March Rebar challenge
-
Nice photo, LC

I hope the cacti do bloom by Easter

-
Day 4
I forgot to take pictures of the Rebar in action this morning while putting together a trampoline at my daughter's house

It did a fine job. Only other tool I used was a hammer to drive the retention stakes into the ground. The Rebar handled the rest.
So, I am left with a photo of the Rebar after opening a new Dremel scrubber that will be used for cleaning my grills and griddle:

-
Day 4
More measuring...taking a weight management class and needed to make sure my plates were around 9 inches... mine are about 9.5 inches, so close enough. Smaller plates to help with portion control. Rebar ruler to the rescue.

-
Nice pic, Adam... never heard of a Dremel grill scrubber... sounds like a great attachment. My grill could use some power scrubbing.
-
@LoopCutter said:
Day 4 of 30The Coyote Rebar is still riding the belt👍
Today, maintaining my WIFE’s😔, Holiday Cacti!
Removing the dead and dried blooms from Christmas, and watering, hoping additional blooms will open for Easter😁
[attach id=0 msg=2403467]
Right now only one bloom present, last year near Easter three of the plants had enough blooms that my daughter thought I also had EASTER Cactus and visited several florist and plant shops searching.
My wife’s were awl Christmas Cactus but could gorse blooms at Christmas, Easter, Thanksgiving and Memorial Day!
Love the Coyote Rebar... great looking tool. Never thought to try it with plant pruning before!
-
Great pics today all

Hope that cacti bloom, LC and they are a great thing to have in memory of your wife

Love to hear more of this Dremel tool, Adam
I have bought something recently by this brand as well and will post about this week hopefully 
MrTJ, good luck in the weight management and portion control

-
Thanks, Poncho!
Half-way to my goal! -
Congratulations

-
<u>DAY 4</u>
Used the Rebar to open some seals on a Peli Case containing a number of VERY expensive shotguns today.
Not really professional to take pictures whilst working therefore, an equally important opening task was undertaken having arrived home. However, at 8.2 abv, not too many of these before bed


-
@LoopCutter said:
Day 4 of 30The Coyote Rebar is still riding the belt👍
Today, maintaining my WIFE’s😔, Holiday Cacti!
Removing the dead and dried blooms from Christmas, and watering, hoping additional blooms will open for Easter😁
[attach id=0 msg=2403467]
Right now only one bloom present, last year near Easter three of the plants had enough blooms that my daughter thought I also had EASTER Cactus and visited several florist and plant shops searching.
My wife’s were awl Christmas Cactus but could gorse blooms at Christmas, Easter, Thanksgiving and Memorial Day!
I bought Mrs Surge the same type of Cactus years ago and it's still going strong 
Here's a pic from the Daredevil challenge ;)

-
@MrToolJunkie said:
Love the Coyote Rebar... great looking tool. Never thought to try it with plant pruning before!Not pruning, used the Plier tips to extract dead blooms from the soil base, can see the dead but my fingers could not reach with damaging stems or leaves.
-
I love the Coyote Tan Rebars - IMO, it's the most attractive color combo Leatherman carries

-
-
Day 5
Thought I’d try the SE blade on kitchen duty, did the job and super sharp, but like all MT’s with the tools on the inside you lose a lot of blade length due to the handles with this type of task

-
Day 4
Taking the sawblade off my pole saw for transport.
[attach id=0 msg=2403547]

-
@HarleyXJGuy said:
Also switching it up for a snow day here in Michigan.You got snow today? We got sun. If only it was 20 degrees warmer...

@LoopCutter said:
Today, maintaining my WIFE’s😔, Holiday Cacti!Cacti are cool, as is that coyote tan Rebar!

@Adam5 said:
I am left with a photo of the Rebar after opening a new Dremel scrubber that will be used for cleaning my grills and griddle.I could use such a thing. Would be interested to hear how well it performs.
Not too many before bed is probably a wise idea. 13.2% ABV will put you out like a light in large quantities.

Great stuff, y'awl, regardless of the day you're on!

Day 3
The can's label gives you a caveat if using a can opener.
[attach id=0 msg=2403554]
That is exactly what I did.
[attach id=1 msg=2403554]
To hell with the pull tab!

[attach id=2 msg=2403554]
.jpg)
.jpg)
.jpg)
-
Day 3: Some home repair with the Philips screwdriver. This Challenge is on fire!! :ahhh

-
Great pics and uses so far, everyone!!!

-
Day 5
Got most of the snow cleared with some help from my modded Rebar.

Used it to open up some salt for the hill sidewalk that leads to the pole barn and for the front steps.

Adjust the carb on the snowblower.

And of course play in the snow.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
I would like some Coyote Tan LMs but, in the UK, availability is an issue ::)