What did you use your Leatherman for today?
-
Yesterday I posted in the SAK use thread about using my Explorer to fix a bracket on a chair seat. Today I sat down and it wobbled and another screw fell out. After cursing myself for not just checking all the dining room chairs last night, the kiddo and I got to work. All 6 chairs he helped flip over and check screws/bolts. He “helped” drive screws and bolts and is getting pretty good getting purchase on the head, nothing stripped at least.
[attach id=1 msg=2400161]
Used my Electrician to bore a new starter hole to move the bracket for all stripped seat screws.
[attach id=0 msg=2400161]Then ratchet action. Tightened a few not yet stripped. 4 per chair.
[attach id=2 msg=2400161]More ratchet action to tighten all hex bolts. 12 per chair
[attach id=3 msg=2400161]



-
@McStitchy said:
Had the OG Super Tool used at a door lock fix today. Only the Phillips driver though.
A Vic.Ranger and Gerber Shard did their part too. I forgot to take pics of the grinding and filing action.




Great use McStitchy. Those back spring SAK chisels are always helpful.
-
Awesome pics and use, G_B 8)

-
Thanks, Poncho and Farmer

-
@Grand_Banana said:
Great use McStitchy. Those back spring SAK chisels are always helpful.
Excellent chair repair action from your kid GB

-
No picture because I was balancing on top of a semi trailer but used Surge pliers to fix the downspout on a auger so we could finish loading soybeans today.
Here’s one once everything was sorted.
-
Great picture !
-
still think you could have tried to get a pic though
:D -
@HarleyXJGuy said:
No picture because I was balancing on top of a semi trailer but used Surge pliers to fix the downspout on a auger so we could finish loading soybeans today.Here’s one once everything was sorted.

-
Excellent chair repair action from your kid GB

Cheers, McStitchy!
@HarleyXJGuy said:
No picture because I was balancing on top of a semi trailer but used Surge pliers to fix the downspout on a auger so we could finish loading soybeans today.Here’s one once everything was sorted.
Nice use

-

My Wave+ did a fantastic job of trimming the ends of my new guitar strings. In fact, I’m not sure I’ve ever used anything other than a Leatherman to cut the dangly ends off of new guitar strings.Sent from my iPhone using Tapatalk
-
Great pic, cd 8)

-
A wave blade is good for a quick snack

Had some peanut butter and leftover cheese
-
I used my Wave saw and file for making a makeshift tools from one time use chopsticks, so that I can clean the corner of a bottle as in the image


-
I noticed my hose cart was leaking. I used my Rebar Phillips to take it apart and tighten up the fittings. The Rebar Phillips was able get to the recessed screws where my Wave would have been useless. The Rebar is my go to multitool now, I just love the simplicity and non pinchy pliers compared to the Wave. I will have to get in on the next Rebar Challenge.

-
@Steelej1976 said:
I will have to get in on the next Rebar Challenge.
Definitely. As great as last month's Rebar challenge was, I'll be back for another!

-
Wishing you all a happy weekend

I've repaired a door bolt latch thingy today with the ST300 doing most of it. Looks like it wasn't installed very well in the first place. And while the door warped over time the stress on it grew. So it moved and bend out of position and the slim sheet of wood cracked. Maybe something else happened too here

Pliers were used to bend it into form again and to assure all is back in place...


Some wood had to be removed to make it sit flush in...

Now I needed an idea how to improve the stability of it because gluing the wood back on and using new screws would not be enough I thought. Luckily I found a spot at the latch where I could pass a screw through without blocking the mechanism. Holes were drilled and a suitable screw found...

Glued the wood back together...

Screwed it all in...

And it works....

It's rock solid now!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login