, like the Endura, Delica.
-
I better not look into them :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
