LKL SWISS-TECH, the origin of SWISS+TECH tools
-
Cody6268
Your information comparing both tools is very valuable. Thank you for sharing.
I respect anyone who actually utilizes these tools. (^▽^)/pfrsantos
I hope you enjoy my post !

Chako
I introduced threads about your wonderful SWISS+TECH collection.
I really enjoy looking at your collection. (´∇`)
- MicroTechnician
The Original jet Black Finish 5-in-1 Tough Tool with Precision Pliers, Wire Cutter/Stripper, Emergency Shear, Philips and Flat Screw Drivers. It locks to a Key Ring. 1.6 oz.
i) Initial model
The original package box.
Front and back of the tool. LKL is inscribed on the rivets.
The instruction paper. I just noticed that there is no word “MicroTechnician” on the package and the paper. Perhaps LKL Innovations initially called it just "Swiss-Tech".ii) Later model (Sold as Swiss+Tech Micro・Tech 6-in-1)
The instruction paper was inside the clamshell package.
NOTICE
[list type=decimal]-
Initial model has 5 functions because they counted wire Cutter/Stripper as one function. Then they counted it as 2 functions. So, this is a 6 functional tool now.
-
The photographs here ware of initial models “SWISS-TECH”. But the other part reads “SWISS+TECH”.
-
LKL Innovations “Perry Ohio”, “Cleveland Ohio” writing side by side.
-
The sticker for "Made in USA" is placed over the words "Made in China".
The actual tool “SWISS-TECH”, “Made in U.S.A.”iii) SWISS+TECH Micro-Tech 6-in-1
I forget what kind of package it was. Thin can ?
Please notice the additional 1 function is available. “BONUS! 1/8 Rule Markings”
I think this is 7-in-1 actually.iv) Comparison
Left to Right
Initial model, Later model, SWISS+TECH Micro-Tech 6-in-1
Initial model has different shapes of pliers-head.
Side views. The Rule Markings are only on the recent tool. -
-
nakken
Thank you for reading and replying !

