Huntsman Dragonfly mod
-
How do can i tell what year it is? I just ordered a used climber 91 mm for $11.50 before tax and shipping
-
I cannot tell you off hand however go to the bottom of this thread and use the SAKWIKI link, along the right side while in SAKWIKI there will be a topics in RED. Go to tools and then from there you can find scissors. The scissors link will have the changes made over the year which should help determine what you are looking for.
Again, I'm not familiar enough but the SAKWIKI is a great resource for such things.
Hope that helps.
-
Awesome thanks. As far as pinning the pivot hole on a dragonfly or Byrd, what size rod would i need for that?
-
2.5mm diameter (like the 91mm external pivots) it'll expand when you hammer it :)
-
Ok awesome. Ill have to order that tonight.
-
Hell never mind i already have them on the way. I ordered them to replace the pins i will have to drill and punch out.
-
Step one is complete. No turning back now. [attach id=0 msg=2384950]

-
Another consideration is, if you remove the blade layer and replace it with the old scissor spring/DF2 what are you going to do for scales?
I guess an alternative would be adding the new layer and making it a 5 layer knife.
-
I would like to keep the scissors. They are surprisingly useful. The scales are going to take the most consideration. Im thinking of doing blue g10 liners with titanium scales. But i may do micarta scales with the blue cross
-
G10 liners sound great. Gosh Micarta or Ti
. How the heck could I choose? Not that you're asking. Hmm,
. Great pics so far. Glad you've taken the plunge.For sure I'd also keep the scissors.
-
I would love to splurge on a set of daily customs buuuuut idk if i can drop that on some scales
-
I just realized i need a small brass pin.
-
Well i guess ill go with the Byrd Robin 2 over the DF2. Watch him reprofile ths blade and didnt have to pin it. It fit in the 2.5 mm rod. He did t have to grind a spring though. It was a deluxe tinker (also 91mm). So confusing lol
-
Be careful that he skip a lot of steps in the videos... There is a lot of little steps that are mandatory to success

-
Thats probably a good point. It as for as pinning that blade he didnt have brass in the center. I looked specifically for that
-
Nevermind he did. The brass just doesnt show up in the video
-
Yup, it's like being Sherlock Holmes to understand every each little details

-
Update on the Mod. Sorry for the missing pictures but i ran i to a damn headache with these things. So the liners are a pain to do. The g10 is so thin it feels almost impossible to get the knife back together properly. Making them myself is maybe out of the question. I managed to take my climber apart but the pins i ordered were so hit and miss. Some fit the holes some didnt so i ended up using the original pins and taking out the can opener, hook and bottle opener until i van figure out why they wouldnt go through the original liners. I ordered them
Straight from F2S’s Youtube link. I have the small pins ob order as well so i dont have to take one of the bigger ones to my sanding belt. My main issue was not taking nearly enough pictures to document how every layer should look. With the proper equipment it wont be as much trouble as i experienced trying it. Now i just have to get my Huntsman back together. In due time -
@LSUisSEC said:
Update on the Mod. Sorry for the missing pictures but i ran i to a damn headache with these things. So the liners are a pain to do. The g10 is so thin it feels almost impossible to get the knife back together properly. Making them myself is maybe out of the question. I managed to take my climber apart but the pins i ordered were so hit and miss. Some fit the holes some didnt so i ended up using the original pins and taking out the can opener, hook and bottle opener until i van figure out why they wouldnt go through the original liners. I ordered them
Straight from F2S’s Youtube link. I have the small pins ob order as well so i dont have to take one of the bigger ones to my sanding belt. My main issue was not taking nearly enough pictures to document how every layer should look. With the proper equipment it wont be as much trouble as i experienced trying it. Now i just have to get my Huntsman back together. In due timeThat is a bummer about the pins you ordered. I have found that making the liners and scales to be quite difficult as well. Despite lining up the holes perfectly, the deflection of the drill bit and other factors make getting the proper precision really difficult. There is a dismantled climber here /topic/81046 but I do not see a Huntsman.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login