✬ 2022 Chuck Yeager Memorial Challenge ✬
-
Day 14: Another day of riding around for us.

-
Day 14. A quiet day.

-
Before I went to pickup my sidekick, Patch helped me string up some beads

-
@marlowe221 said:
I will say that the 58mm version of the scissors are a little easier/safer around the nostril area than the 74mm version.I can do okay with the 74mm scissors, but you have a point.
@PitCarver said:
Patch helped me string up some beadsLookin' good!

@Explorer said:
Some really wonderful shots and uses by awl!

Day 14
No action shots, but I cut a piece of flannel to wrap a Camillus 27 in. The scissors did a tremendous job, even on the seams!
[attach id=0 msg=2385911]

-
Day 14:
I had an interesting use today!
[attach id=0 msg=2385928]
I didn’t use the Executive to take the back off the watch - needle nose pliers did that because it really needs a watch wrench and I don’t have one of those.
But I did use the end of the nail file to lift out a white plastic cover (to keep out dust?) so I could get to the battery.
And then…
[attach id=1 msg=2385928]
I used the toothpick and tweezers to actually get the battery out.
Here’s the front of the watch, in case anyone is interested. It’s a Wenger!
[attach id=2 msg=2385928]
I promptly discovered that I didn’t have the correct battery. But a quick trip to the store solved that problem. The project is now paused until I can get the kids to bed this evening.
I anticipate another use or two for the SAK this evening. First, I have to get the new tiny battery into the watch. Then, I have to get a small rubber gasket back into place before the back can go back on the watch. I expect the toothpick to be useful for both steps.



-
Great challenge awl, been following along.
Would’ve joined you again this year but after the Minichamp challenge I fancied more varietyThought you might like to see this alox Executive from the 1960’s, note the Swiss cross in the VIC logo not joined to the edge of the shield

Shameless plug - come and take a look at the 30 SAKs in 30 days challenge I’m doing this month, some interesting models and rarities for your viewing pleasure 8)

/topic/90195
-
Day 14
Opened a snack

-
@marlowe221 said:
Day 14:But I did use the end of the nail file to lift out a white plastic cover (to keep out dust?) so I could get to the battery.
The movement in your Wenger watch is rather unusually large for a quartz movement. It's nice to see, though. A full size quartz movement means the maker gives a damn and goes the extra length to have the date window placed where it esthetically belongs, rather than have it mal placed or totally omitted, just to save on production cost. Typically quartz movements are a lot smaller than their mechanical counterparts, just because there's a lot less going on in a quartz movement. To utilize these movements in larger watch cases, the makers use plastic adaptors. This keeps the movement in place and it also secures the battery in place and keeps it electrically isolated from the case back.
In the picture below, I've opened up a rather small 38mm field watch fitted with a typical, and much smaller, quartz movement. At the very top of the picture, near the center, you see the white plastic adapter that's suppose to fill the void between the movement and the watch case, as well as wraps over the battery.

In your case (pun not intended), the watch and movement are matched in size, so the adapter function is not required, but the plastic cover still adds a bit of mechanical support to stabilize the movement (and battery) and absorb some shock.
-
Day 15 - 50% completed:
I've not been posting a lot, but this challenge is flying along a lot better than the MC challenge.The exec is still in my pocket, and performs fairly OK. Yesterday I used the tip of the file to open a battery cover secured by a small phillips screw. Surprisingly it was not quite as suited for this as the Cadet file, and I almost gave up in fear of stripping the screw. With lots of deliberation and downward pressure I did eventually manage to get the screw out without significant damage to the head, but the suitability for this type of task is questionable.
As predicted December is different from other months and pocket sized tools isn't really in demand, except for cutting tools, which the exec has no shortage of. I can't help feeling a bit under equipped with the reduction in driver capability, but so far it has proven to be inconsequential.
-
@marlowe221 said:
Day 14:I had an interesting use today!
[attach id=0 msg=2385928]
I didn’t use the Executive to take the back off the watch - needle nose pliers did that because it really needs a watch wrench and I don’t have one of those.
But I did use the end of the nail file to lift out a white plastic cover (to keep out dust?) so I could get to the battery.
And then…
[attach id=1 msg=2385928]
I used the toothpick and tweezers to actually get the battery out.
Here’s the front of the watch, in case anyone is interested. It’s a Wenger!
[attach id=2 msg=2385928]
I promptly discovered that I didn’t have the correct battery. But a quick trip to the store solved that problem. The project is now paused until I can get the kids to bed this evening.
I anticipate another use or two for the SAK this evening. First, I have to get the new tiny battery into the watch. Then, I have to get a small rubber gasket back into place before the back can go back on the watch. I expect the toothpick to be useful for both steps.
That's pretty cool to use a Vic tool on a Wenger watch!
-
Day 15

