THE Crunch Owners Thread
-
Up until the situation with Russia, we had a member who sold these, loki_mobipe but with the trade embargo stuff I am afraid he hasn't had much luck selling stuff lately
he was the best source for those wrenches bar none
you might be able to look up parse wrenches for Leatherman on ebay and see what you can find and try always to get them in a pair as you will need 2 
Good luck in the search and glad to have you
can't wait to see the pics of the Crunch

-
@AStratev said:
Thank you for the warm welcome Poncho!
Can you tell me what wrench exactly do I need to find (because it is not standard to my knowledge and I feel lost)? Do I need to heat the screws before I try to tighten them again? I read that they may be factory treated with loctite.I will post some photos after work of my awesome Crunch

I do use a Knipex Cobra XS : it works perfectly for this job
-
@m47mu74nt said:
I do use a Knipex Cobra XS : it works perfectly for this jobI have not had the need to adjust any of my tools yet, but, do you need to use two wrenches or does one suffice? Oddly I have two of the Knipex variant you reference. I see the parse wrenches on the popular auction site - seems expensive for what it looks like, however, having the right tool for the job can make all the difference.
-
@MrToolJunkie said:
Never can have too many.Several months ago, the Crunch disappeared off of the Leatherman website and was not available anywhere to purchase. Though it did eventually make a glorious return, you never know when they will disappear forever. #juice So the time to hoard is now.
Says me.

-
@powernoodle said:
Several months ago, the Crunch disappeared off of the Leatherman website and was not available anywhere to purchase. Though it did eventually make a glorious return, you never know when they will disappear forever. #juice So the time to hoard is now.Says me.

Exactly!!! Although I don't see them getting rid of this tool seeing as how popular it seems to be and the posts on social media distraught when people thought it was discontinued.
-
@MrToolJunkie said:
I have not had the need to adjust any of my tools yet, but, do you need to use two wrenches or does one suffice? Oddly I have two of the Knipex variant you reference. I see the parse wrenches on the popular auction site - seems expensive for what it looks like, however, having the right tool for the job can make all the difference.so i have the wrenches. you might be able to get it done with knipex or other cobra pliers but you run the risk of damage, if not very careful, while gripping the screws.
the wrenches fully grip each of the splines and give you a non marring way to adjust them. And yes you need one on each side of the chicago screw. I have used the wrenches 2 or maybe three times. latest was to swap the pivot on a crunch to add a pocket clip -
@powernoodle said:
Several months ago, the Crunch disappeared off of the Leatherman website and was not available anywhere to purchase. Though it did eventually make a glorious return, you never know when they will disappear forever. #juice So the time to hoard is now.Says me.

i bought a second to rest in the drawer while I use the other
-
@cnlson said:
so i have the wrenches. you might be able to get it done with knipex or other cobra pliers but you run the risk of damage, if not very careful, while gripping the screws.
the wrenches fully grip each of the splines and give you a non marring way to adjust them. And yes you need one on each side of the chicago screw. I have used the wrenches 2 or maybe three times. latest was to swap the pivot on a crunch to add a pocket clipThanks! I will likely but a set at some point.
-
We might if you didn't have an extra in your drawer
;)Otherwise, carry on
:D -
@MrToolJunkie said:
Thanks! I will likely but a set at some point.if you were nearby (south dakota) i'd be happy to loan you mine if you had a need.
@MrToolJunkie said:
I too have an extra NIB to have just in case. Completely irrational, but, I am sure no one hear would judge me poorly. :)hoarding is not always irrational but it can get that way. When the Juice xe6 was $60 and available every day I only bought them when i needed them. When they weren't available new anymore I bought 3 xe6 and 3 Pro's, plus 2 cs4's 2 s2's, amd a kf4. Then they were available again and I bought 3 more xe6's <u>all because my wife loses one about every other year. </u>
-
Was wanting a Crunch but had a quick question...
If I tighten the bolt all the way on my vice grips, it doesn't open up super wide but I can use the tool kind of like regular pliers, without it locking (ie, to remove a fish hook, manipulate wire, that sort of thing). Can the crunch do something similar, or does the head always come apart every time it's opened?
-
Kinda both
While it is totally possible to use them as regular pliers as long as you don't open the mouth to much (or the head will pop out), it can be a little hard and frustrating to get it going.
Personally, I have them paired with Knipex Cobra 150, or a modded Gerger MP400 -
Received my Crunch today and am very happy with it. Always loved locking pliers since I was a kid and to get one this cool just floats my boat :D
Had one of the original Micras for a long time before it was lost (sad times). I replaced it with various other similar tools over the years but nothing really stuck and eventually bought a newer version of it.
Recently I've wanted to get something a big bigger for when I'm away and I was switching between a Wave+, Surge and ST 300.. the latter winning that race as I love the more vintage style looks and wanted something more heavy duty.
However since I have my replacement Micra I released that the only tool I'd really be gaining that I'd use in any serious capacity are the pillars and whenever you use pillars you can't beat locking ones so the choice was made. Still I might pick up a ST300 at some point to complete the set! [attach id=0 msg=2405317]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




