Mastercraft Advent Calendar 2022
-
It is Tuesday the 13th, which is more scary as an adult than Friday because it means you still have most of the work week to go!
But, since today brings us the biggest socket in this set (judging by the slots in the case anyway!) we are ready for anything- that involves an 11mm socket anyway!
@canadiantire @mastercraft.tools @mastercraft_tools #Mastercraft #mastercraftadvent #mastercraftadventcalendar #Advent #advent2022 #adventcalendar #adventcalendar2022 #tooloftheday #halfway #multitool #multitoolforum
.jpg)
.jpg)
.jpg)
-
Some very cool additions today!
A couple of Torx bits (T25 and T20) and a 1/4" hex bit!
The Torx are perfect for working on cars (very common sizes) and the hex bit will make assembling Ikea furniture a breeze!
Def
.jpg)
.jpg)
.jpg)
-
Good set of bits going now

-
Indeed it is!
I am really enjoying what this set is shaping into!
Def
-
@Grant Lamontagne said:
A couple of Torx bits (T25 and T20) and a 1/4" hex bit!I need to get more Allen bits, as well as some T6 and T8 bits. This is indeed shaping up to be a nice set!

If it wasn’t such a pain to get across the border, I'd be very tempted to see if Canadian Tire in Windsor has any of these remaining...
-
@Farmer X said:
I need to get more Allen bits, as well as some T6 and T8 bits. This is indeed shaping up to be a nice set!
If it wasn’t such a pain to get across the border, I'd be very tempted to see if Canadian Tire in Windsor has any of these remaining...
I did offer to ship them to anyone who wanted one! :D
Def
-
It's the 15th, which means it's the middle of the month, but as an Advent Calendar only goes for 24 days, it means we are well into the second half of the calendar!
And, speaking of fractions, it's another Imperial socket today, and I don't want to admit that I had to use a magnifying glass to identify it as the numbers are so darned small! :ahhh
But, in the end it turned out to be the 9/32" socket, which I am not sure I have ever used on any of my other sets, but I imagine I would need desperately if it wasn't included! :D
Def



-
You will have a great smaller socket set after this is over

-
Agreed!
It may even replace my old "traveling ratchet" set that I use for most things.
/topic/74233
Def
-
@Farmer X said:
You did, and I'm really regretting not taking you up on it. This is turning into a very nice kit!Yeah don't blame you!
Today's addition is super handy- three more Torx bits, a T8, T10 and T15!
That's one whole row of screwdriver bits full now, although I reserve the right to rearrange them as more come in.... if they come in!
Def




-
The regret increases...I could use a T8!

-
I am sure you could probably get a very similar set at Harbour Freight, Pep Boys, Ace or one of a hundred other retailers that you guys have, for a lot cheaper than we get! :D
Today's addition is a 1/4 " socket, which is very handy to have, but is a bit redundant as you can see, the ratchet has a 1/4" bit driver built into it, which does pretty well the same job as the socket.
Still, I am happy to have it as the socket could provide some much needed clearance in tight areas!
Def




-
Absolutely agreed. The pivoting head on this one is a great help too.
At least, I would imagine it is. I have pivoting, ratcheting box ends on my wrench set and they really come in handy, so I would imagine this would be the same.
Def
-
More screwdriver bits today, and the type to make any Canadian happy!
In addition to a large flathead, we also get two Robertson bits!

Def



-
more useful bits

-
Yes, and I am starting to get the distinct feeling that there will be no fine cheeses in this set after all.
Of course, there are still several days left....
Def
-
We are getting close to the end of the calendar here, and today we get our third last socket- at least, judging by the available slots!
Today's 5mm leaves us with only two empty slots and some space in the screwdriver section, so I guess that is a subtle hint of what is coming over the next few days!
The good news is that we will be well set to put together any toys or other gifts that need assembling on Christmas morning! :D
Def



-
Are the square drive robertson fasteners popular there? I've a few bit sets that came with those, I've never used one.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login