Who's down with OPTs
-
Nice OPTs and pics Sos and Adam

-
Gerber Shard (black)

-
Great pic, Adam

-
Fast recovery SurgeUK.
Nice additions from echotech and Sos. I missed that TTchopper at the time I bought mine. There were a few that were already discontinued at the time I found out about TTchopper.
That Keyport looks like a good OPT.
-
Nite Ize DoohicKey Ratchet





The ball detent on the bits helps improve on a problem that I have with other OPTs with bits, which is keeping the bit engaged with the OPT while turning a screw. This isn't perfect, but it does help.
-
-
@Adam5 said:
Nite Ize DoohicKey Ratchet




The ball detent on the bits helps improve on a problem that I have with other OPTs with bits, which is keeping the bit engaged with the OPT while turning a screw. This isn't perfect, but it does help.
I looked at this one a couple of times. Thanks for testing it.

It looks like it's made of rather soft metal. And replacement bits are not easy to get either

-
I believe you are right about the metal. This morning is the first time I have used it, and there were scratches on the straight driver after testing it with a screw.
As for the bits, I don't know how easy they are for you to get, but Dewalt and Klein sell dual bits with ball detent
-
I have seen those and wondered if they would be any good
thanks for testing it out :D -
In this pic you will see a key OPT made by MinuteKey:

I bought it on a whim one day at my local Lowe's.
-
Neat little impulse purchase!

-
Thanks, FX

Here is another Nite Ize Doohickey that you may find hanging around at a hardware store or auto parts store:

Again, it is a lightweight tool that could come in handy at some point.
-
These little tools IMO are worth their weight. Having seen a massive amount of knives at the flea market with broken tips or completely snapped off blades which could have been avoided with a OPT.
I rarely open bottles and most who do can usually open them with most anything so the bottle open feature is meh. The scrapping, prying, turning of screws, and anything else a knife blade is not meant for is is why I love these little tools.
-
I should be taking a run to Home Depot on Friday, so I could look for one of those Nite Ize tools. And good point about OPTs being suited for things knife blades are not...I broke off at least one tip when I was a dumb kid.

-
also 
-
Here is an OPT from the Utility Series sold at Walmart. Meh... I think the Nite Ize and True Utility OPTs are better than this.

Let's not forget the barely detectable and entire ineffective "file" on the back of the tool:

-
Here’s a circa 1970s (my best guess) OPMT called the GasHopper. I picked it up at a flea market for a dollar or two.
The primary function appears to be holding up the handle on a gas pump (which presumably dates it to a period after automatic shutoff became common but before the integrated clips were widespread), and it features three different flow rates.
In addition, it has a bottle opener, can opener, flat screwdriver, and hole for keychain carry.
It is quite thin by modern OPMT standards, but seems well-made.


-
Thats neat. Sure beat standing there holding the pump in cold weather.
-
That's an interesting OPMT, nate

Thanks for sharing it
-
@Adam5 said:
Here is an OPT from the Utility Series sold at Walmart. Meh... I think the Nite Ize and True Utility OPTs are better than this.
Let's not forget the barely detectable and entire ineffective "file" on the back of the tool:

I have to backtrack just a bit in my assessment of this tool. My apprentice was having a hard time removing the grille of a ceiling speaker that needed to be demoed. So, I jumped up on the ladder and quickly saw that something thin was needed to slide in between the grille and the outer ring of the speaker so that the grille could be levered out.
I had two things on me I could use. My knife
or this cheap OPT that was in my Maxpedition 
I used my pliers to tap the tool in the space between the grille and ring and then popped it out

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
