✬ 2022 Chuck Yeager Memorial Challenge ✬
-
@PitCarver said:
It's odd that I can actually find red Alox cadets but try to find a red Alox MiniChamp would cost over $100.00.Tell someone that one of my Grail knives is a red Alox MC I get all kinds of funny looks. ¯\_(ツ)_/¯

I’m with you PitCarver i’d love to get my mitts on a red Alox MC and a Red Pioneer to boot!
-
DAY 06
Small blade used this morning to free some new scales for a knife I'm gonna make up for my son. A Vikings fan so I figured Yellow as I can't find Purple scales.
Blade worked well. Tried the hook on the peeler first but it wouldn't bite.

Sent from the Dusty Desert
-
@aicolainen said:
Day 06:
Peeled an orange today. Probably forgot to post yesterday. Was busy all evening baking gingerbread with the kids.
I probably could have used the exec more, but it's hard to forgo the one handedness of a dedicated folder.As expected, December so far has been all about administrative work and closing the chapter of 2022, so I haven't been thrown into much of any exciting situations where my tools and practical skills are put to the test. While not overly exciting, it also mean the exec hasn't been insufficient in any way. And the closer we get to christmas, the more it will be able to shine, I suspect.
I'm not sure what year this tool was brought to market, but the more I think about it, the more I feel this is a product of a lost time. And I wish it wasn't so.
Just think about it, of its 5 main implements, 4 of them are cutting tools. It's literally insane in today's world, where we've sadly been deprived of most cutting tasks. I mean, really, many of us hardly has the privilege to cut anything anymore.
The weird splash of nostalgia you may be subjected to by changing out your pocket tool for a couple of days.You're right about cutting tasks. In the Victorinox reddit, I often see people touting the Explorer and Deluxe Tinker as great EDC SAKs. And they are, even if they are a little bulky in some ways. But I wonder if people say that because those SAKs feature more tools for opening/manipulating things (screwdrivers, pliers, magnification, etc) versus actually cutting things. For myself, I use the opener layer of a SAK for all kinds of miscellaneous things at least as often as the blades, if not more so.
When I actually DO need to cut something, it is opening a package or a product's packaging 95% of the time. But I find myself putting a lot of emphasis on a SAK's ability to handle screws (especially Phillips) when deciding whether to buy one. Hence my love for the Rambler!
But it's interesting - the world has changed a lot even in my lifetime so far. I'm 40 years old and spent almost my entire childhood in the "analog" era before this more "digital" one came along and changed everything. Having a blade is still useful, of course, and I am often glad I have one in my pocket. But how many blades do I actually need? I find myself needing non-cutting tools just as often as cutting tools these days it does have an effect on which SAKs I tend to use and carry on a regular basis.
Sorry to go off on a tangent there but I thought your comment was really interesting and it got me thinking about the tools I regularly need, something these challenges also get us to think about.
-
Day 6: Peeler makes a decent tea bag puller! Not as good as the scaler but it does the trick ☕☕

-
Day 6, did not use exec for anything particular today. However I did play around with the scissors. Think I like this size just as much as much as 84 or 91 mm versions.

-
Day 06. Cut the wrap on some water bottles and open a new box of fat balls for the little birds. They’ll need it this week as the mercury drops.

-
I agree Phil
. -
@BPRoberts said:
Day 5Cameo by one of my spares Executives today, since it was closer when I went to take a pic. These are our groomsman gifts (blue and orange for our wedding colors, and KaBob for our names Katie and Bob).
General Quote: Everybody that I've ever seen that enjoyed their job was very good at it.
Very cool, Bob!
If you ever need a nother groomsman, I'm available....just sayin'.....

-
@aicolainen said:
I'm not sure what year this tool was brought to market, but the more I think about it, the more I feel this is a product of a lost time. And I wish it wasn't so.
Just think about it, of its 5 main implements, 4 of them are cutting tools. It's literally insane in today's world, where we've sadly been deprived of most cutting tasks. I mean, really, many of us hardly has the privilege to cut anything anymore.
The weird splash of nostalgia you may be subjected to by changing out your pocket tool for a couple of days.I suspect you are right!

