CANOES (knife pattern)
-
You're about ready for a family photo. Like the wood on that one. Wood and brass are down right sexy. 8)
-
Yes, a family photo would be great!
-
@Aloha said:
You're about ready for a family photo. Like the wood on that one. Wood and brass are down right sexy. 8)As requested, a gathered the bunch and took a few pictures for your review. Buck, Queen and Rough Rider, both old and new. And then found a single Case hiding amongst some Sod Busters.
[attach id=0 msg=2399464]
[attach id=1 msg=2399464]
[attach id=2 msg=2399464]
[attach id=3 msg=2399464]




-
And the CASE
[attach id=0 msg=2399465]
-
Wow, nice collection! You really like those Bucks!
JR -
@MadPlumbarian said:
Wow, nice collection! You really like those Bucks!
JRThank you JR!🌹
Yes, I do! Buck uses a hallow grind on the blades. IMHO, they use a sturdy blade stock, and with the HGrind, avoid the taper, yet allows for a very keen edge to be applied for maintaining sharpness while using.
Plus I like the care that appears to be exhibited on mounting the wood grain patterns onto the frames. They are centered yet no two appear identical.
The faux stag handles are varied as well.
I was fortunate to find a real Stag model as well a a Blue dyed Bone model.This is one model I do not understand why Buck does not or ever made in the USA. 😔
-
Back in the day I had an all stainless steel knife, I don’t remember the name on it but I liked it, I could probably draw it from memory, but back in the day it was my fav, it was a simple pocket clip liner lock, yet the blade was ok sharp, but one day my step father who was a master carpenter needed a knife to cut something open so I handed him y blade, later that day he asked me for it again and said it would be a while, he had like three wet stones sitting in special troughs soaking up, these things were huge, like 4 x 12, I had no clue what the heck he was going to do I was back in my teen hood back then, all I’ve ever seen him do was use these for his special chisels, needless to say about an 2 hours later he handed it back after polishing it up a little and said “careful, it’s not a toy” I was like no crap it’s a knife, so I walked off and opened it up to look at it to see just what did he do and saw nothing, so I was like whatever, but the next time I went to cut something it freaking sliced through it like freaking butter! I was like OMG, I held the knife at a distance and looked at it again and was like what the heck did he do to this thing, like WOW! I cut something else and I didn’t even need to apply pressure I was just shocked! Like I said I don’t remember what manufacture it was but that thing could do surgery!
JR -
That is a cool memory JR.
My dad was a commercial painter, and growing up met many of my dad’s friends who were also tradesman, carpenters, masons, electricians. They all bartered their skills for services. My dad would paper or paint the dentist’s kitchen or bathroom, in exchange I or my siblings would get dental work.
But, I was always fascinated by a couple of carpenters who did specialized moldings and trim work requiring carving patterns. My dad would do the staining and varnish finishing on their projects. And I remember handling a chisel ONE time! I ran my thumb nail along the edge, it cut through to the nail bed. He looked at me and said, “you won’t do that again, will you?” Was always curious how he maintained them so sharp.
-
What a magnificent collection. Bravo. Thank you for taking the time to assemble them. Neat you found the case and of all places :D.
I do love Bucks Hammer/Knife shield. One thing for certain, RR gives everyone a chance to own a good looking affordable knife. One that'll do what its intended to do.
-
@LoopCutter said:
That is a cool memory JR.My dad was a commercial painter, and growing up met many of my dad’s friends who were also tradesman, carpenters, masons, electricians. They all bartered their skills for services. My dad would paper or paint the dentist’s kitchen or bathroom, in exchange I or my siblings would get dental work.
But, I was always fascinated by a couple of carpenters who did specialized moldings and trim work requiring carving patterns. My dad would do the staining and varnish finishing on their projects. And I remember handling a chisel ONE time! I ran my thumb nail along the edge, it cut through to the nail bed. He looked at me and said, “you won’t do that again, will you?” Was always curious how he maintained them so sharp.
Oh yeah, those monsters you would call “chisels” he had all sorts of them, and you could freaking shave with them!
JR -
Thank you Aloha! It was my pleasure

Yes, the hammer shield is my favorite as well.
It awl started with the white faux stag Buck.
I will say that the older Rough Riders I have found are very nice. The newer models Rough RYders are nice, yet a bit on the fancy side. Good modern materials for cover and stamped R bolsters make them pretty for displaying.
The QUEEN models I have are very nice, reasonably priced, well built and very usable.
The Sawcut bone and the WINTERBOTTOM bone are real bargains for new knifes.Just MHO😔
-
That's a heck of a nice armada!

-
[attach id=0 msg=2401221]
Buck Woodgrain cover[attach id=1 msg=2401221]
Older Rough rIder, textured scales[attach id=2 msg=2401221]
Denim Micarta with Swedged blades.


-
-
Trying to catch up and include new arrivals,
This 2007 arrived this week, and it is missing the Hammer/Knife/Nail shield. But the Red jigged bone is stunning to these old eyes.
[attach id=0 msg=2403645]
[attach id=1 msg=2403645]Hopefully BUCK will the Hammer shield available to make the scale whole!


-
Nice one!
Hope you're able to get a new shield for it. -
[attach id=0 msg=2404694]
2008 Buck in NOS package.
I had not seen one before finding this set!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login