Show off your Sak mod's!
-
-
Nice set,,
JR -
Some lovely mods there - the antler and polished steel both look amazing even though they are about as different as they could be! I’ve just finished a cadet X done the ‘easy’ way with Delemont scissors - like it but have also got a 84mm huntsman small underway which I am attempting with modded 91mm scissors and spring. Not seen that model done on here (although that’s not to say it hasn’t been!) and I think it’ll be a little cracker if it turns out ok. Have had to make some of the liners from brass so a more difficult mod all round than this one…hopefully not to much so for my limited skill set and tool set!!!


-
Nice Alox mod HB 👍
I must say it’s more about the perseverance and patience than the skills and tools!
-
Beautiful work Samek, excellent looking peening.
YAlso very nice HB, and great color too. I have a set of these scissors and a spare recruit spring kicking around. I have just been wresting with making a salesman, sportsman x, cadet x, or golfer with a phillips. Too many options so I might just buy more wenger scissors.
-
All of those would be worthy very usage…only problem I’d have would be pulling apart the recruit (one of my favourites) in the first place…but I’ve said that about multiple compacts previously too!!
-
@Max Stone said:
My first attempt at an 84mm build using 91mm scissors - the Golfer. Had some very old European stag horn that's was earmarked for the bin during a clean-out. Dates from around the 1930's shot by my grandfather somewhere in Austria. Glad I could repurpose them. I took some photos so will look at doing a separate thread on the build process.
[attach id=0 msg=2390969]
[attach id=1 msg=2390969]magnificent mod, a beautiful sak.
Congratulations -
Just a test, 84mm Walker with saddle leather scale with burnished sides. The colour and warmth of leather makes this very tactile.
The test piece was made by a leather worker in the UK, just from a photograph, no liner or plastic scale to use as a pattern. Pretty good fit. Leather is same thickness as Victorinox scale.

-
Hey guys,
I though I would just show my very first 2 SAK mods.
I wanted 2 knives:- A thin one that could be used for urban EDC and that would be the most versatile for the basic stuff I do
- Another a bit thicker (but still carryable) that would have the basic stuff I need everyday at home but also for basic outdoor stuff like being in the woods, picnics, etc…
So for the first one I opted for the Junior Mechanic
It has a main blade, the combo tool that acts as a flat head screw driver, the Philips screw driver, and then the pliers that are useful to pick up small items my hands can’t reach.
It also has Swiss Bianco titanium plus scales with pen, toothpick, tweezers and pin.
I anodized them blue with satin on the flats.For the 2nd one, I started from the Explorer that has the nice inline Philips screw driver.
Replaced the main blade with the serrated one from the serrated Spartan
Replaced the hook with the one with the diamond file from the Compact.
Added a saw.
Added the TortoiseGear FireAnt kit
It has Titanium scales from Aliexpress with toothpick and tweezers.
I stonewashed the scales, anodized them bronze with satin on the flats.All in all, I took my time, did everything slowly but surely and everything turned out great and I am very happy with both.
Started from
Compact
Serrated Spartan
Explorer
Deluxe Tinker
HikerEnded up with
Custom Mechanic Jr
Custom ExplorerAnd then
Spartan
Climber
Super Tinker
That I can use as giftsAll the parts have been used, nothing was wasted ;)
Fun fact: other than the toothpick and tweezers, there is not a single duplicate tool between both Customs ;)












-
Excellent work, they look great

-
Fantastic looking mods. Well thought out tool load on each of those. I’d be happy carrying them any day.

-
Nice work! Looks not only useful but the finish are nice too
-
Thanks guys

-


I think I'll call this 'The Assistant'.
It's not really a SAK, more a SAP (Swiss Army Pen) ;)
I also EDC a 91mm, bladeless but with scissors, so I don't need the small scissors. And if I wanted a blade I'd carry my Pioneer-X.
-
bdpf79, those look very nice. I could see myself carrying that Jr Mech.

BePrepared, I love that SAP.
Seems like a very useful toolset for city life. -
Not a mod is such - more of a reconfiguration - but I reckon this is pretty much the main functionality of a Swiss champ in 5 layers by the time I get plus scales on it!?
Got all the cool tools (other than the wood saw) and sneaked a thinned out awl onto the saw layer too. Works for me!



-
A rebuild of a 1980s Swiss Champ. I had the original knife as a youngster and it was used and abused for years and then left in a tool box and forgotten until I rediscovered it and decided to take it apart for mod fodder. The bits found their way into several other models over the years but I recently decided none were quite as good as I remembered that original Champ….so I collected as many of the parts back together and rebuilt it as close to original as possible. Parts replaced are a new 2.4mm main blade and the brass scale studs from an old camper a couple of the liners and the scales. I think everything else including the round mini screwdriver is from the original. It’s a lovely thing, love the slimmer pliers, not so keen on the old style ( non stainless) file but the authenticity is more important in this one. Nothing feels quite like a Swiss Champ - an absolutely classic design…wish I’d done it sooner.


-
@Helvetica Bold said:
A rebuild of a 1980s Swiss Champ. I had the original knife as a youngster and it was used and abused for years and then left in a tool box and forgotten until I rediscovered it and decided to take it apart for mod fodder. The bits found their way into several other models over the years but I recently decided none were quite as good as I remembered that original Champ….so I collected as many of the parts back together and rebuilt it as close to original as possible. Parts replaced are a new 2.4mm main blade and the brass scale studs from an old camper a couple of the liners and the scales. I think everything else including the round mini screwdriver is from the original. It’s a lovely thing, love the slimmer pliers, not so keen on the old style ( non stainless) file but the authenticity is more important in this one. Nothing feels quite like a Swiss Champ - an absolutely classic design…wish I’d done it sooner.Great story and SC.
The grey magnifier and old pliers.

-
@trouthunter said:
My latest mod is a Spydernox with, yes, Econo Scales.@trouthunter said:
New custom painted scales. I could not fine 84MM Plus scale let along 84MM Plus scales in the right shade of blue. So I made some.That is awesome and the newly painted scales make it even better.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




