March Rebar challenge
-
Good shot, Surge!
Day 18
No use, I've been out and I've just remembered I needed a photo. I'm "tired and emotional" (
) and this is as good as it's getting today. 

-
Day 18
Removing staples from some pressure treated Lumber. Pliers came in handy.

-
Lots of great stuff as always, guys :ahhh

-
Day 18 of 30
Been traveling most of the day today, so just a pic


-
Day 18 of 30
Been to a middle schools wrestling meet today, promising to video a son of a friend who has to work (nurse) today.
He took his weight class with a decisive pin within 30 seconds.
At home remembered the Rebar, and a apple was picked for a snack.
Rebar sliced and sliced …
[attach id=0 msg=2405855]
-
Day 19

-
Great pics LC and Echo

-
Day 18
No use today, yet, but Pic of bread I cut open with the serrated blade at an Italian restaurant.
[attach id=0 msg=2405889]

-
That serrated blade is a great bread cutter.
Day 17: No action yet.

-
Yet another great day!

Day 17
Time to test out the file. I took it to a corner (top right in the photo) of this go/no-go rivet gauge I made in AMT school. I did ten swipes with the double-cut side, then ten swipes with the single-cut side. Oddly, the file seemed to work better when pulled, which goes against what I've awlways done with files.
[attach id=0 msg=2405892]
Sometimes I get offers for "help" when taking photos of knives and multis. :D
[attach id=1 msg=2405892]
.jpg)
.jpg)
-
I have used the file edge as a metal saw for some light metal material uses. Just adds to the versatility of the Rebar.
-
I found that to be true too Dan. I used the file to repair the end of a bolt on a garden tractor and discovered the same thing.
@Farmer X said:
Yet another great day!
Day 17
Time to test out the file. I took it to a corner (top right in the photo) of this go/no-go rivet gauge I made in AMT school. I did ten swipes with the double-cut side, then ten swipes with the single-cut side. Oddly, the file seemed to work better when pulled, which goes against what I've awlways done with files.
[attach id=0 msg=2405892]
Sometimes I get offers for "help" when taking photos of knives and multis. :D
[attach id=1 msg=2405892]
-

@LoopCutter said:
I have used the file edge as a metal saw for some light metal material uses. Just adds to the versatility of the Rebar. -
Day 19
Out in the pole barn getting the mower ready for the spring grass cutting season and needed some Pliers.
Rather than use one of the 10 or so sets of Pliers in my toolbox it was Rebar time because, MTO way of course.

-
@HarleyXJGuy said:
Day 19Out in the pole barn getting the mower ready for the spring grass cutting season and needed some Pliers.
Rather than use one of the 10 or so sets of Pliers in my toolbox it was Rebar time because, MTO way of course.

Excellent use Harley
There is only one way and you know it

-
<u>DAY 19</u>
Today I went and collected my new lid (the other one was destroyed by my "assisted off" in Jan)
Until now I had been using my O/G NeoTec as a replacement but it is VERY long in the tooth (as am I ::))
The Rebar blade helped free the new one, same as the old one (minus the scars etc) from its box
NB: It awlso matches the colour of the bike (blue)


-
Lots of great stuff today already

-
Day 19 of 30
Not really anything I do on a Sunday


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login