GOAT Tools
-
Indeed. Can't wait to get my grubby fingers on one

-
@carl said:
The torsional (twisting) forces generated (in the multitool handle) while using the bit driver are 'channeled' through the slimmed-down thumb cutout portion of the handle which contains the bit driver.Question: Will this result in excess flexing of the multitool handle while tightening down a screw?
The same rationale would apply to the multitool handle which contains the large flat blade screwdriver.This may be a good practical reason to attach the optional titanium scales for added rigidity and strength.
@Dutch_Tooler said:
Interesting take... the twist would be counteracted somehow by the pivot heads not allowing too much axial give, but whether that's enough?
Just threw one of the multi-tools in a vice with a 1/4" hex in the bit driver. Connected a 1/4" socket to my torque wrench, started wrenching, and it easily got over 80in/lbs. The handle holding the bit twists slightly, but goes right back to where it was. Out of curiosity, I did the same test with my old Wave and it acted the same.
-
Here is the latest GOAT video showing the sheath in vertical and horizontal carry positions:
https://www.youtube.com/watch?v=_o2nPgv4URs -
@GOAT Tools said:
Just threw one of the multi-tools in a vice with a 1/4" hex in the bit driver. Connected a 1/4" socket to my torque wrench, started wrenching, and it easily got over 80in/lbs. The handle holding the bit twists slightly, but goes right back to where it was. Out of curiosity, I did the same test with my old Wave and it acted the same.Good enough. Are you one of the engineers of the GOAT Tool?
If so, do you have any updates? -
The GOAT Tools website is in the beginning stages, showing some prices and tool blank/handle scale templates:
-
If those prices are for real...Leatherman, Gerber, and Sog are all in Big Trouble. It all rests on GOAT to deliver on a quality product. If they do, this is going to be a major shakeup in the market. Also did anyone else notice the 100 year warranty??
-
Looks cool. What are the dimensions on this thing?
-
Those prices are for the different tools you can ad, not for the complete multitool I think……
-
Yea, complete tool is $119
-
Latest Goat Video showing how to attach optional scales. Wait for the last 20 seconds which shows a really cool blued titanium-scaled tool:
https://www.youtube.com/watch?v=WoqPefjrzas -
The replacement screws which come with the optional scales are black flat-top screws which replace the stock round-top stainless satin screws. The screws come with Locktite pre-applied to the threads.
This MT is looking real good!
-
An odd thing I noticed in the video is the titanium-scaled Goat MT shown at the end (the narrator's personal EDC) has both locking levers on one side of the tool (non-blued side) while most other GOAT MTs shown elsewhere have one locking lever on either side.
This seems to imply the locking levers can be located wherever the user prefers.
Also, if the user wants to attach the pocket clip on top of the optional scales, a standard round-top satin screw is used for that one hole, not a black flat-top screw - most likely because the pocket clip screw hole is not countersunk.
-
A mail from Goat Tools has just announced that shipping has started

-
@Dutch_Tooler said:
A mail from Goat Tools has just announced that shipping has started
Likewise

-
I Should have mine some time next week. I will be making a few videos that same day.
Cheers.
-
@carl said:
An odd thing I noticed in the video is the titanium-scaled Goat MT shown at the end (the narrator's personal EDC) has both locking levers on one side of the tool (non-blued side) while most other GOAT MTs shown elsewhere have one locking lever on either side.This seems to imply the locking levers can be located wherever the user prefers.
Also, if the user wants to attach the pocket clip on top of the optional scales, a standard round-top satin screw is used for that one hole, not a black flat-top screw - most likely because the pocket clip screw hole is not countersunk.
Your attention to detail never fails to amaze me! I do have both Hot Swap levers on one side, testing it out. Easily configurable any which way. Tools just have to be space 1mm from the frame to properly lock open, the lever accomplishes that spacing, as well as a 1mm washer next to the saw on the launch configuration.
The pocket clip is not countersunk, you are correct! We provide 8 new flat top screws with scales in case users don't want to use the pocket clip. With the clip, that round top works great.
(Sorry for the late reply, somehow I stopped getting notifications for this thread. Going to check my vendor status)
-
Did anyone else get their tool besides me? would love to hear everyone's feedback on the tool.
-
Sweet goodness I need pictures!
-
@Maxlvledc said:
Did anyone else get their tool besides me? would love to hear everyone's feedback on the tool.Nope ::)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login