Show off your Sak mod's!
-
bdpf79, those look very nice. I could see myself carrying that Jr Mech.

BePrepared, I love that SAP.
Seems like a very useful toolset for city life. -
Not a mod is such - more of a reconfiguration - but I reckon this is pretty much the main functionality of a Swiss champ in 5 layers by the time I get plus scales on it!?
Got all the cool tools (other than the wood saw) and sneaked a thinned out awl onto the saw layer too. Works for me!



-
A rebuild of a 1980s Swiss Champ. I had the original knife as a youngster and it was used and abused for years and then left in a tool box and forgotten until I rediscovered it and decided to take it apart for mod fodder. The bits found their way into several other models over the years but I recently decided none were quite as good as I remembered that original Champ….so I collected as many of the parts back together and rebuilt it as close to original as possible. Parts replaced are a new 2.4mm main blade and the brass scale studs from an old camper a couple of the liners and the scales. I think everything else including the round mini screwdriver is from the original. It’s a lovely thing, love the slimmer pliers, not so keen on the old style ( non stainless) file but the authenticity is more important in this one. Nothing feels quite like a Swiss Champ - an absolutely classic design…wish I’d done it sooner.


-
@Helvetica Bold said:
A rebuild of a 1980s Swiss Champ. I had the original knife as a youngster and it was used and abused for years and then left in a tool box and forgotten until I rediscovered it and decided to take it apart for mod fodder. The bits found their way into several other models over the years but I recently decided none were quite as good as I remembered that original Champ….so I collected as many of the parts back together and rebuilt it as close to original as possible. Parts replaced are a new 2.4mm main blade and the brass scale studs from an old camper a couple of the liners and the scales. I think everything else including the round mini screwdriver is from the original. It’s a lovely thing, love the slimmer pliers, not so keen on the old style ( non stainless) file but the authenticity is more important in this one. Nothing feels quite like a Swiss Champ - an absolutely classic design…wish I’d done it sooner.Great story and SC.
The grey magnifier and old pliers.

-
@trouthunter said:
My latest mod is a Spydernox with, yes, Econo Scales.@trouthunter said:
New custom painted scales. I could not fine 84MM Plus scale let along 84MM Plus scales in the right shade of blue. So I made some.That is awesome and the newly painted scales make it even better.
-
@Max Stone said:
My first attempt at an 84mm build using 91mm scissors - the Golfer. Had some very old European stag horn that's was earmarked for the bin during a clean-out. Dates from around the 1930's shot by my grandfather somewhere in Austria. Glad I could repurpose them. I took some photos so will look at doing a separate thread on the build process.
[attach id=0 msg=2390969]
[attach id=1 msg=2390969]That stag looks amazing and it will provide a great story and heirloom piece
-
Heres my latest prototype. I have been working on adding the phillips. Started with the double spring and can and bottle together but did not like the snap and other issues. So I decided to go at it using an older cap lifter and the phillips spring. Yes it is stubby now, but retains its function, and the 90 degree stop is more like 80. Since my previous attempt at leather scales has held up and I needed the cutouts for the awl and file, I decided to try again. Snap is great on everything, although the scissors are weaker than usual, which is kind of funny since it is the only unmodded layer. Getting the functionality but still working on the aesthetics.
[attach id=0 msg=2400691]
[attach id=1 msg=2400691]
[attach id=2 msg=2400691]


-
Trailmaster / Workchamp hybrid.
Liners removed, stainless steel pin bolts, ebony wood scales and scalpel welded on.[attach id=0 msg=2401579]
[attach id=1 msg=2401579]
[attach id=2 msg=2401579]
[attach id=3 msg=2401579]



-
Outstanding

-
-
As Mr MadPlumbarian requested you apparently need pictures of mods, and after lurking around and even getting good replies I figured it was the least I can do...
Yeoman using latest generation tools and oiled micarta plus scales. Bought the scales off Etsy and added the inlaid nickel silver cross to complete the oldcross vibe. Turned out even better than I hoped. All tools even have a decent snap to them.

[attach id=0 msg=2402378]
[attach id=1 msg=2402378]
[attach id=2 msg=2402378]
[attach id=3 msg=2402378]




-
Very nice
I’m glad it worked out, good snap back nothing loose? Be warned, normally once you do one your gong to want to do more! :D anyway it looks very nice I like the scales and the old school cross, nice touch!
JR -
Sweet yeoman

-
@MadPlumbarian said:
Very nice
I’m glad it worked out, good snap back nothing loose? Be warned, normally once you do one your gong to want to do more! :D anyway it looks very nice I like the scales and the old school cross, nice touch!
JRI'm sure there'll be others down the line and I have some ideas for version 2, but that will require custom tools to be made which feels a bit much for the moment... This was a lot fun though!
The snapback on all tools is surprisingly good, but I peened them very carefully checking after each hammer blow once the bushings stopped rotating. The hook is a bit stiff and hard to open, but I can live with that. The nail file is on the outside anyway and I have a feeling that will be the most used part of it anyway... ::)
-
Latest Spydernox Executive with Bohler K390 Blade.
https://youtube.com/shorts/6K5Pxl19zMA?feature=share




-
Nice mods everyone. That is a heck of an executive pa!

Heres a little scale tool mod I did last night on my climber. I am sure it has been done before but I have been meaning to try for a while. The scale file.
[attach id=0 msg=2402843] [attach id=1 msg=2402843]


-
I don't know if it's been done before but I'm sure I haven't seen it anywhere else. Nice work
-
@kottskrapa said:
I don't know if it's been done before but I'm sure I haven't seen it anywhere else. Nice work+1
Great idea and very well done! Congrats and thanks for sharing!

-
Got some black pen scales for my 58mm mod, from a well known Chinese site. And also used some spare parts to make another bladeless SAK.



Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