-
Day 06:
Had to do a good bit of walking today in -10ºC weather. At one point, I stopped for a hot coffee at a local café, the cold weather being the perfect excuse for some hot java. The tip of the nail file was used to enlarge and improve the vent hole on my disposable coffee cup's lid. (Should have packed a proper mug in my bag.....
)
-
@Nix said:
We're going to return it to REI. But...Mrs Nix was able to order a smaller (XXS) size directly from Ruff Wear. Take a look at the Ruff Wear site, they have a variety of jackets and some in smaller sizes.
Glad to hear.
Ruff Wear are similar to many others in that the size that fits his neck and girth is short for his body. His length is about 18in and most jackets for his girth are less than 15in.
I did find him a nice jacket from GF Pet that is a pretty good length.
-
Day 6
Missed getting any action shots today, but did use the Exec a few times. Here's a picture of it in its natural habitat on my keychain.
General Quote: Never wait for trouble.

-
Day 6
No use so just a picture of the Executive with my dog walking fanny pack.

-
Day 6:
No uses today so here’s a picture of the Executive hanging out in the Christmas tree!
[attach id=0 msg=2384067]

-

DAY 06
Found this old Chuck Yeager footage and thought it’d be cool to post it..
***1947 First Supersonic Flight: "Breaking the Sound Barrier" Chuck Yeager in the Bell X-1
Used the small blade to cut a seal on the side of this jar. Then used the scissors to snip a tag off some new jeans. I did need to use the straight pin from my SwissChamp to open a Sim card door on a new phone.


-
@CM Yo said:
I figured Yellow as I can't find Purple scales.
@Nix said:
Had to do a good bit of walking today in -10ºC weather.In such weather, I remain indoors as much as possible!
@Explorer said:
Found this old Chuck Yeager footage and thought it’d be cool to post it..

An awlsome Day 6!

Day 6
Used the small blade to gut an Orange-Striped Amazon White and the scissors to dispatch some pesky plastic staple things.
[attach id=0 msg=2384098]
[attach id=1 msg=2384098]
[attach id=2 msg=2384098]
.jpg)
.jpg)
.jpg)
-
@marlowe221 said:
You're right about cutting tasks. In the Victorinox reddit, I often see people touting the Explorer and Deluxe Tinker as great EDC SAKs. And they are, even if they are a little bulky in some ways. But I wonder if people say that because those SAKs feature more tools for opening/manipulating things (screwdrivers, pliers, magnification, etc) versus actually cutting things. For myself, I use the opener layer of a SAK for all kinds of miscellaneous things at least as often as the blades, if not more so.When I actually DO need to cut something, it is opening a package or a product's packaging 95% of the time. But I find myself putting a lot of emphasis on a SAK's ability to handle screws (especially Phillips) when deciding whether to buy one. Hence my love for the Rambler!
But it's interesting - the world has changed a lot even in my lifetime so far. I'm 40 years old and spent almost my entire childhood in the "analog" era before this more "digital" one came along and changed everything. Having a blade is still useful, of course, and I am often glad I have one in my pocket. But how many blades do I actually need? I find myself needing non-cutting tools just as often as cutting tools these days it does have an effect on which SAKs I tend to use and carry on a regular basis.
Sorry to go off on a tangent there but I thought your comment was really interesting and it got me thinking about the tools I regularly need, something these challenges also get us to think about.
Thanks for your elaborate comment.
I very much agree regarding the toolset preference. I would even like to see more models without knives. And SAKs with more than one knife blade is hard for me to even consider. Not because blades has become totally useless, far from it. They're still useful enough that I usually carry a dedicated folding knife, but when you on top of that mix and match a couple of MTs for optimal tool selection, the knife redundancy can quickly become ridiculous. It's sometimes (sadly) also nice to have knifeless options for legal reasons.
Deliberate mixing and matching of MTs is probably something only practiced by a small subset of nerds like us, so there's probably not a big incentive for the makers to make very specialized knifeless MTs. Thinking back to when I was a total noob myself and had a crush on the OG LM supertool, it was because it had the biggest and most of everything. Those types of tools are probably still hottest sellers in the noob demographics :)
Outside of these challenges, I usually carry a Cadet as my office MT. The can opener is ground down to make the 3mm slotted more useful for hard to reach screw heads. And with the large slotted and the 2D-ish philips provided by the file - it handles a surprising amount of the not so well planned needs in a very conveniently sized package. Still I try to come up with ideas on how to improve on this, i.e. even more driver tools, possibly pliers and/or a disposable blade holder, without going up significantly in size and weight. Another tangent, but those are my thoughts and I can't help thinking about this stuff ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