- Mariner
Specially designed for Mariners & Fisherman with the latest in NP3 Anti-Corrosive Finishes. All original functions plus Serrated Shear, Lanyard Hole, and Posi-Grip Jaw. Matte chrome finish. 1.6 oz.
The original package box
Swiss-Tech Mariner
The instruction paperI think the Mariner was LKL’s second product.
As in the quote, since that, they had changed the pliers-head shape to “Posi-Grip Jaw”.
And they added a lanyard hole on a handle because you might loose tools easily on the ocean. So, the detachable to key ring feature was no longer ilustrated – it might be only the matter of space – in the instruction.The additional serrated shear may help to cut ropes. But it is not too sharp. I haven’t tried it yet.
-
- MicroPlus
All Microtechnician functions plus micro-sized Philips and Flat Screw Drivers. Posi-Grip Jaw. Black oxide finish. 1.6 oz.
i) Initial model
The original package box
Swiss-Tech MicroPlus
The instruction paper.
1998ii) Later model
The package was changed!
Silver but rusty model.
The instruction paper.
2000
NOTICE
[list type=decimal]-
Until 2000, instruction papers were printed on one side. Since then, the introduction of other products has been printed on the back of the papers (Right half of figure).
-
Address changed from Mentor, Ohio to Perry, Ohio.
-
In the introduction of other products, they still said MicroPlus was “Black oxide finish”.
iii) Swiss+Tech Micro-Plus 8-in-1
2003 Black oxide model
2008 Silver model
XXXX Gold modeliv) Comparison
UL) MicroPlus Initial model UR) MicroPlus Later model
M) 8-in-1 Gold
DL) 8-in-1 Black 2003 DR) 8-in-1 Silver 2008All models have 1/8” Rule Markings. So, they really are 9-in-1 tools!
-
- Gold
The Ultimate in Ultra-Light Pocket Tools with Gold Titanium Nitride Presentation Quality Finish. Same functions as Microtechnician. Special “Air Weight” arms for the lightest Microtechnician at 1.3 oz.
The optional wood box. You could choose black plastic box (polystyrene gift box) or wood box (cedar gift box).
Swiss-Tech GoldUnfortunately, I don't have the instruction papers of Gold and can't find them on the web. If you know of any information you can share, please let me know.
One of a feature of Gold was “Air Weight” arms – arms with holes. The lanyard hole of Mariner is 3mm in diameter. On the other hand, each hole of Gold is 4.6mm in diameter.
The pliers-head of Gold have “Posi-Grip Jaw”, so it’s not same functions as Microtechnician.
Comparison of Gold and Swiss+Tech Micro-Plus 8-in-1 Gold.
Left: Swiss-Tech Gold
Right: Swiss+Tech Micro-Plus 8-in-1 Gold -
- Utili-Key UST (Ultralight Survival Tool)
The lightest, most compact multiple tool ever developed. Fully extends and snaps open for functional knife. Includes Knife Blade, Serrated Cutting Surface, Micro-Sized Phillips Screw Driver, Eyeglass Screw Driver, #1 Flat Screw Driver and Bottle Opener. Available in silver stainless and titanium nitride gold. 0.5 oz.
i) Swiss-Tech Utili-Key UST
I found that they called this as Slim-Line Gift Box.
Silver stainless
Patent documents of USD405953, “KEYRING TOOL”, Larry K. Legg, Feb. 1999ii) Color variation
Titanium nitride gold
Black, not mentioned about in instructions.
Comparison of silver, black and gold models.iii) Swiss+Tech Utili-Key 6-in-1vi) Comparison of Old and New
Left: Swiss-Tech Utili-Key UST
Right: Swiss+Tech Utili-Key 6-in-1 -
- ScrewzAll
Four Precision Screw Drivers – Micro Flat Blade and Phillips, Standerd Size Flat and Phillips, Stainless Detachable Key Clip, and Jet Black Finish. 1.0 oz.
i) Swiss-Tech ScrewsAll
The design of the gift box has changed since the introduction of ScrewzAll. Black plastic and cedar boxes to this type.There were two types of the instructions printed in 1999.
Instructions printed on one side only. The location of the company was Mentor, Ohio.
Instructions printed on both sides. The location of the company was Perry, Ohio.ii) Swiss+Tech Silver Screws・All 4-in-1
The location of the company was Perry Ohio, Cleveland Ohio (writing side by side).iii) A confusing model (May be Swiss+Tech)
The date of manufacture is unknown. I have no packaging or instructions.
Upper: Swiss-Tech ScrewzAll
Lower: A confusing modelLooking closely, you can see the difference between “SWISS-TECHTM” and “SWISSTECH
”. Both fonts are also slightly different.iv) Comparison of Old and New
Left: Swiss-Tech ScrewzAll
Center: A confusing model
Right: Swiss+Tech Silver Screws・All 4-in-1 -
- ScrewBall
Each ScrewBall has eight spring lock “In-position” Drivers in a Nylon Base with a Detachable Keychain The drivers are made from 4140 Tool Steel and weights only 2 oz.
i) ScrewBall (Yellow model)The yellow model is typical of this tool. But unfortunately, I don’t have yellow model.
There are great reviews about ScrewBall at Multitool.org, and you can see the yellow model of this tool.<u>・Swiss-Tech ScrewBall Review, by David Bowen, March 2006.</u>
<u>・Swiss*Tech Screwball, by Grant Lamontagne, April 2022</u>And of course, you can learn about it on the Multitool Encyclopedia.
<u>・ScrewBall, by Bob, May 2016</u>
ii) ScrewBall (Gray model)
The pyramid-shaped package made of clear plastic and paper. I love it!
Patent documents of US2001/0045145, “KEYRING TOOL”, Larry K. Legg, Nov. 2001・Timeline of LKL Products
My guesses include.
**Year** **Product** 1996 MicroTechnician 1997 MarinerGold
1998 MicroPlusUtili-Key
MicroPac1999 ScrewzAll 2000 ScrewBall
I will make one more post and finish!
-
・Bonus Images
<u>JPS design group</u> was one of LKL’s business partners. They had designed some sales promotion materials and have stored data to use as samples. That data is not publicly available at this time, but Google remembered old links of them. So, I could browse them.
I decided to preserve that data as a historical document.
And I will post them.i) Instruction Sheetsii) Dysplay Adsiii) Blister Cardsiv) Dealer Sheetiv) Sell SheetsThat’s all.
I hope this material will be useful to you.
Thank you very much. -
-
FANTASTIC compilation of early Swiss-Tech information Hiraboo! I am very impressed. Thank you very much for doing the research and sharing it with all of us.

-
J-sews
I am so glad you took notice of my post. (^0^) And I am very happy that you are back in action. Because I was worried that you might have had some serious illness or a serious accident.
It is a great honor to hear back from these legendary members.

I will continue to keep you informed on the topic of multi-tools from Japan ! -
BUMP.. Don't want this amazing info to too buried.
hiraboo
always great info when you post. Thank you. -
Such awesome info and pics, hiraboo
I have a few of these from when I first joined MTO and they are great
so much info in these posts 
-
Thank you for your warm words !
I also enjoy sharing a lot of knowledge from all of you and reading your fun posts.
I would be honored if my information could help MTO develop. So, if someone is willing to edit the MultiTool Encyclopedia / Wiki, I will gladly provide the information and pictures.

Or… if admin members will allow me to do so, I will try to edit that with my horrible grammatical ability. I wouldn't recommend it. :ahhh
-
Very interesting thread with a lot of good information.
-
-
-
Sos24
I am glad you are interested in my post !
(o´∀`o)Mini
I am not fluent in English, so I try to post pictures as much as possible.
Σ【◎】ω ̄*)PitCarver
I love small tools too. The ingenuity of the craftsmen is wonderful !
∑d(゚∀゚d)A few more additional information. 1 / 4
The Swiss-Tech Utili-key UST was launchd in 1998. The patent date was Feburary 23, 1999.
Thus, there appears to be another model with different markings on the body after 1999.
Upper : before 1999
Lower : after 1999Another version of the instructions.
The company location was Mentor, Ohio. It is an early version.What I posted earlier --- Perry, Ohio --- is a later version.
-
I have most of the "standard" S+Ts. The XTREME (22-in-1) is nice for having as much as possible without sharps, but it's a brick. One lives in my travel bag since it can (in theory) make it through security if need be.
The Micro-Max (19-in-1) is the best in terms of being practical to carry with maximum functions. One sits on my workbench (in addition to occasionally getting carried) and I grab it all the time.
They're all cool gadgets.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login