Touch up the two blades on the Executive with the new Lansky sharpener. I think the stones on this are really just 2nd grade(not close to the Spyderco Sharpmaker's stones quality), but the versatility and ease of use are hard to beat in this setup.
-
Great job Marlowe and nice looking watch!
@marlowe221 said:
Day 14:I had an interesting use today!
[attach id=0 msg=2385928]
I didn’t use the Executive to take the back off the watch - needle nose pliers did that because it really needs a watch wrench and I don’t have one of those.
But I did use the end of the nail file to lift out a white plastic cover (to keep out dust?) so I could get to the battery.
And then…
[attach id=1 msg=2385928]
I used the toothpick and tweezers to actually get the battery out.
Here’s the front of the watch, in case anyone is interested. It’s a Wenger!
[attach id=2 msg=2385928]
I promptly discovered that I didn’t have the correct battery. But a quick trip to the store solved that problem. The project is now paused until I can get the kids to bed this evening.
I anticipate another use or two for the SAK this evening. First, I have to get the new tiny battery into the watch. Then, I have to get a small rubber gasket back into place before the back can go back on the watch. I expect the toothpick to be useful for both steps.
-

@Echotech said:
Great challenge awl, been following along.
Would’ve joined you again this year but after the Minichamp challenge I fancied more varietyThought you might like to see this alox Executive from the 1960’s, note the Swiss cross in the VIC logo not joined to the edge of the shield

Shameless plug - come and take a look at the 30 SAKs in 30 days challenge I’m doing this month, some interesting models and rarities for your viewing pleasure 8)

/topic/90195
-
Day 15, comes in handy if you have a sticky key. Removes button without breaking retaining clip.

-
Day 14 (late)
Missed last night, oops. I did use the Executive to tighten up a cabinet door for a neighbor yesterday afternoon..
General's Quote: Now you've got guys in space vehicles, smoking along at thousands of miles per hour. Speed is relative.

-
@aicolainen said:
The movement in your Wenger watch is rather unusually large for a quartz movement. It's nice to see, though. A full size quartz movement means the maker gives a damn and goes the extra length to have the date window placed where it esthetically belongs, rather than have it mal placed or totally omitted, just to save on production cost. Typically quartz movements are a lot smaller than their mechanical counterparts, just because there's a lot less going on in a quartz movement. To utilize these movements in larger watch cases, the makers use plastic adaptors. This keeps the movement in place and it also secures the battery in place and keeps it electrically isolated from the case back.In the picture below, I've opened up a rather small 38mm field watch fitted with a typical, and much smaller, quartz movement. At the very top of the picture, near the center, you see the white plastic adapter that's suppose to fill the void between the movement and the watch case, as well as wraps over the battery.

In your case (pun not intended), the watch and movement are matched in size, so the adapter function is not required, but the plastic cover still adds a bit of mechanical support to stabilize the movement (and battery) and absorb some shock.
That's very interesting!
I will not pretend to know the first thing about watches. This one was a gift from my wife roughly 10 years ago. When we moved across the country last year, I lost it!
I found it again a couple of days ago but the battery was dead (of course!). Hence the surgery to replace it.
Unfortunately, I find the watch to be physically uncomfortable on my wrist. I think the problem is that I am between holes on the strap. So it's really too loose and I can't keep the metal back of the watch off that knobby bone on the outer part of the wrist. Maybe I should look into a new strap for it!
-
Day 15: Wrapping gifts with some Executive assistance!

-
nice shot Barry 
DAY 14 Late as well
Went off grid for a day and me phone was run out so my bad for being late.
Used the sissors on the black executive to snip some tags off a new pair of jeans. Here it is pictured next to this director that was a $14 ebay buy. It's sissors are early '70s the spring was broken I think it was a single
I've never replaced it bic I'm not sure how to get an old spring or if it would accept a modern 74mm spring.
might have to try to acquire one.

-
Sitting at the halfway point of the challenge has me thinking about things this year. As my oldest doesn't celebrate Christmas we'll have my sidekick from next Monday until after the first of the year.
I told the Boss Lady to channel all funds, that she had set aside for me, and make sure that all the grand kids had a Christmas. My sidekick is 3 and is starting to see the world around her, while her sister will turn 1 after Christmas doesn't know the difference.
[attach id=0 msg=2386067]
We took them all to see Santa, last weekend, and both the older ones wouldn't have anything to do with him while the 1 y/o just sat in his arms like who the heck is this reading a book to me. Kinda funny because I've got a passable Santa beard and other kids have stopped me in the past, believing me to be the jolly old elf, himself.
[attach id=1 msg=2386067]
I love this picture. 😀

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login