84 mm Golfer restoration
-
Hopefully it'll peen nicely. You've done a great job thus far!

-
Great updates. Keep posting!
-
I managed to match the bevel on the inner hole for the two pins that don't go all the way through the knife.




-
I had to start with the middle liner to accommodate the pins that don't got all the way through.




-
I forgot to mention that I used the corkscrew pin from a 91 mm three-layer junk knife.




-
I used another blade/combo tool back spring as a back stop to hammer the nail file pin without driving it through or bending the liners.




-
If you already noticed how close the nail file pivot hole is to the key ring, you're smarter than I am. >:(
I used the back spring again so as not to drive the short pin through to where it would jam the scissors.




-
Now we just need some scales. The split ring does fit, but you have to open the nail file carefully and it puts some sideways pressure on the file as it squeezes past.



-
Thanks for sharing. Great job!

-
I love all the in-progress pictures!
-
My scales finally arrived! They just needed a little sanding.


-
Into the vise and then into my pocket!



-
Nice Work!
-
Thanks! I first took it apart in July!
-
Good to the finished product with some great looking scales! Nice job!

-
Congrats on the finished SAK. I'm sure you'll enjoy considering the work put in. -
Thanks! It's already getting some good use.
These also have the pin slot, which I didn't realize was an option on 84 mm scales.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login