Recruit vs Cadet
-
Interesting you say Cadet 2, thats the one I have. I like it but I seem to carry my Recruit more. Great SAK and love the Red Alox one I have but I lean towards my Recruit more.
Its neat to read all the responses. Good thread.

-
Recruit for me, just that bit thicker makes it worlds more comfortable and the t &t come in handy .
-
Cadet for me, I don't really "get" the Recruit. When I want slim (and classy) I'll take the Cadet. If I don't mind the extra bulk of the plastic scales, I'd much rather have the back tools of a Sportsman or a small Tinker. To each their own I guess.
-
You're definitely right - the low profile of the back tools of a Small Tinker make it awfully close to the Recruit in terms of how it feels in the hand, etc. And while there's an argument to be made that the back Phillips isn't that useful (and the awl isn't ideal in that position either), at least they are there and not bothering you much even if you never touch them.
-
I'll abstain from voting. I own neither a Cadet nor a Recruit, and I don't believe I could pick one or the other.
-
Between the Cadet and Recruit, I'd go with the Tinker Small :D
Cadet is very thin in hand to use and the omission of scissors while including nail file irks me to the point where I built a Cadet X, which is slightly thinner still than the 2-layer cellidor 84mms, but feels better in hand than the Cadet and has an near-perfect toolset.
Tinker Small feels almost identical in-hand to the Recruit but adds T-Phillips, Awl, and the pin -- yet same thickness and only a hair heavier.
If you want a nail file, then pairing the Tinker Small with a Classic SD Alox, being so thin as to have effectively zero carry cost (can even be kept in a wallet), gives both scissors and nail file (which IMO should be together... most urgent nail issues for me are hangnails or cracked, both of which need scissors).
If I had to choose between Cadet and Recruit, I'd go with Cadet because it's a much slimmer carry (8mm vs 14mm) and cleans up really easily.
-
I’m with you on the combo. My vote for the Recruit was absolutely with the idea that my Rambler would also be in my pocket.
But I like the Small Tinker too and think the back phillips definitely has its place despite any flaws it may have.
-
Both useful to carry.
But one is more of a " gentleman's" knife and one isn't.I didn't vote.
-
Looks pretty decisive so far. I know Alox seems to be the tougher material but being able to change out scales is a nice refresh to any old haggard SAK. Also, of all the SAKs I've seen at the flea market that were clearly abused few has scales that were totally goners.
Not trying to change anyones opinion just saying celidor is tough enough for what a SAK does.
-
See that’s the thing, you have to learn to love and appreciate your tools whether there plastic or metal, take care of it, clean it and oil it, and not be some garage junky that just slams it in his toolbox after every use without cleaning the grease off of it because they just don’t care,
What’s the #1 rule when borrowing someone else’s tool? No mater what it is? You return it in the same if not better condition that you got it in! Unless you broke it, then you simply get a new one, thus returning their tool in even better condition!
JR -
32 years of Huntsman carry with the same scales? I agree 💯 Aloha!
-
I will say that I do really like the nail file on the Cadet/Sportsman and I wish it appeared on more models. I wish there was a back tool-less version of the Sportsman, for instance, in Cellidor.
I was just saying in another thread that, for me, multiple blades on a single SAK is often kind of redundant. And since I also always have a 58mm on me too... there's another blade!
-
While I can appreciate the file on the 84mm Vics and 85mm Wengers I am almost never without my Manager. Which is why I can sometimes forgo scissors. I'd rather not since the 84/85/91mm scissors are so terrific.
Back to the Cadet or Recruit, I only have a Cadet 2 so for me its very much a comparison. I can appreciate the thinness of the Alox Cadet 2 I have but its not something terribly important to me.
I do have a question or 2, are the tools thicker on the Cadet vs Recruit? Anyone got calipers? Mine need a battery.
I can appreciate both and because we are voting I voted Recruit.
-
Just using my Mk. 1 eyeball, the tools on the Cadet and Recruit appear to be identical in every way other than the small blade versus nail file.
-
makes sense. -
I like the sportsman/cadet file enough that the sportsman completely replaced my spartan. I love the small blade and use it more than the big blade if I have it, but for a 2 layer EDC I think having another tool in that spot is more useful. Also I find the awl incredibly useful for cleaning nails, scraping, rough cutting so much that going to cadet or recruit is hard.
My only Wenger is a traveler, which I think is amazing aside from not being a familiar Victorinox. A climber with the file in place of the small blade would be very cool.
It is shallow but I also prefer the less serious non military name of the sportsman.
-
Despite my love for the Recruit (and my vote for it over the Cadet), I have really come to appreciate SAKs that replace the small/second blade with another tool over time. Especially since I also have a 58mm SAK in my pocket at all times - there's the second smaller blade!
It's one of the things I have come to appreciate about the Delemont line too.
My objection to the Cadet has to do with size (it's too thin!), not the tool set.
-
I have one Sportsman, two Recruits and five or six Cadets. I guess that makes me a Cadet guy but I would not be without all three. Each one has advantages that work better for some situations, I suppose. I don't really like pocket carry for saks over 3 layers, so my collection is mainly subtle gradations in two and three layer knives. The Cadet is very durable, so I often carry a silver one in situations where it might rub against something else, like keys. If I expect to do a lot of cutting it would probably be a Recruit or Sportsman, because they feel a little better in the hand, say if I were breaking down cardboard boxes or something. I'm finding it hard to vote because I like both.
-
Not to derail too much, I have a 84mm Golfer that I'm really trying to love. In theory it should be perfect. I also have a Salesman and again in theory it should be perfect. My Security 14 is. I love everything about this SAK. It has the locking main blade vs Travelers non locking. I got mine very used so the main blade has been sadly over ground. Its got a lot of life in it tho and it sees a lot of pocket time. The Salesman got shelved as a result.
50ft trad aka aimlesswanderer if I recall praised the Traveler. I finally got one and BAM! I understood. Over the years I prefer the corkscrew to phillips when heading out. Phillips is great at home. I like to have my mini driver with me at all times when out.
Because of my consistency with my Manager I can get away without scissors. I'd rather not but its doable. I'll hope to find a Sportsman but I'd also be happy with a Wenger Commander, Apprentice, or a Viking.
Back to topic. Sorry just thinking out loud.
-
It makes perfect sense for the Sportsman to come up in a thread about the Recruit versus the Cadet!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
